Difference between revisions of "Frequency maps"

From Planck Legacy Archive Wiki
Jump to: navigation, search
m (General description)
(Other releases: 2020-NPIPE, 2015 and 2013)
 
(90 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{DISPLAYTITLE:Sky temperature and polarization maps}}
+
{{DISPLAYTITLE:Frequency maps in Temperature and Polarization}}
 
 
{{DISPLAYTITLE:2016 Sky temperature and polarization maps}}
 
 
==General description==
 
==General description==
  
Sky maps give the best estimate of the intensity and polarization (Stokes <i>Q</i> and <i>U</i> components), if available, of the signal from the sky after removal, as far as possible, of known systematic effects (mostly instrumental, but including also the solar and Earth-motion dipoles, Galactic stray light, and the zodiacal light).  Sky maps are provided for the full Planck mission using all valid detectors in each frequency channel, and also for various subsets by splitting the mission in various time ranges or in subsets of the detectors in a given channel.  These products are useful for the study of source variability, but they are especially interesting for characterization purposes (see also the [[HFI-Validation | data validation]] section).  The details of the start and end of the time ranges are given in the table below.
+
Sky maps give the best estimate of the intensity and polarization (Stokes <i>Q</i> and <i>U</i> components), if available, of the signal from the sky after removal, as far as possible, of known systematic effects (mostly instrumental, but including also the solar and Earth-motion dipoles, Galactic stray light, and the zodiacal light).  The Planck Collaboration has made three releases of maps, in 2013, 2015 and 2018. This section describes the 2018 release. For descriptions of the other two releases, please go to the sections at the end of this chapter related to 2013 and 2015.
 
 
To help in further processing, there are also masks of the Galactic plane and of point sources, each provided for several different depths.
 
 
 
All sky maps are in HEALPix format, with <i>N</i><sub>side</sub>=1024 (for LFI 30, 44, and 70GHz) and 2048 (for LFI 70GHz and HFI), in Galactic coordinates, and with nested ordering.  
 
  
;WARNING: The HEALPix convention for polarization is <b>not</b> the same as the IAU convention - see Section 8 in this page.
+
In the 2013, 2015 and 2018 releases, sky maps are provided for the full Planck mission using all valid detectors in each frequency channel, and also for various subsets obtained by splitting the mission into various time ranges or into subsets of the detectors in a given channel, or by considering only odd or even pointing periods.  These products are especially interesting for characterization purposes (see also the [[HFI-Validation | data validation]] section), though some are also useful for the study of source variability.  The details of the start and end of the time ranges are given in the table below.
  
The signal is given in units of K<sub>CMB</sub> for 30 to 353 GHz, and of MJy.sr<sup>-1</sup> (for a constant <math>\nu I_\nu</math> energy distribution ) for 545 and 857 GHz.  For each frequency channel, the intensity and polarization maps are packaged into a "BINTABLE" extension of a FITS file together with a hit-counts map (or "hits map", for short, giving the number of observation samples that are accumulated in a pixel, all detectors combined) and with the variance and covariance maps. Additional information is given in the FITS file header.  The structure of the FITS file is given in the [[#FITS_file_structure | FITS file structure]] section below.  
+
For this (2018) release, HFI is providing a more limited subset of maps that include the full channel maps, the half-mission and the odd-even ring splits. Also, note that for the 353 GHz band, both full channel and PSBs only maps are provided, and that by default it is the PBS-only maps that are served.
  
; R2.00 : This first release (Jan 2015) contains polarization data for the 353 GHz channel only.
 
; R2.01 : This second release (May 2015) adds polarization data to the 100-217 GHz channels.
 
; R2.02 : A full re-release to correct the HEALPix bad pixel values in the maps, which was altered during the preparation of the maps and not reset to the correct values (although the valid pixels are unchanged). It also fixes some FITS keywords, and includes a full re-release of the zodiacal light correction maps, with the 100 to 217 GHz ones now including the polarization correction)
 
  
 
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
Line 37: Line 28:
 
|Survey 4 || 636 - 807 || 16692 - 21720 || 03193670 - 04243900 ||
 
|Survey 4 || 636 - 807 || 16692 - 21720 || 03193670 - 04243900 ||
 
|-
 
|-
|Survey 5 || 807 - 974 || 21721 - 27005 || 05267180 - 05322590 || End of mission for HFI
+
|Survey 5 || 807 - 974 || 21721 - 26050 || 05267180 - 05322590 || End of mission for HFI
 
|-
 
|-
 
|Survey 5 || 807 - 993 || n/a || 05267180 - 06344800 || End of survey for LFI
 
|Survey 5 || 807 - 993 || n/a || 05267180 - 06344800 || End of survey for LFI
Line 46: Line 37:
 
|-
 
|-
 
|Survey 8 || 1358 - 1543 || n/a || 06456420 - 06511160 || LFI only  
 
|Survey 8 || 1358 - 1543 || n/a || 06456420 - 06511160 || LFI only  
|-
 
|Survey 9 || 1543 - 1604 || n/a || 06511170 - 06533320 || LFI only Not in this delivery
 
 
|-
 
|-
 
|HFI mission-half-1 || 91 - 531 || 240 - 13471 || 00004200 - 03155580 ||
 
|HFI mission-half-1 || 91 - 531 || 240 - 13471 || 00004200 - 03155580 ||
Line 62: Line 51:
 
|-
 
|-
 
|}
 
|}
 +
 +
To help in further processing, there are also masks of the Galactic plane and of point sources, each provided for several different depths.
 +
 +
All sky maps are in HEALPix format, with <i>N</i><sub>side</sub>=1024 (for LFI 30, 44, and 70GHz) and 2048 (for LFI 70GHz and HFI), in Galactic coordinates, and with nested ordering.
 +
 +
'''WARNING''': The HEALPix convention for polarization is <b>not</b> the same as the IAU convention ([[#Polarization convention used in the Planck project|Section 8 on this page]]).
 +
 +
The signal is given in units of K<sub>CMB</sub> for 30 to 353 GHz, and of MJy.sr<sup>-1</sup> (for a constant &nu;<i>I</i><sub>&nu;</sub> energy distribution) for 545 and 857 GHz.  For each frequency channel, the intensity and polarization maps are packaged into a "BINTABLE" extension of a FITS file together with a hit-counts map (or "hits map", for short, giving the number of observation samples that are accumulated in a pixel, all detectors combined) and with the variance and covariance maps. Additional information is given in the FITS file header.  The structure of the FITS file is given in the [[#FITS_file_structure | FITS file structure]] section below.
  
 
==Production process==
 
==Production process==
  
Sky maps are produced by combining appropriately the data of all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarised) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system.  In particular, they include the Zodiacal light emission (Zodi for short) and also the scattering from the far-side lobes of the beams (FSL).  More on this below.
+
Sky maps are produced by appropriately combining the data from all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarized) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system.  In particular, they include the zodiacal light emission ("zodi" for short) and also the scattering from the far sidelobes of the beams (FSL).  More on this below.
  
 
=== HFI processing ===
 
=== HFI processing ===
  
The mapmaking and calibration process is described in detail in the [[Map-making_LFI | Map-making]] section and in the {{PlanckPapers|planck2014-a09}} paper, where detailed references are found.  In brief it consists of:
+
The mapmaking and calibration process is described in detail in the [[Map-making_LFI | mapmaking]] section and in the {{PlanckPapers|planck2016-XLVI}} paper, where detailed references can be found.  In brief, the timelines are cleaned and calibrated and converted into HealPix rings (HPRs), then ''SRoll'' is applied to destripe them in polarised space (removal of very low frequency noise by minimising differences at ring crossing points), to remove knows systematic effects (including the flux calibration), and to project them onto a HealPix map.
  
; binning the TOI data onto ''rings'' : Healpix rings (HPRs) are used here, each ring containing the combined data of one pointing period.
+
The processing yields maps of the signal, hit counts and auto- and cross-variance maps for the 6 full channel and for a pseudo-channel built from the 353 PSBs only. For each channel HFI provides
; flux calibration : at 100-353 GHz, the flux calibration factors are determined by correlating the signal with the orbital dipole, which is determined very accurately from the Planck satellite orbital parameters provided by Flight Dynamics.  This provides a single gain factor per bolometer.  At 545 and 857 GHz the gain is determined from the observation of Uranus and Neptune (but not Jupiter which is too bright) and comparison to recent models made explicitly for this mission.  A single gain is applied to all rings at these frequencies.
+
* a map for the full mission
; destriping : in order to remove low-frequency noise, an offset per ring is determined by minimizing the differences between HPRs at their crossings, and removed.
+
* two maps for each half-mission
; Zodiacal light correction : a Zodiacal light model is used to build HPRs of the the Zodi emission, which is subtracted from the calibrated HPRs.
+
* two maps for built from odd or even rings only
; projection onto the map : the offset-corrected, flux-calibrated, and Zodi-cleaned HPRs are projected onto Healpix maps, with the data of each bolometer weighted by a factor of 1/NET of that bolometer.
 
  
These steps are followed by some post-processing which is designed to prepare the maps for the component separation work. This post processing consists of:
+
for a total of 35 maps.  
  
; Dust bandpass leakage correction : the Q and U maps are corrected for the intensity-to-polarisation leakage caused by the foregrounds having a non-CMB spectrum, and as a consequence of the non-identical bandpasses on the different detectors (bandpass mismatch, or BPM). This correction is determined using the ''ground'' method as described in Section 7.3 of {{PlanckPapers|planck2014-a09}}. These correction maps can be found in the Planck Legacy Archive as ''HFI_CorrMap_???-dustleak-ground_2048_R2.0?_{coverage}.fits''. The correction is applied by subtracting the correction map from the corresponding input map.  This correction is not applied to the nominal mission maps in order to maintain compatibility with the PR1 products.
+
==== PR3 HFI products ====
; Far Side Lobe calibration correction : the 100-217 maps are multiplied by factors of 1.00087, 1.00046, and 1.00043, respectively, to compensate for the non-removal of the far-side lobes, and similarly the corresponding covariance maps have also been corrected by multiplication by the square of the factor.
 
; Fill missing pixels : missing pixels are filled in with a value that is the mean of valid pixels within a given radius.  A radius of 1 deg is used for the full channel maps, and 1.5 deg is used for the detset maps.  This step is not applied to the single survey maps since they have large swaths of the sky that are not covered.
 
  
; Map zero-level : for the 100 to 857 GHz maps, the zero levels are set to their optimal levels for Galactic and CIB studies. A procedure for adjusting them to astrophysical values is given in the HFI Mapmaking and Calibration paper {{PlanckPapers|planck2014-a09}}.
+
===== Healpix Pixel Rings (HPRs) =====
 +
''SRoll'' main products are the HFI frequency maps. Nevertheless, we also make available the Healpix Pixel Rings (HPRs) of those maps, ie. the data before projection. See [[Healpix_Rings_HFI| description of those files]].
  
These maps provide the main mission products.  Together with signal maps, hit count, variance, and variance maps are also produced. The hit maps give the (integer) number of valid TOI-level samples that contribute to the signal of each pixel. All valid samples are counted in the same way, i.e., there is no weighting factor applied.  The variance maps project the white noise estimate, provided by the NETs, in the sky domain.
+
===== Frequency maps =====
  
Note that the nominal mission maps have not had the post-processing applied, which makes them more easily comparable to the PR1 products.
+
The 35 HFI frequency maps of the PR3 Legacy Release are the followings:
 +
 
 +
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 +
|+ '''PR3 HFI frequency maps'''
 +
|- bgcolor="ffdead"
 +
!
 +
!100 GHz
 +
!143 GHz
 +
!217 GHz
 +
!353 GHz
 +
!353_PSB GHz
 +
!545 GHz
 +
!857 GHz
 +
|-
 +
| Full mission
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I
 +
| I
 +
|-
 +
| Half mission 1
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I
 +
| I
 +
|-
 +
| Half mission 2
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I
 +
| I
 +
|-
 +
| Odd rings
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I
 +
| I
 +
|-
 +
| Even rings
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I, Q, U
 +
| I
 +
| I
 +
|}
 +
 
 +
See [[Frequency_maps|description of those files]]. These maps are available on the [[https://www.cosmos.esa.int/web/planck/pla| Planck Legacy Archive]].
 +
 
 +
 
 +
=== LFI processing ===
 +
LFI maps were constructed with the MADAM mapmaking code, version 3.7.4. The code is based on a generalized destriping technique, where the correlated noise component is modelled as a sequence of constant offsets,  called "baselines". A noise filter was used to constrain the baseline solution, allowing the use of 0.25-s and 1-s baselines for the 30 and 44GHz, and 70 GHz channels, respectively. See section 6 of {{PlanckPapers|planck2016-l02}}.
  
=== LFI processing ===
 
LFI maps were constructed with the Madam map-making code, version 3.7.4. The code is based on generalized destriping technique, where the correlated noise component is modeled as a sequence of constant offset,  called baselines. A noise filter was used to constrain the baseline solution allowing the use of 0.25 s and 1 second baselines for the 30 and 44, 70 GHz respectively.
 
  
Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The used weights are listed in [[Map-making LFI#Map-making|Map-making]]. The flagged samples were excluded from the analysis by setting their weights to <math>C_{w}^{-1}</math> = 0. The galaxy region was masked out in the destriping phase, to reduce error arising from strong signal gradients. The polarization component was included in the analysis...  
+
Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The flagged samples were excluded from the analysis by setting their weights to <i>C</i><sub>w</sub><sup>-1</sup> = 0. The Galaxy region was masked out in the destriping phase, to reduce errors arising from strong signal gradients. The polarization component was included in the analysis.  
  
; Dipole and Far Side Lobe correction : input timelines are cleaned by 4pi convolved dipole and Galactic Straylight obtained as convolution of the 4pi in band far sidelobes and Galactic Simulation as explained in Section 7.4 of {{PlanckPapers|planck2014-a03}}.  
+
; Dipole and Far Side Lobe correction: Input timelines are cleaned by the 4&pi;-convolved dipole and Galactic stray light, obtained as a convolution of the 4&pi; in-band far sidelobes and Galactic simulations, as explained in {{PlanckPapers|planck2016-l02}}.  
  
Beam effects on the LFI maps are described in Section 7.1 of {{PlanckPapers|planck2014-a03}}. Scaling of the maps due to beam effects is taken into account in the LFI's beam functions (as provided in the RIMO, give reference) which should be used for analysis of diffuse components. To compute the flux densities of compact sources, correction must be made for beam effects (see Table 8 of {{PlanckPapers|planck2014-a03}})."
+
Scaling of the maps due to beam effects is taken into account in the LFI's beam functions (as provided in [[The_RIMO|the RIMO]]) which should be used for analysis of diffuse components.
  
; Bandpass leakage correction : '''s opposed to the HFI, the LFI high resolution maps have not been corrected for bandpass leakage. Only low resolution (nside 256) maps are provided with the bandpass correction'''. The correction maps (LFI_CorrMap_0??-BPassCorr_*.fits) can be found in the Planck Legacy Archive. Further details about the procedure used to generate the bandpass correction maps can be found in Section 11 of {{PlanckPapers|planck2014-a03}}.
+
; Bandpass leakage correction :LFI high-resolution maps have been reseleased corrected for bandpass leakage or uncorrected. Further details about the procedure used to generate the bandpass correction maps can be found in section 7 of {{PlanckPapers|planck2016-l02}}.
  
; Map zero-level : for the 30, 44 and 70 GHz, maps are corrected for zero level monopole by applying an offset correction, see LFI Calibration paper {{PlanckPapers|planck2014-a06}}. Note that the offset applied is indicated in the header as a comment keyword.
+
; Map zero-level : The 30, 44 and 70 GHz, maps are corrected for a zero-level monopole by applying an offset correction (see the LFI Calibration paper, {{PlanckPapers|planck2014-a06}}). Note that the offset applied is indicated in the header as a comment keyword.
  
A detailed description of the map-making procedure is given in {{PlanckPapers|planck2013-p02}}, {{PlanckPapers|planck2014-a03}}, {{PlanckPapers|planck2014-a07}} and in section [[Map-making LFI#Map-making|Map-making]].
+
A detailed description of the mapmaking procedure is given in {{PlanckPapers|planck2013-p02}}, {{PlanckPapers|planck2014-a03}}, {{PlanckPapers|planck2014-a07}} and in the [[Map-making LFI#Map-making|Mapmaking]] section here, in {{PlanckPapers|planck2016-l02}} only a summary is reported.
  
==Types of maps ==
+
==Types of map ==
  
=== Full mission, full channel maps (6 HFI, 4 LFI)===
+
=== Full-mission, full-channel maps (7 HFI, 4 LFI)===
  
Full channel maps are built using all the valid detectors of a frequency channel and cover the either the full or the nominal mission.  For HFI, the 143-8 and 545-3 bolometers are rejected entirely as they are seriously affected by RTS noise.  HFI provides the Q and U components for the 100, 143, 217 and 353 GHz channels only. LFI provides the I, Q and U maps for all the channels. Reminder: HFI Q and U maps are corrected for bandpass leakage but LFI Q and U maps are not. The I, Q and U maps are displayed in the figures below. The color range is set using a histogram equalisation scheme (from HEALPIX) that is useful for these non-Gaussian data fields. For visualization purposes, the Q and U maps shown here have been smoothed with a 1 degree Gaussian kernel, otherwise they look like noise to the naked eye.
+
Full channel maps are built using all the valid detectors of a frequency channel and cover either the full or the nominal mission.  For HFI, the 143-8 and 545-3 bolometers are rejected entirely, since they are seriously affected by RTS noise.  HFI provides the Q and U components for the 100, 143, 217 and 353 GHz channels only. LFI provides the <i>I</i>, <i>Q</i>, and <i>U</i> maps for all the channels. Note that the HFI and LFI <i>Q</i> and <i>U</i> maps are corrected for bandpass leakage, version without correction for LFi is also provided. The <i>I</i>, <i>Q</i>, and <i>U</i> maps are displayed in the figures below. The colour range here is set using a histogram equalization scheme (from HEALPix) that is useful for these non-Gaussian data fields. For visualization purposes, the <i>Q</i> and <i>U</i> maps shown here have been smoothed with a 1&deg; Gaussian kernel, otherwise they look like noise to the naked eye. The 70 GHz full map is also available at <i>N</i><sub>side</sub>=2048.
The 70 GHz full map is available also at <math>N_{side}</math> 2048.
 
  
The high dynamic range color scheme of the Planck maps is described [https://wiki.cosmos.esa.int/planck-legacy-archive/index.php/Planck_high_dynamic_range_colour_palette HERE]
+
The high dynamic range colour scheme of the Planck maps is described [https://wiki.cosmos.esa.int/planck-legacy-archive/index.php/Planck_high_dynamic_range_colour_palette here].
  
 
<center>
 
<center>
 
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>  
 
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>  
File: SkyMap30e.png| '''Full mission I, 30 GHz'''
+
File: LFI_030GHz_dx12_I.png| '''Full mission <i>I</i>, 30 GHz.'''
File: SkyMap44e.png | '''Full mission I, 44 GHz'''
+
File: LFI_044GHz_dx12_I.png| '''Full mission <i>I</i>, 44 GHz.'''
File: SkyMap70e.png | '''Full mission I, 70 GHz'''
+
File: LFI_070GHz_dx12_I.png| '''Full mission <i>I</i>, 70 GHz.'''
File: SkyMap100e.png | '''Full mission I, 100 GHz'''
+
File: HFI_SkyMap_100_2048_R3.00_full_T.png| '''Full mission <i>I</i>, 100 GHz.'''
File: SkyMap143e.png | '''Full mission I, 143 GHz'''
+
File: HFI_SkyMap_143_2048_R3.00_full_T.png| '''Full mission <i>I</i>, 143 GHz.'''
File: SkyMap217e.png | '''Full mission I, 217 GHz'''
+
File: HFI_SkyMap_217_2048_R3.00_full_T.png| '''Full mission <i>I</i>, 217 GHz.'''
File: SkyMap353e.png | '''Full mission I, 353 GHz'''
+
File: HFI_SkyMap_353-psb_2048_R3.00_full_T.png| '''Full mission <i>I</i>, 353 GHz.'''
File: SkyMap545e.png | '''Full mission I, 545 GHz'''
+
File: HFI_SkyMap_545_2048_R3.00_full_T.png| '''Full mission <i>I</i>, 545 GHz.'''
File: SkyMap857e.png | '''Full mission I, 857 GHz'''
+
File: HFI_SkyMap_857_2048_R3.00_full_T.png| '''Full mission <i>I</i>, 857 GHz.'''
</gallery>
+
</gallery>
</center>
+
</center>
<br>
+
<br>
 
<center>
 
<center>
 
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>  
 
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>  
File: LFI_SkyMap_030_1024_R2.01_full_Qb_sm1deg.png| '''Full mission Q, 30 GHz'''
+
File: LFI_030GHz_dx12_Q.png| '''Full mission <i>Q</i>, 30 GHz.'''
File: LFI_SkyMap_044_1024_R2.01_full_Qb_sm1deg.png | '''Full mission Q, 44 GHz'''
+
File: LFI_044GHz_dx12_Q.png | '''Full mission <i>Q</i>, 44 GHz.'''
File: LFI_SkyMap_070_1024_R2.01_full_Qb_sm1deg.png | '''Full mission Q, 70 GHz'''
+
File: LFI_070GHz_dx12_Q.png | '''Full mission <i>Q</i>, 70 GHz.'''
File: HFI_Skymap_100_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 100 GHz'''
+
File: HFI_SkyMap_100_2048_R3.00_full_Q_sm30arcmin.png | '''Full mission <i>Q</i>, 100 GHz.'''
File: HFI_Skymap_143_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 143 GHz'''
+
File: HFI_SkyMap_143_2048_R3.00_full_Q_sm30arcmin.png | '''Full mission <i>Q</i>, 143 GHz.'''
File: HFI_Skymap_217_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 217 GHz'''
+
File: HFI_SkyMap_217_2048_R3.00_full_Q_sm30arcmin.png | '''Full mission <i>Q</i>, 217 GHz.'''
File: HFI_Skymap_353_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 353 GHz'''
+
File: HFI_SkyMap_353-psb_2048_R3.00_full_Q_sm30arcmin.png | '''Full mission <i>Q</i>, 353 GHz.'''
 
</gallery>
 
</gallery>
 
</center>
 
</center>
Line 141: Line 197:
 
<center>
 
<center>
 
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>  
 
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>  
File: LFI_SkyMap_030_1024_R2.01_full_Ub_sm1deg.png| '''Full mission U, 30 GHz'''
+
File: LFI_030GHz_dx12_U.png| '''Full mission <i>U</i>, 30 GHz.'''
File: LFI_SkyMap_044_1024_R2.01_full_Ub_sm1deg.png | '''Full mission U, 44 GHz'''
+
File: LFI_044GHz_dx12_U.png | '''Full mission <i>U</i>, 44 GHz.'''
File: LFI_SkyMap_070_1024_R2.01_full_Ub_sm1deg.png | '''Full mission U, 70 GHz'''
+
File: LFI_070GHz_dx12_U.png | '''Full mission <i>U</i>, 70 GHz.'''
File: HFI_Skymap_100_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 100 GHz'''
+
File: HFI_SkyMap_100_2048_R3.00_full_U_sm30arcmin.png | '''Full mission <i>U</i>, 100 GHz.'''
File: HFI_Skymap_143_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 143 GHz'''
+
File: HFI_SkyMap_143_2048_R3.00_full_U_sm30arcmin.png | '''Full mission <i>U</i>, 143 GHz.'''
File: HFI_Skymap_217_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 217 GHz'''
+
File: HFI_SkyMap_217_2048_R3.00_full_U_sm30arcmin.png | '''Full mission <i>U</i>, 217 GHz.'''
File: HFI_Skymap_353_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 353 GHz'''
+
File: HFI_SkyMap_353-psb_2048_R3.00_full_U_sm30arcmin.png | '''Full mission <i>U</i>, 353 GHz.'''
 
</gallery>
 
</gallery>
  
 
</center>
 
</center>
  
 +
=== Full mission light maps, full channel maps (7 HFI, 7 LFI)===
 +
 +
These maps are based on the Full mission maps but contain fewer columns, IQU from 30 to 353 GHz, and I only at 545 and 857 GHz. These maps have been produced to reduce the transfer time of the most downloaded frequency full mission maps.
  
=== Nominal mission, full channel maps (6 HFI)===
+
=== Single-survey, full-channel maps (35 LFI)===
  
These maps are similar to the ones above, but cover the nominal mission onlyThey are meant primarily to be compared to the PR1 products in order to see the level of improvements in the processingBecause of this, they are produced in Temperature only, and have not had the post-processing applied.
+
Single-survey maps are built using all valid detectors of a frequency channel; they separately cover the different sky surveys.  The surveys are defined as the times over which the satellite spin axis rotates by 180&deg;, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between about 80% and 90%, depending on detector position.  During adjacent surveys the sky is scanned in opposite directions (more precisely it is the ecliptic equator that is scanned in opposite directions)While these are useful to investigate variable sources, they are also used to study the systematics of the time-response of the detectors as they scan bright sources, like the Galactic Plane, in different directions during different surveyNote that the HFI and LFI missions cover five and eight surveys, respectively, and in the case of HFI the last survey in incomplete.
 +
The 70 GHz survey maps are available also at <i>N</i><sub>side</sub>=2048. Note that LFI provides a special survey-map combination used in the low-&#8467; analysis; this maps, available at the three LFI frequencies, 30, 44, and 70 GHz, was built using the combination of Surveys 1, 3, 5, 6, 7, and 8.
  
=== Single survey, full channel maps (30 HFI, 35 LFI)===
+
=== Year maps, full-channel maps (16 LFI)===
  
Single survey maps are built using all valid detectors of a frequency channel; they cover separately the different sky surveys.  The surveys are defined as the times over which the satellite spin axis rotates but 180 degrees, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between ~80 and 90% depending on detector position.  During adjacent surveys the sky is scanned in opposite directions. More precisely it is the ecliptic equator that is scanned in opposite directionsWhile these are useful to investigate variable sources, they are also used to study the systematics of the time-response of the detectors as they scan bright sources, like the Galactic Plane, in different directions during different survey. Note that the HFI and LFI missions cover 5 and 8 surveys, respectively, and in case of HFI the last survey in incomplete.
+
These maps are built using the data of Surveys 1+2, Surveys 3+4, and so forthThey are used to study long-term systematic effects. The 70 GHz years maps are available also at <i>N</i><sub>side</sub>=2048.
The 70 GHz surveys maps are available also at <math>N_{side}</math> 2048.
 
Note LFI provide a special surveys maps combination used in the low l analysis. This maps, available at the three LFI frequency 30, 44 and 70 GHz, was built using the combination of survey 1, 3, 5, 6, 7 and 8.  
 
  
=== Year maps, full channel maps (12 HFI, 16 LFI)===
+
===Half-mission maps, full-channel maps (14 HFI, 12 LFI)===
  
These maps are built using the data of surveys 1+2, surveys 3+4, and so forthThey are used to study long-term systematic effects.
+
For HFI, the half mission is defined after eliminating those rings that are discarded for all bolometers, many of which occurred during the 5th survey when the "End-of-Life" tests were performedThe remaining rings are divided in half to define the two halves of the mission. This exercise is done for the full mission only.
The 70 GHz years maps are available also at <math>N_{side}</math> 2048.
 
  
===Half-mission maps, full channel maps (12 HFI, 12 LFI)===
+
For LFI, instead of the half-mission maps, the following year combinations have been created: Year 1+2, Year 1+3, Year 2+4, Year 3+4,
  
For HFI, the half mission is defined after eliminating those rings discarded for all bolometers. There are 347 such rings, may of which are during the 5th survey when the ''End-of-Life'' tests were performed.  The remaining 26419 rings are divided in half (up to the odd ring) to define the two halves of the mission.  This exercise is done for the full mission only.
+
===Full mission, single-detector maps (22 LFI)===
  
For LFI instead of the half-mission the following year combination has been created: Year 1+2, Year 1+3, Year 2+4, Year 3+4,  
+
For LFI, all the 22 Radiometers maps are available, and (obviously) only in Stokes <i>I</i>.
  
===Full mission, single detector maps (18 HFI, 22 LFI)===
+
===Full-mission, detector-set or detector-pairs maps (8 LFI)===
  
IN case of HFI these maps are built only for the SWBs (non polarized) and contain only temperature data, of course.  They are not built for the polarisation sensitive detectors because they are not fixed on the sky as the polarisation component depends on the position angle at the time of observationInstead, we provide maps built by ''quads'' of polarisation-sensitive detectors (see next section), which have different polarisation angles and that can be used to built I, Q, and U maps
+
The objective here is to build independent temperature (<i>I</i>) and polarization (<i>Q</i> and <i>U</i>) maps using the two pairs of polarization-sensitive detectors of each channel where they are available, i.e., for the 44-353 GHz channelsThe table below indicates which detectors were used to build each detector set (detset).
  
 
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
 
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
|+ '''HFI Temperature sensitive bolometers'''
+
|+ '''Definition of LFI detector pairs'''
 
|- bgcolor="ffdead"   
 
|- bgcolor="ffdead"   
!Frequency || Detector names
+
!Frequency || Horn pair || Comment
 
|-
 
|-
|143 GHz || 143-5, 6, 7
+
|44 GHz || 24 || This map is only in temperature
 
|-
 
|-
|217 GHz || 217-1, 2, 3, 4
+
|44 GHz || 25  and 26 ||
 
|-
 
|-
|353 GHz || 353-1, 2, 7, 8
+
|70 GHz || 18 and 23 || Available also at <i>N</i><sub>side</sub>=2048
 
|-
 
|-
|545 GHz || 545-1, 2, 4
+
|70 GHz || 19 and 22 || Available also at <i>N</i><sub>side</sub>=2048
 
|-
 
|-
|857 GHz || 857-1, 2 , 3, 4
+
|70 GHz || 20 and 21 || Available also at <i>N</i><sub>side</sub>=2048
 
|}
 
|}
  
The 143-8 and 353-3 bolometer data are affected by strong RTS (random telegraphic signal) noise.  They have not been used in the data processing, and are not delivered. For a figure showing the focal plane layout, see [[Detector_pointing#Introduction_and_Summary | this Introduction]] of the Detector Pointing chapter.
+
===Half-ring maps (62 LFI)===
 +
 
 +
These maps are similar to the ones described above, but are built using only the first or the second halves of each ring (or pointing period).  The HFI provides half-ring maps for the full mission only, as well as for the full channel, the detsets, and the single bolometers. The LFI provides half-ring maps for the full mission in each channel (70 GHz also at <i>N</i><sub>side</sub>=2048), for the full-mission radiometers, and for the full-mission horn pairs.
 +
 
 +
=== Odd and even rings maps (14 HFI)
 +
 
 +
As the name indicates, these are generated by using only the odd or only the even rings.
 +
 
 +
=== Caveats and known issues ===
  
In case of LFI, all the 22 Radiometers maps are available, those, obviously, are only in temperature.
+
==== HFI frequency maps ====
 +
Some imperfections have shown up in the tests of the HFI PR3 maps that were previously hidden by higher-level systematics in the previous PR2 data. These lead to guidelines for the proper use of the HFI PR3 data. See {{PlanckPapers|planck2016-l03}} for a detailed description of all these issues.
  
===Full mission, detector set or detector pairs maps (8 HFI, 8 LFI)===
+
<span style="color:#ff0000"> Update 12 Sep 2018:</span> Covariance matrices in PR3.00 frequency maps FITS files were not correctly computed and contained wrong values. They must not be used for any purpose. These maps have been removed from the PLA. Version 3.01 must be used instead. Intensity, polarization and hit count maps have not changed.
  
The objective here is to build independent temperature (I) and polarisation (Q and U) maps with the two pairs of polarisation sensitive detectors of each channel where they are available, i.e. in the 44-353 GHz channelsThe table below indicates which detectors were used to built each detector set (detset).
+
===== Monopoles =====
 +
Monopoles, which cannot be extracted from Planck data alone, are adjusted at each frequency (as was done in the previous PR2 release). For component separation, this provides maps that can be used directly in combination with other tracers. See {{PlanckPapers|planck2016-l03}} for a detailed discussion.
 +
In the 2018 maps, three monopoles have been adjusted:
 +
* during production of the HFI frequency maps, an HI correlation analysis is carried out to adjust the overall monopole of the map to be consistent with the intensity of the Galactic dust foreground at high galactic latitudes (this adjustment was also done in the 2016 maps)
 +
* a monopole corresponding to the zero-level of the CIB (Cosmic Infrared Background) estimated from a galaxy evolution model has been added to the maps (as for the 2016 maps)
 +
* a monopole corresponding to the zero-level of zodiacal emission, representative of the high ecliptic latitude emission regions, has been added to the maps (note that this was not done in the 2016 maps).
 +
It is recommended that for work separating CMB and diffuse Galactic components from HFI frequency maps, the CIB and Zodiacal emission monopoles should first be removed. Furthermore, especially for applications at low intensity, it is critical to appreciate that there are significant uncertainties in the zero levels in the Galactic maps. It is therefore also recommended that the maps be correlated with the HI map at high latitude, following the detailed methodology set out in {{PlanckPapers|planck2013-p03b}} and {{PlanckPapers||planck2013-p06}}Consideration should also be given to the possible effect of dust in the warm ionized medium, as discussed and quantified in {{PlanckPapers||planck2016-l12}}.
  
 +
===== Solar dipole residual=====
 +
The ''Planck'' 2015 Solar dipole is removed from the PR3 HFI maps to be consistent with LFI maps and to facilitate comparison with the previous PR2 ones. The best Solar dipole determination from HFI PR3 data shows a small shift in direction of about 1', but a 1.8 &mu;K lower amplitude. Removal of the ''Planck'' 2015 Solar dipole thus leaves a small but non-negligible dipole residual in the HFI PR3 maps. To correct for this, and adjust maps at the best photometric calibration, users of the HFI PR3 maps should:
 +
# put back into the maps the ''Planck'' 2015 Solar dipole (d,l,b)= (3364.5 &plusmn; 2.0 &mu;K, 264.00 &plusmn; 0.03&deg;, 48.24 &plusmn; 0.02&deg;),
 +
# include the [[#Calibration accuracy|absolute calibration frequency bias]], i.e., multiply by 1 minus the calibration bias,
 +
# lastly, remove the [[#HFI 2018 Solar dipole|HFI 2018 Solar dipole]].
  
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
+
=====Use of the 353 GHz SWBs =====  
|+ '''Definition of HFI Detector Sets'''
+
In 2018, two types of maps at 353 GHz are provided, one including only PSBs and one including both PSBs and SWBs. For reasons detailed in {{planckPapers|planck2016-l03}}, it is recommended to use the former (i.e. only including PSBs). The alternative one including the 353 GHz SWBs should be used only for specific uses such as, for example, increasing the signal to noise level at high multipoles.
|- bgcolor="ffdead" 
 
!Frequency || DetSet1 || DetSet2
 
|-
 
|100 GHz || 100-1a/b  & 100-4a/b || 100-2a/b & 100-3a/b
 
|-
 
|143 GHz || 143-1a/b 1 & 43-3a/b || 143-2a/b & 143-4a/b
 
|-
 
|217 GHz || 217-5a/b & 217-7a/b || 217-6a/b & 217-8a/b
 
|-
 
|353 GHz || 353-3a/b & 353-5a/b || 353-4a/b & 353-6a/b
 
|}
 
  
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
+
===== Color correction and component separation=====
|+ '''Definition of LFI Detector Pairs'''
+
In 2018 the SRoll algorithm has been used to produce the frequency maps. This algorithms adjusts by construction all single bolometer maps to the band average response. For this reason, it becomes impossible to use the different individual bolometer responses to extract foreground component maps, and the individual bolometer maps are not provided as part of the release. See {{PlanckPapers|planck2016-l03}} for a detailed description. Note also that for the same reason, the effective bandpass response of the 2018 maps is not the same as for the 2015 maps. The new bandpass response is established in the 2018 RIMO.
|- bgcolor="ffdead" 
 
!Frequency || Horn Pair || Comment
 
|-
 
|44 GHz || 24 || This maps is only in temperature
 
|-
 
|44 GHz || 25  & 26 ||
 
|-
 
|70 GHz || 18 & 23 || Available also at <math>N_{side}</math> = 2048
 
|-
 
|70 GHz || 19 & 22 || Available also at <math>N_{side}</math> = 2048
 
|-
 
|70 GHz || 20 & 21 || Available also at <math>N_{side}</math> = 2048
 
|}
 
  
 +
===== Sub-pixel effects in very bright regions=====
 +
The bandpass corrections have been optimized for high latitude regions which implied to reduce the noise of the CO and dust bandpass templates to avoid the introduction of significant correlated noise. The effect is negligible for dust but not for CO in very bright regions. As a consequence, some systematic effects (which appear as striping) appear in some of the maps in the brightest galactic emission regions. See [[subpixel_HFI|detailed description]].
  
===Half-ring maps (64 HFI, 62 LFI)===
+
==== LFI Frequency maps ====
  
These maps are similar to the ones above, but are built using only the first or the second half of each ring (or pointing period).  The HFI provides half-ring maps for the full mission only, and for the full channel, the detsets, and the single bolometers. The LFI provides half-rings maps for the channel full mission (70 GHz also at <math>N_{side}</math> 2048), for the radiometer full mission and the horn pairs full mission.
+
'''TBD'''
<!----
 
===Masks===
 
 
 
Masks are provided of the Galactic Plane and of the point sources.  For the Galactic Plane, eight masks are given covering different fractions of the sky, and for the points sources two masks are given, at the 5 and 10 sigma level, for each Planck HFI and LFI frequency channel. These are generic masks, specific masks applicable to other products are delivered with the products themselves.
 
--->
 
 
 
=== The Zodiacal light correction maps ===
 
 
 
The Zodiacal light signal depends on the location of the observer relative to the Zodiacal light bands, and thus it is not a fixed pattern on the sky but depends on the period of observation. The maps presented here are the difference between the uncorrected (and not delivered) and the corrected maps. 
 
 
 
Note that while the Zodiacal light model that is subtracted at ring level (see [[Map-making#Zodiacal_light_correction | here]]) is not polarised, the corrections are not null and Q and U.  This is suspected to come from some combination of leakage due to bandpass differences and beam mismatch, and maybe other effects. These leakages are typically of order a few %, at max, of the maximum zodi intensity at I for each channel. They range from ~150 nK at 100 GHz to ~5 uK at 353 GHz.
 
 
 
=== Caveats and known issues ===
 
 
 
; HFI polarization 100-217 GHz : at low multipoles, despite the progress that has been made to control the systematic effects present in the maps, polarization data between 100-217 GHz are still contaminated by systematic residuals. Figure 10 of {{PlanckPapers|planck2014-a09}} shows the EE power spectra from the half-difference maps at 100, 143, and 217 GHz and compared to the noise power spectrum from FFP8 simulations. he half-ring differences are compatible with noise while, at multipoles typically lower than 50, detector-set and half-mission differences are dominated by excess power which is larger than the EE CMB signal. The Planck Collaboration has used the range ell>30 to carry out component separation ({{PlanckPapers|planck2014-a11}}), as data at ell<30 is not considered usable for cosmological analyses. The origin of the excess power will be explored in a forthcoming publication.
 
 
  
 
==Inputs==
 
==Inputs==
Line 258: Line 297:
  
 
The HFI mapmaking takes as input:
 
The HFI mapmaking takes as input:
* the cleaned TOIs of signal of each detector, together with their flags, produced by the [[TOI processing|TOI processing]] pipeline;
+
* the cleaned TOIs of the signal from each detector, together with their flags, produced by the [[TOI processing|TOI processing]] pipeline;
 
* the TOIs of pointing (quaternions), described in [[Detector_pointing|Detector pointing]];
 
* the TOIs of pointing (quaternions), described in [[Detector_pointing|Detector pointing]];
 
* bolometer-level characterization data, from the DPC's internal IMO (not distributed);
 
* bolometer-level characterization data, from the DPC's internal IMO (not distributed);
 
* Planck orbit data, used to compute and remove the Earth's dipole;
 
* Planck orbit data, used to compute and remove the Earth's dipole;
 
* Planck solar dipole information, used to calibrate the CMB channels;
 
* Planck solar dipole information, used to calibrate the CMB channels;
* Planet models used to calibrate the Galactic channels.
+
* planet models used to calibrate the Galactic channels.
  
 
=== LFI inputs ===
 
=== LFI inputs ===
  
The Madam mapmaker takes as input:
+
The MADAM mapmaker takes as input:
 
 
 
* the calibrated timelines (for details see [[TOI processing LFI|TOI Processing]]);
 
* the calibrated timelines (for details see [[TOI processing LFI|TOI Processing]]);
 
* the detector pointings (for details see [[Detector_pointing|Detector pointing]]);
 
* the detector pointings (for details see [[Detector_pointing|Detector pointing]]);
* the noise information in the form of 3-parameter (white noise level, &sigma;, slope, and knee frequency, <i>f</i><sub>knee</sub>) noise model (for details see [[The RIMO|RIMO]])
+
* the noise information in the form of 3-parameter (white noise level &sigma;, slope, and knee frequency <i>f</i><sub>knee</sub>) noise model (for details see [[The RIMO|RIMO]]).
  
 
==Related products==
 
==Related products==
 
=== Masks ===
 
=== Masks ===
 +
This section presents the "general purpose" masks.  Other masks specific to certain products are packaged with those products.
  
This section presents the masks of the point sources and of the Galactic planeThese are ''general purpose'' masks.  Other masks specific to certain products are packaged with the products.
+
Note that for this release, HFI has not produced any new masks.   
  
====Point source masks====
+
====Point source masks ====
  
For HFI and LFI two sets of masks are provided:  
+
For HFI and LFI two sets of point-source masks are provided.  
* Intensity masks, which removes sources detected with SNR > 5.  
+
* Intensity masks, which remove sources detected with S/N > 5.  
* Polarisation masks, which remove sources which have polarisation detection significance of 99.97 % or greater at the position of a source detected in intensity.  They were derived from the polarisation maps with dust ground bandpass mismatch leakage correction applied. The cut around each source has a radius of 3σ (width) of the beam ~ 1.27 FWHM (for LFI the cut around each source has a radius of 32 arcmin at 30GHz, 27 arcmin at 44 GHz and 13 arcmin at 70 GHz).
+
* Polarisation masks, which remove sources that have polarization detection significance levels of 99.97 % or greater at the position of a source detected in intensity.  They were derived from the polarization maps with dust foreground bandpass mismatch leakage corrections applied. The area excised around each source has a radius of 3σ (width) of the beam, i.e., 1.27 FWHM (for LFI the cut around each source has a radius of 32 arcmin at 30GHz, 27 arcmin at 44 GHz, and 13 arcmin at 70 GHz).
  
Both sets are found in the files ''HFI_Mask_PointSrc_2048_R2.00.fits'' and  ''LFI_Mask_PointSrc_2048_R2.00.fits'' in which the first extension contains the Intensity masks, and the second contains the Polarisation masks.
+
Both sets of masks are found in the files ''HFI_Mask_PointSrc_2048_R2.00.fits'' and  ''LFI_Mask_PointSrc_2048_R2.00.fits'', in which the first extension contains the intensity masks, and the second contains the polarization masks.
  
====Galactic plane masks====
+
====Galactic plane masks ====
  
Eight masks are provided giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage derived from the 353 GHz map, after CMB subtraction. They are independent of frequency channel. Three versions of these are given: not apodized, and apodized by 2 and 5 deg.  The filenames are ''HFI_Mask_GalPlane-apoN_2048_R2.00.fits'', where N = 0, 2, 5.
+
Eight Galactic emission masks are provided, giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage, derived from the 353 GHz map after CMB subtraction. These are independent of frequency channel. Three versions are given: not apodized; and apodized by 2&deg; and 5&deg;.  The filenames are ''HFI_Mask_GalPlane-apoN_2048_R2.00.fits'', where <i>N</i> = 0, 2, and 5.
  
The masks are shows below. The 8 GalPlane masks are combined (added together) and shown in a single figure for each of the three apodization.  While the result is quite clear for the case of no apodization, it is less so for the apodized case.  The point source masks are shown separately for the Intensity case.
+
The masks are shown below. The eight "GalPlane" masks are combined (added together) and shown in a single figure for each of the three apodizations.  While the result is quite clear for the case of no apodization, it is less so for the apodized case.  The "PointSrc" masks are shown separately for the intensity case.
  
 
<center>
 
<center>
 
<gallery perrow=3 widths=260px heights=160px >
 
<gallery perrow=3 widths=260px heights=160px >
File: GalPlaneMask_apo0.png |  '''Galactic Plane masks, no apod'''
+
File: GalPlaneMask_apo0.png |  '''Galactic plane masks, no apodization.'''
File: GalPlaneMask_apo2.png |  '''Galactic Plane masks, apod 2 deg'''
+
File: GalPlaneMask_apo2.png |  '''Galactic plane masks, apodized to 2&deg;.'''
File: GalPlaneMask_apo5.png |  '''Galactic Plane masks, apod 5 deg'''
+
File: GalPlaneMask_apo5.png |  '''Galactic plane masks, apodized to 5&deg;.'''
File: PointSrcMask_100.png | '''PointSource mask 100 GHz'''
+
File: PointSrcMask_100.png | '''Point source mask, 100 GHz.'''
File: PointSrcMask_143.png | '''PointSource mask 143 GHz'''
+
File: PointSrcMask_143.png | '''Point source mask, 143 GHz.'''
File: PointSrcMask_217.png | '''PointSource mask 217 GHz'''
+
File: PointSrcMask_217.png | '''Point source mask, 217 GHz.'''
File: PointSrcMask_353.png | '''PointSource mask 343 GHz'''
+
File: PointSrcMask_353.png | '''Point source mask, 343 GHz.'''
File: PointSrcMask_545.png | '''PointSource mask 545 GHz'''
+
File: PointSrcMask_545.png | '''Point source mask, 545 GHz.'''
File: PointSrcMask_857.png | '''PointSource mask 857 GHz'''
+
File: PointSrcMask_857.png | '''Point source mask, 857 GHz.'''
</gallery>
+
</gallery>
 
</center>
 
</center>
  
 
== File names ==
 
== File names ==
The FITS filenames are of the form ''{H|L}FI_SkyMap_fff{-tag}_Nside_R2.nn_{coverage}-{type}.fits'', where ''fff'' are three digits to indicate the Planck frequency band, ''tag'' indicates the single detector or the detset,  ''Nside'' is the Healpix Nside of the map, ''coverage'' indicates which part of the mission is covered (full, half mission, survey, year, ...) , and the optional ''type'' indicates the subset of input data used.  The table below lists the products by type, with the appropriate unix wildcards that form the full filename.
+
The FITS filenames are of the form ''{H|L}FI_SkyMap_fff{-tag}_Nside_R3.nn_{coverage}-{type}.fits'', where "fff" are three digits to indicate the Planck frequency band, "tag" indicates the single detector or the detset (no "tag" indicates full channel)"Nside" is the HEALPix <i>N</i><sub>side</sub> value of the map, "coverage" indicates which part of the mission is covered (full, half mission, survey, year, etc.), and the optional "type" indicates the subset of input data used.  The table below lists the products by type, with the appropriate unix wildcards that form the full filename.
  
 
{| class="wikitable"  align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=880px
 
{| class="wikitable"  align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=880px
 
|+ '''HFI FITS filenames'''
 
|+ '''HFI FITS filenames'''
 
|- bgcolor="ffdead"
 
|- bgcolor="ffdead"
! Coverage  ||  filename  ||  half-ring filename
+
! Coverage  ||  Filename
|-
 
| Full chan, full mission ||HFI_SkyMap_???_2048_R2.??_full.fits ||HFI_SkyMap_???_2048_R2.??_full-ringhalf-?.fits
 
 
|-
 
|-
| Full channel, nominal mission ||HFI_SkyMap_???_2048_R2.??_nominal.fits || n/a
+
| Full channel, full mission ||HFI_SkyMap_fff{-tag}_2048_R3.??_full.fits
 
|-
 
|-
| Full channel, single survey || HFI_SkyMap_???_2048_R2.??_survey-?.fits || n/a
+
| Full channel, half mission || HFI_SkyMap_fff{-tag}_2048_R3.??_halfmission-{1/2}.fits
 
|-
 
|-
| Full channel, single year || HFI_SkyMap_???_2048_R2.??_year-?.fits  || n/a
+
| Full channel, full mission, odd/even ring || HFI_SkyMap_fff{-tag}_2048_R3.??_{odd/even}ring.fits  
|-
 
| Full channel, half mission || HFI_SkyMap_???_2048_R2.??_halfmission*-?.fits || n/a
 
|-
 
| Det-set, full mission || HFI_SkyMap_???-ds?_2048_R2.??_full.fits || HFI_SkyMap_???-ds?_2048_R2.??_full-ringhalf-?.fits
 
|-
 
|Single SWB, full mission || HFI_SkyMap_???-?_2048_R2.??_full.fits || HFI_SkyMap_???-?_2048_R2.??_full-ringhalf-?.fits
 
 
|}
 
|}
  
{| class="wikitable"  align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=1000px
+
{| class="wikitable"  align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=1600px
 
|+ '''LFI FITS filenames'''
 
|+ '''LFI FITS filenames'''
 
|- bgcolor="ffdead"
 
|- bgcolor="ffdead"
! Coverage  ||  filename ||  half-ring filename || Comment
+
! Coverage  ||  Filename ||  Half-ring filename || Comment
 
|-
 
|-
| Full channel, full mission ||LFI_SkyMap_???_1024_R2.??_full.fits ||LFI_SkyMap_???_1024_R2.??_full-ringhalf-?.fits || Available also at Nside = 2048
+
| Full channel, full mission ||LFI_SkyMap_???_1024_R3.??_full.fits ||LFI_SkyMap_???_1024_R3.??_full-ringhalf-?.fits || 70GHz is corrected for Template
 
|-
 
|-
| Full channel, single survey || LFI_SkyMap_???_1024_R2.??_survey-?.fits || n/a || Available also at Nside = 2048
+
| Full channel, full mission BandPass corrected ||LFI_SkyMap_???-BPassCorrected_1024_R3.??_full.fits ||LFI_SkyMap_???-BPassCorrected_???_1024_R3.??_full-ringhalf-?.fits || 70GHz is corrected for Template
 +
|-
 +
| Full channel, single survey || LFI_SkyMap_???_1024_R3.??_survey-?.fits || n/a || n/a
 +
|-
 +
| Full channel, survey combination || LFI_SkyMap_???_1024_R3.??_survey-1-3-5-6-7-8.fits || n/a || n/a
 +
|-
 +
| Full channel, survey combination BandPass corrected|| LFI_SkyMap_???_1024_R3.??-BPassCorrected_survey-1-3-5-6-7-8.fits || n/a || n/a
 +
|-
 +
| Full channel, single year || LFI_SkyMap_???_1024_R3.??_year-?.fits  || n/a || n/a
 
|-
 
|-
| Full channel, survey combination || LFI_SkyMap_???_1024_R2.??_survey-1-3-5-6-7-8.fits || n/a || n/a
+
| Full channel, single year BandPass corrected|| LFI_SkyMap_???-BPassCorrected_1024_R3.??_year-?.fits || n/a || n/a
 
|-
 
|-
| Full channel, single year || LFI_SkyMap_???_1024_R2.??_year-?.fits || n/a || Available also at Nside = 2048
+
| Full channel, year combination || LFI_SkyMap_???_1024_R3.??_year?-?.fits || n/a || n/a
 
|-
 
|-
| Full channel, year combination || LFI_SkyMap_???_1024_R2.??_year?-?.fits || n/a || n/a
+
| Full channel, year combination BandPass corrected|| LFI_SkyMap_???-BPassCorrected_1024_R3.??_year?-?.fits || n/a || n/a
 
|-
 
|-
| Horn pair, full mission || LFI_SkyMap_???-??-??_1024_R2.??_full.fits || LFI_SkyMap_???_??-??_1024_R2.??_full-ringhalf-?.fits || Available also at Nside = 2048
+
| Horn pair, full mission || LFI_SkyMap_???-??-??_1024_R3.??_full.fits || LFI_SkyMap_???_??-??_1024_R3.??_full-ringhalf-?.fits || n/a
 
|-
 
|-
| Single radiometer, full mission || LFI_SkyMap_???-???_1024_R2.??_full.fits || LFI_SkyMap_???-???_1024_R2.??_full-ringhalf-?.fits || n/a
+
| Single radiometer, full mission || LFI_SkyMap_???-???_1024_R3.??_full.fits || LFI_SkyMap_???-???_1024_R3.??_full-ringhalf-?.fits || n/a
 
|}
 
|}
  
 +
For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the nine frequency maps as separate columns in a single extension. The nine columns in this file contain the intensity maps <i>only</i> and no other information (hits maps or variance maps) is provided.
 +
 +
== FITS file structure ==
 +
 +
The FITS files for the sky maps contain a minimal primary header with no data, and a ''BINTABLE'' extension (EXTENSION 1, EXTNAME = ''FREQ-MAP'') containing the data.  The structure is shown schematically in the figure below.  The ''FREQ-MAP'' extension contains a 3- or 10-column table that contain the signal, hit-count, and variance maps, all in HEALPix format.  The 3-column case is for intensity only maps, while the 10-column case is for polarization. The number of rows is the number of map pixels, which is <i>N</i><sub>pix</sub> = 12 <i>N</i><sub>side</sub><sup>2</sup> for HEALPix maps, where <i>N</i><sub>side</sub> = 1024 or 2048 for most the maps presented in this section.
 +
 +
[[File:FITS_FreqMap.png | 550px  | center | thumb | '''FITS file structure.''']]
  
 +
Note that file sizes are approximately 0.6 GB for <i>I</i>-only maps and 1.9 GB for <i>IQU</i> maps at <i>N</i><sub>side</sub>=2048, but about 0.14 GB for <i>I</i>-only maps and 0.45 GB for <i>IQU</i> maps at <i>N</i><sub>pix</sub>=1024 .
  
For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the 9 frequency maps as separate columns in a single extension. The 9 columns in this file contain the intensity maps ONLY and no other information (hit maps and variance maps) is provided.
+
Keywords indicate the coordinate system ("GALACTIC"), the HEALPix ordering scheme ("NESTED"), the units (K<sub>CMB</sub> or MJy.sr<sup>-1</sup>) of each column, and of course the frequency channel ("FREQ"). Where polarization <i>Q</i> and <i>U</i> maps are provided, the "COSMO" polarization convention (used in HEALPix) is adopted, and it is specified in the "POLCCONV" keyword (see [[Sky_temperature_maps#Polarization_convention_used_in_the_Planck_project|this section]]). The "COMMENT" fields give a one-line summary of the product, and some other information useful for traceability within the DPCs. The original filename is also given in the "FILENAME" keyword. The "BAD_DATA" keyword gives the value used by HEALPix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The main parameters are summarized in the table below.
  
<!---
+
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
{| class="wikitable" align="center" style="text-align:center" border="1" cellpadding="3" cellspacing="0"  width=500px
+
|+ '''Sky map file data structure'''
|+ '''FITS filenames'''
+
|- bgcolor="ffdead"  
|- bgcolor="ffdead"
+
!colspan="4" | 1. EXTNAME = 'FREQ-MAP' : Data columns
! Frequency || Full channel maps
+
|- bgcolor="ffdead" 
 +
! Column name || Data type || Units || Description
 
|-
 
|-
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal.fits|link=LFI_SkyMap_030_1024_R1.10_nominal.fits}}
+
|I_STOKES || Real*4 || K<sub>CMB</sub> or MJy.sr<sup>-1</sup> || Stokes <i>I</i> map
 
|-
 
|-
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal.fits|link=LFI_SkyMap_044_1024_R1.10_nominal.fits}}
+
|Q_STOKES || Real*4 || K<sub>CMB</sub> or MJy.sr<sup>-1</sup> || Stokes <i>Q</i> map (optional)
 +
|-
 +
|U_STOKES || Real*4 || K<sub>CMB</sub> or MJy.sr<sup>-1</sup> || Stokes <i>U</i> map (optional)
 +
|-
 +
|HITS || Int*4 || none || The hit-count map
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal.fits|link=LFI_SkyMap_070_1024_R1.10_nominal.fits}}
+
|II_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> or (MJy.sr<sup>-1</sup>)<sup>2</sup> || <i>II</i> variance map
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal.fits|link=LFI_SkyMap_070_2048_R1.10_nominal.fits}}
+
|IQ_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> or (MJy.sr<sup>-1</sup>)<sup>2</sup> || <i>IQ</i> variance map (optional)
 
|-
 
|-
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal.fits|link=HFI_SkyMap_100_2048_R1.10_nominal.fits}}
+
|IU_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> or (MJy.sr<sup>-1</sup>)<sup>2</sup> || <i>IQ</i> variance map (optional)
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal.fits|link=HFI_SkyMap_143_2048_R1.10_nominal.fits}}
+
|QQ_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> or (MJy.sr<sup>-1</sup>)<sup>2</sup> || <i>QQ</i> variance map (optional)
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal.fits|link=HFI_SkyMap_217_2048_R1.10_nominal.fits}}
+
|QU_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> or (MJy.sr<sup>-1</sup>)<sup>2</sup> || <i>QU</i> variance map (optional)
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal.fits|link=HFI_SkyMap_353_2048_R1.10_nominal.fits}}
+
|UU_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> or (MJy.sr<sup>-1</sup>)<sup>2</sup> || <i>UU</i> variance map (optional)
 
|-
 
|-
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal.fits|link=HFI_SkyMap_545_2048_R1.10_nominal.fits}}
+
|- bgcolor="ffdead" 
 +
! Keyword || Data type || Value || Description
 
|-
 
|-
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal.fits|link=HFI_SkyMap_857_2048_R1.10_nominal.fits}}
+
|PIXTYPE || String || HEALPIX ||
|- bgcolor="ffdead"
 
! Frequency || Full channel, Zodi-corrected maps
 
 
|-
 
|-
| '''100GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits}}
+
|COORDSYS ||  String || GALACTIC ||Coordinate system
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits}}
+
|ORDERING || String || NESTED  || Healpix ordering
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits}}
+
|POLCCONV || String || COSMO  || Polarization convention
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits}}
+
|NSIDE  ||   Int || 1024 or 2048 || HEALPix <i>N</i><sub>side</sub>
 
|-
 
|-
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits}}
+
|FIRSTPIX ||   Int*4 ||                 0 || First pixel number
 
|-
 
|-
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits}}
+
|LASTPIX ||   Int*4 || 12 <i>N</i><sub>side</sub><sup>2</sup> – 1 || Last pixel number
|- bgcolor="ffdead"
 
! Frequency ||  Combined frequency maps
 
 
|-
 
|-
| '''All''' || {{PLASingleFile|fileType=file|name=COM_MapSet_I-allFreqs_R1.10_nominal.fits|link=COM_MapSet_I-allFreqs_R1.10_nominal.fits}}
+
|FREQ ||     String ||                 nnn || Frequency channel 
 
|}
 
|}
  
  
{| class="wikitablealign="center" style="text-align:center" border="1" cellpadding="3" cellspacing="0" width=850px
+
The same structure applies to all "SkyMap" products, independent of whether they are full channel, survey of half-ring. The distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).
|+ '''FITS filenames'''
+
 
|- bgcolor="ffdead"
+
==Polarization convention used in the Planck project==
! Frequency ||  Survey 1 maps || Survey 2 maps
+
 
|-
+
The FITS keyword "POLCCONV" defines the polarization convention of the data within the file.
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_1.fits|link=LFI_SkyMap_030_1024_R1.10_survey_1.fits}} ||
+
The Planck collaboration used the COSMO convention for the polarization angle (as usually adopted in space-based and other CMB missions), whereas other subfields of astronomy usually adopt the IAU convention. The basic difference comes down to whether one thinks of the light rays being emitted from the origin (the usual mathematics/physics convention) or converging on the observer from the sky (the usual astronomy convention), and hence the "obvious" choice is different for a physicists and for an astronomer.  Given that CMB results are of interest to a wide range of both physicists and astronomers, there is no single choice of convention that everyone would regard as self-evident.  Hence one simply has to be aware of the convention being adopted.  Because of this the Planck Collaboration has taken pains to point out which convention is being used in publications and in data releases.  In the following we describe the difference between these two conventions, and the consequence if it is <i>not</i> taken into account correctly in the analysis.
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_2.fits|link=LFI_SkyMap_030_1024_R1.10_survey_2.fits}}
+
 
|-
+
[[File:conventions.png|thumb|center|400px|'''Figure 1. Polarization conventions, showing the COSMO convention (left) and IAU convention (right). The vector <math>\hat{z}</math> points in the outward direction in COSMO, and inwards in IAU. The bottom panel refers to the plane tangent to the sphere.''']]
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_1.fits|link=LFI_SkyMap_044_1024_R1.10_survey_1.fits}} ||
+
 
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_2.fits|link=LFI_SkyMap_044_1024_R1.10_survey_2.fits}}
+
Changing the orientation convention is equivalent to a transformation &psi;'=&pi;-&psi; of the polarization angle (Figure 1). The consequence of this transformation is the inversion of the Stokes parameter <i>U</i>.
|-
+
The components of the polarization tensor in the helicity basis <math>\epsilon^{\pm}=(\hat{x}\pm i\hat{y})/\sqrt{2}</math> are
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_1.fits|link=LFI_SkyMap_070_1024_R1.10_survey_1.fits}} ||
+
 
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_2.fits|link=LFI_SkyMap_070_1024_R1.10_survey_2.fits}}
+
<math>
 +
  (Q+iU)(\hat{n}) = \sum _{\ell m}a_{2,lm}{}_{2}Y_{\ell }^{m}(\hat{n}),
 +
  \\(Q-iU)(\hat{n}) = \sum _{\ell m}a_{-2,lm}{}_{2}Y_{\ell }^{m}(\hat{n}),
 +
</math>
 +
 
 +
where  <math>{}_{2}Y_{\ell }^{m}(\hat{n})</math> are the spin-weighted spherical harmonic functions.
 +
The <i>E</i> and <i>B</i> modes can be defined as
 +
 
 +
<math>
 +
  E(\hat{n}) = \sum_{\ell m}a_{E,\ell m}Y_{\ell }^{m}(\hat{n}),
 +
  \\B(\hat{n}) = \sum_{\ell m}a_{B,\ell m}Y_{\ell }^{m}(\hat{n}),
 +
</math>
 +
 
 +
where the coefficients <i>a<sub>E,&#8467;m</sub></i> and <i>a<sub>B,&#8467;m</sub></i> are derived from linear combinations of the <i>a<sub>2,&#8467;m</sub></i>, <i>a<sub>-2,&#8467;m</sub></i>, defined implicitly in the first equation (<i>Q</i>&plusmn; i<i>U</i>).
 +
 
 +
[[File:test_gradient.jpg|thumb|center|400px|]]
 +
[[File:test_curl.jpg|thumb|center|400px|'''Figure 2. Error on Planck-LFI 70 GHz <i>EE</i> (top) and <i>BB</i> (bottom) power spectra, in the case of an incorrect choice being made for the polarization coordinate system convention (IAU instead of COSMO).''']]
 +
 
 +
The effect of the sign inversion of <i>U</i> on the polarization spectra is a non-trivial mixing of <i>E</i> and <i>B</i> modes.
 +
An example of the typical error on <i>EE</i> and <i>BB</i> auto-spectra in the case of the wrong choice for the polarization basis is shown in Figure 2.
 +
 
 +
<i>One should be careful</i> to be aware of the polarization convention that is being adopted. If the IAU convention is used in computing the power spectra, then the sign of the <i>U</i> component of the Planck maps must be inverted before computing the <i>E</i> and <i>B</i> modes.
 +
 
 +
In astronomical applications it is common to define a pseudo-vector <i>P</i> to show the amplitude and orientation of
 +
polarization on a map. When plotting these line segments to show the orientation of the plane of polarization (or the orthogonal direction, often considered to be the projection of the magnetic field), the results are the same for both the COSMO and IAU conventions. This because the appearance of <i>P</i> is a property of the radiation and hence not affected by the sign of <i>U</i>.
 +
 
 +
=== Note on the convention used in the Planck Catalogue of Compact Sources (PCCS) ===
 +
Planck non-cosmology papers sometimes follow the IAU convention for internal analysis, for ease of comparison with other studies (e.g., comparison of Planck-derived thermal dust emission polarization with the optical polarization of starlight). Nevertheless, Planck data products, such as component-separated maps, still use the COSMO convention.  The one exception is for the compact source catalogue.  Because catalogues of astronomical objects found by Planck need to be compared directly with other source catalogues, the polarized sources described in the Planck Catalogue of Compact Sources follow the IAU convention, and the polarization angles are defined on an interval of [-90&deg;,90&deg;]. To switch to the COSMO convention, the polarization angles listed in the catalogue should be shifted by 90&deg; and multiplied by -1.
 +
 
 +
== References ==
 +
<References />
 +
 
 +
 
 +
<span style="background:green">
 +
 
 +
<span style="background:green">
 +
== Other releases: 2020-NPIPE, 2015 and 2013 ==
 +
 
 +
<div class="toccolours mw-collapsible mw-collapsed" style="background-color: #9ef542;width:80%">
 +
'''2020 - NPIPE'''
 +
<div class="mw-collapsible-content">
 +
The NPIPE flight data maps include several subsets and differ from earlier Planck releases.
 +
 
 +
'''Frequency maps'''
 +
 
 +
All NPIPE maps, even at 545 and 857GHz, are calibrated into CMB kelvins. The temperature maps include the solar system dipole. The monopole of the maps is arbitrary. Only the seasonally-varying part of zodiacal light is removed.
 +
 
 +
Properties of the frequency maps are indicated in the following table:
 +
 
 +
{| class="wikitable"
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_1.fits|link=LFI_SkyMap_070_2048_R1.10_survey_1.fits}} ||
+
! Nominal frequency [GHz] !! Eff. freq. [GHz] in T, alpha=-1<sup>a</sup> !! Eff. freq. [GHz] in P, alpha=-1<sup>b</sup> !! Eff. freq. [GHz] in T, alpha=4<sup>c</sup> !! Eff. freq. [GHz] in P, alpha=4 !! Approx. resolution [arc min]<sup>d</sup> !! Average T noise [uK-arcmin]<sup>e</sup> !! Average P noise [uK-arcmin]<sup>f</sup> !! Calibration uncertainty [%]<sup>g</sup>
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_2.fits|link=LFI_SkyMap_070_2048_R1.10_survey_2.fits}}
 
 
|-
 
|-
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1.fits}} ||
+
| 30 || 28.27 ± 0.03 || same as T || 29.22 ± 0.04 || same as T || 31.5 || 179 || 354 || 0.045
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2.fits}}
 
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1.fits}} ||
+
| 44 || 43.94 ± 0.04 || same as T || 44.69 ± 0.03 || same as T || 27.1 || 203 || 425 || 0.040
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2.fits}}
 
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1.fits}} ||
+
| 70 || 69.97 ± 0.04 || same as T || 72.16 ± 0.03 || same as T || 12.8 || 182 || 363 || 0.030
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2.fits}}
 
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1.fits}} ||
+
| 100 || 100.32 ± 0.09 || 100.31 ± 0.09|| 106.01 ± 0.06 || 106.01 ± 0.06 || 9.47 || 81.3 || 173 || 0.023
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2.fits}}
 
 
|-
 
|-
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1.fits}} ||
+
| 143 || 141.41 ± 0.02 || 140.75 ± 0.02 || 149.30 ± 0.01 || 148.91 ± 0.02 || 7.15 || 32.2 || 93.7 || 0.018
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2.fits}}
 
|-
 
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2.fits}}
 
|- bgcolor="ffdead"
 
! Frequency ||  Survey 1 Zodi-corrected maps || Survey 2 Zodi-corrected maps
 
|-
 
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| 217 || 220.157 ± 0.005 || 219.222 ± 0.006 || 230.685 ± 0.005 || 230.060 ± 0.006 || 4.84 || 52.6 || 136 || 0.024
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| 353 || 358.291 ± 0.005 || 357.432 ± 0.005 || 372.702 ± 0.005 || 371.774 ± 0.005 || 4.76 || 283 || 556 || 0.053
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| 545 || 552.155 ± 0.006 || n/a || 576.660 ± 0.004 || n/a || 4.62 || 4680 || n/a || 0.571
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
 
|-
 
|-
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| 857 || 854.288 ± 0.006  || n/a || 891.617  ± 0.006|| n/a ||  4.23 || 388000 || n/a || 5
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits}}
+
|}
 +
 
 +
<sup>a</sup> Effective central frequency for a synchrotron-like emission.  LFI uncertainties are based on a flat 30% uncertainty in each bandpass bin. HFI uncertainties use estimated statistical uncertainties in each bin.
 +
 
 +
<sup>b</sup> Polarized central frequency differs from temperature for HFI because of the non-ideal polarization sensitivity.
 +
 
 +
<sup>c</sup> Effective central frequency for a thermal dust-like emission.
 +
 
 +
<sup>d</sup> Approximate resolution is measured by fitting a Gaussian beam model to the QuickPol beam window function for intensity.
 +
 
 +
<sup>e</sup> Average noise depth is measured as the standard deviation of the simulated residual maps and includes statistical and systematic elements. Planck noise is not uniformly distributed: this value overestimates the depth near the Ecliptic poles and underestimates the depth at the Ecliptic equator. The noise is also scale-dependent, causing the depth to change in a non-trivial manner when downgrading or smoothing the maps.
 +
 
 +
<sup>f</sup> Polarized noise depth is the length of the [''Q, U''] error vector, not the individual ''Q'' or ''U'' uncertainty.
 +
 
 +
<sup>g</sup> Overall calibration uncertainty as reported in Table 7 of [https://www.aanda.org/articles/aa/abs/2020/11/aa38073-20/aa38073-20.html A&A 643, A42 (2020)].  857GHz calibration uncertainty continues to be dominated by a 5% planetary emission model uncertainty.
 +
 
 +
All effective frequencies are based on integrals of the ground-measured detector bandpasses and noise weights as they are recorded in the accompanying [[NPIPE RIMO|instrument model]].  Inverse variance noise weights in each horn are symmetrized:
 +
 
 +
[[File:Symmetrized weight.png|300px|frameless|center|Symmetrized noise weights]]
 +
 
 +
'''Half-ring maps'''
 +
 
 +
Half-ring frequency maps can be used to gauge instrumental noise.  The large-scale systematics residuals in this split are fully correlated and cancel in the difference.  The half-ring split data were destriped independently with Madam to avoid correlated noise residuals.
 +
 
 +
'''Single-detector maps'''
 +
 
 +
We provide de-polarized single-detector maps for all polarized Planck frequencies.  545 and 857GHz single-detector maps are not actively corrected for polarization modulation, but the small level of unintentional polarization sensitivity in the detectors is suppressed using the destriping templates.  Single-detector maps are not corrected for bandpass mismatch. 217-857GHz single-detector maps are binned at <i>N</i><sub>side</sub>=4096 to better sample the narrow beam.  1/<i>f</i> noise in the detector maps is suppressed by destriping the single detector TOD with the Madam destriper code.  As a result, 1/<i>f</i> noise residuals are not correlated between the maps.  Large-scale calibration is based on full frequency data and the associated errors are correlated.
 +
 
 +
<!--
 +
'''Single-horn maps'''
 +
 
 +
De-polarizing single-detector data requires sampling a smoothed full-frequency polarization map to produce a polarization signal estimate.  This estimate includes errors and noise that subsequently get injected into the single-detector maps.  Those errors can be cancelled by co-adding polarization-orthogonal detectors in each Planck feedhorn.  For optimal cancellation, the co-add weights must account for difference in polarization sensitivity between the detectors.  Single-horn maps are provided for all Planck horns.
 +
-->
 +
'''A/B split maps'''
 +
 
 +
Earlier Planck releases included various data splits with different degrees of correlated systematics.  Any time-domain split is vulnerable to detector mismatch (beam, bandpass, etc.) that is stable over time. Full-frequency gain and bandpass-mismatch corrections used in PR3 also introduced correlated errors in the split maps that were provided. NPIPE release includes one, maximally-independent split.
 +
 
 +
<!---
 +
[[File:Subsets.png|600px|framess|none|NPIPE data splits]]
 +
--->
 +
 
 +
For frequencies with enough redundancy, the split is based on feedhorns.  Since the Planck scan strategy does not allow polarized mapmaking with fewer than two non-redundant feedhorns, the 30 and 44 GHz data could not be split by horns.  Instead, these frequency channels are split in time.  A half-mission split would produce incomplete sky coverage for the second half of LFI, so we use alternating years instead. Since the NPIPE A/B split is not purely time or detector set, the maps in the PLA are assigned different identifiers, as summarized below.
 +
 
 +
{| class="wikitable"
 
|-
 
|-
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
! Frequency [GHz] !! Subset A !! Subset B
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|- bgcolor="ffdead"
 
! Frequency ||  Half-ring 1 maps ||Half-ring 2 maps
 
 
|-
 
|-
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits}} ||
+
| 30 || Years 1, 3 || Years 2, 4
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits}} ||
+
| 44 || Years 1, 3 || Years 2, 4
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits}} ||
+
| 70 || Feedhorns 18, 20, 23 || Feedhorns 19, 21, 22
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| 100 || Feedhorns 1, 4 (ds1) || Feedhorns 2, 3 (ds2)
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| 143 || Feedhorns 1, 3, 5, 7 (ds3)|| Feedhorns 2, 4, 6 (ds4)
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| 217 || Feedhorns 1, 3, 5, 7 (ds3)|| Feedhorns 2, 4, 6, 8 (ds4)
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''217GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| 353 || Feedhorns 1, 3, 5, 7 (ds3)|| Feedhorns 2, 4, 6, 8 (ds4)
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| 545 || Feedhorn 1 (ds2) || Feedhorns 2, 4 (ds3)
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| 857 || Feedhorns 1, 3 (ds3)|| Feedhorns 2, 4 (ds4)
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|}
 
|}
--->
 
  
== FITS file structure ==
+
The locations of the feedhorns are indicated in the following Figure.
  
The FITS files for the sky maps contain a minimal primary header with no data, and a ''BINTABLE'' extension (EXTENSION 1, EXTNAME = ''FREQ-MAP'') containing the data.  The structure is shows schematically in the figure below.  The ''FREQ-MAP'' extension contains a 3- or a 10-column table that contain the signal, hit-count and variance maps, all in Healpix format.  The 3-column case is for intensity only maps, the 10-column case is for polarisation. The number of rows is the number of map pixels, which is Npix = 12 <math>N_{side}</math><sup>2</sup> for Healpix maps, where <math>N_{side}</math> = 1024 or 2048 for most the maps presented in this chapter.
+
[[File:FocalPlane.png|600px|framess|Planck feedhorn positions|Planck feedhorn positions]]
  
[[File:FITS_FreqMap.png | 550px  | center | thumb | '''FITS file structure''']]
+
Physical properties of the frequency maps are indicated in the following table:
  
Note that file sizes are ~0.6 GB for I-only maps and ~1.9 GB for I,Q,U maps at <math>N_{side}</math> 2048 and ~0.14 GB for I-only maps and ~0.45 GB for I,Q,U maps at <math>N_{side}</math> 1024 .
+
{| class="wikitable"
 
+
|-
Keywords indicate the coordinate system (GALACTIC), the Healpix ordering scheme (NESTED), the units (K_cmb or MJy/sr) of each column, and of course the frequency channel (FREQ). Where polarisation Q and U maps are provided, the ''COSMO'' polarisation convention (used in HEALPIX) is adopted, and it is specified in the ''POLCCONV'' keyword (see [[Sky_temperature_maps#Polarization_convention_used_in_the_Planck_project|this section]]. The COMMENT fields give a one-line summary of the product, and some other information useful for traceability within the DPCs. The original filename is also given in the ''FILENAME'' keyword. The ''BAD_DATA'' keyword gives the value used by Healpix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The main parameters are summarised below:
+
! Nominal frequency [GHz] !! Eff. freq. [GHz] in T, alpha=-1<sup>a</sup> !! Eff. freq. [GHz] in P, alpha=-1<sup>b</sup> !! Eff. freq. [GHz] in T, alpha=4<sup>c</sup> !! Eff. freq. [GHz] in P, alpha=4 !! Approx. resolution [arc min]<sup>d</sup> !! Average T noise [uK-arcmin]<sup>e</sup> !! Average P noise [uK-arcmin]<sup>f</sup> !! Calibration uncertainty [%]<sup>g</sup>
 
+
|-
 
+
| 30A || 28.27 ± 0.03 || same as T || 29.22 ± 0.04 || same as T || 31.5 || 256 || 511 || 0.064
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
+
|-
|+ '''Sky map file data structure'''
+
| 30B || 28.27 ± 0.03 || same as T || 29.22 ± 0.04 || same as T || 31.5 || 255 || 510 || 0.064
|- bgcolor="ffdead" 
 
!colspan="4" | 1. EXTNAME = 'FREQ-MAP' : Data columns
 
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
 
|-
 
|-
|I_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes I map
+
| 44A || 43.94 ± 0.04 || same as T || 44.69 ± 0.03 || same as T || 27.1 || 292 || 611 || 0.057
 
|-
 
|-
|Q_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes Q map (optional)
+
| 44B || 43.94 ± 0.04 || same as T || 44.69 ± 0.03 || same as T || 27.1 || 290 || 610 || 0.057
 
|-
 
|-
|U_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes U map (optional)
+
| 70A || 70.09 ± 0.05 || same as T || 72.23 ± 0.05 || same as T || 13.0 || 259 || 540 || 0.043
 
|-
 
|-
|HITS || Int*4 || none || The hit-count map
+
| 70B || 69.86 ± 0.05 || same as T || 72.10 ± 0.05 || same as T || 12.7 || 256 || 545 || 0.042
 
|-
 
|-
|II_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The II variance map
+
| 100A || 100.41 ± 0.12 || 100.40 ± 0.12 || 106.16 ± 0.09 || 106.15 ± 0.09 || 9.50 || 137 || 294 || 0.039
 
|-
 
|-
|IQ_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The IQ variance map (optional)
+
| 100B || 100.27 ± 0.61 || 100.27 ± 0.61 || 105.92 ± 0.67 || 105.91 ± 0.68 || 9.44 || 97.0 || 202 || 0.027
 
|-
 
|-
|IU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The IQ variance map (optional)
+
| 143A || 141.65 ± 0.02 || 140.44 ± 0.02 || 149.56 ± 0.02 || 148.62 ± 0.02 || 7.17 || 42.8 || 140 || 0.024
 
|-
 
|-
|QQ_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The QQ variance map (optional)
+
| 143B || 141.14 ± 0.02 || 140.99 ± 0.02 || 149.12 ± 0.02 || 149.03 ± 0.02 || 7.13 || 48.6 || 127 || 0.027
 
|-
 
|-
|QU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The QU variance map (optional)
+
| 217A || 220.248 ± 0.006 || 219.284 ± 0.008 || 230.848 ± 0.006 || 230.278 ± 0.008 || 4.83 || 73.2 || 186 || 0.033
 
|-
 
|-
|UU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The UU variance map (optional)
+
| 217B || 220.064 ± 0.006 || 219.160 ± 0.008 || 230.523 ± 0.006 || 229.850 ± 0.007 || 4.84 || 76.0 || 200 || 0.035
 
|-
 
|-
|- bgcolor="ffdead" 
+
| 353A || 357.571 ± 0.006 || 356.622 ± 0.007 || 371.950 ± 0.006 || 371.320 ± 0.006 || 4.75 || 322 || 751 || 0.060
! Keyword || Data Type || Value || Description
 
 
|-
 
|-
|PIXTYPE || string || HEALPIX ||
+
| 353B || 359.141 ± 0.006 || 358.517 ± 0.006 || 373.572 ± 0.007 || 372.357 ± 0.006 || 4.78 || 321 || 869 || 0.060
 
|-
 
|-
|COORDSYS ||  string || GALACTIC ||Coordinate system
+
| 545A || 554.398 ± 0.013 || n/a || 579.132 ± 0.004 || n/a ||  4.75 || 5562 || n/a || 0.679
 
|-
 
|-
|ORDERING || string || NESTED || Healpix ordering
+
| 545B || 551.162 ± 0.008 || n/a || 575.531 ± 0.005 || n/a ||  4.56 || 4706 || n/a || 0.574
 
|-
 
|-
|POLCCONV || String || COSMO  || Polarization convention
+
| 857A || 857.886 ± 0.025  || n/a || 894.914  ± 0.032 || n/a ||  4.22 || 394000 || n/a || 5
 
|-
 
|-
|NSIDE  ||   Int || 1024 or 2048 || Healpix <math>N_{side}</math>
+
| 857B || 850.364 ± 0.008  || n/a || 887.862  ± 0.009 || n/a || 4.25 || 417000 || n/a || 5
|-
+
|}
|FIRSTPIX ||  Int*4 ||                  0 || First pixel number
 
|-
 
|LASTPIX ||   Int*4 || 12 <math>N_{side}</math><sup>2</sup> – 1 || Last pixel number
 
|-
 
|FREQ ||    string ||                 nnn || The frequency channel 
 
|}
 
  
 +
<sup>a</sup> Effective central frequency for a synchrotron-like emission.  LFI uncertainties are based on a flat 30% uncertainty in each bandpass bin. HFI uncertainties use estimated statistical uncertainties in each bin.
  
The same structure applies to all ''SkyMap'' products, independent of whether they are full channel, survey of half-ring.  The distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).
+
<sup>b</sup> Polarized central frequency differs from temperature for HFI because of the non-ideal polarization sensitivity.
  
==Polarization convention used in the Planck project==
+
<sup>c</sup> Effective central frequency for a thermal dust-like emission.
  
The Planck collaboration used the COSMO convention for the polarization angle (as usually used in space based CMB missions), whereas other astronomical fields usually use the IAU convention. In the following document we report the difference between these two conventions, and the consequence if it is NOT taken into account correctly in the analysis.
+
<sup>d</sup> Approximate resolution is measured by fitting a Gaussian beam model to the QuickPol beam window function for intensity.
  
[[File:conventions.png|thumb|center|400px|'''Figure 1. COSMO convention (left) and IAU convention (right). The versor <math>\hat{z}</math> points outwards the pointing direction in COSMO, and inwards in IAU. The bottom panel refers to the plane tangent to the sphere.''']]
+
<sup>e</sup> Average noise depth is measured as the standard deviation of the simulated residual maps and includes statistical and systematic elements. Planck noise is not uniformly distributed: this value overestimates the depth near the Ecliptic poles and underestimates the depth at the Ecliptic equator. The noise is also scale-dependent, causing the depth to change in a non-trivial manner when downgrading or smoothing the maps.
  
Changing the orientation convention is equivalent to a transformation <math>\psi'=\pi-\psi</math> of the polarization angle (Figure 1). The consequence of this transformation is the inversion of the Stokes parameter <math>U</math>.
+
<sup>f</sup> Polarized noise depth is the length of the [''Q, U''] error vector, not the individual ''Q'' or ''U'' uncertainty.
The components of the polarization tensor in the helicity basis <math>\epsilon^{\pm}=1/\sqrt{2}(\hat{x}\pm i\hat{y})</math> are:
 
  
<math>
+
<sup>g</sup> Overall calibration uncertainty is based on the full frequency results in Table 7 of [https://www.aanda.org/articles/aa/abs/2020/11/aa38073-20/aa38073-20.html A&A 643, A42 (2020)] and scaled to the subset map noise depth.  857GHz calibration uncertainty continues to be dominated by a 5% planetary emission model uncertainty.
  (Q+iU)(\hat{n}) = \sum _{\ell m}a_{2,lm}{}_{2}Y_{\ell }^{m}(\hat{n})
 
  \\(Q-iU)(\hat{n}) = \sum _{\ell m}a_{-2,lm}{}_{2}Y_{\ell }^{m}(\hat{n})
 
</math>
 
  
where  <math>{}_{2}Y_{\ell }^{m}(\hat{n})</math> are the spin weighted spherical harmonic functions.
+
'''File names'''
The <math>E</math> and <math>B</math> modes can be defined as:
 
<math>
 
  E(\hat{n}) = \sum_{\ell m}a_{E,\ell m}Y_{\ell }^{m}(\hat{n})
 
  \\B(\hat{n}) = \sum_{\ell m}a_{B,\ell m}Y_{\ell }^{m}(\hat{n})
 
</math>
 
  
where the coefficients <math>a_{E,\ell m}</math> and <math>a_{B,\ell m}</math> are derived from linear combinations of the <math>a_{2,\ell m}</math> , <math>a_{-2,\ell m}</math> defined implicitly in the first equation (<math>Q\pm iU</math>).
+
The FITS filenames are of the form ''{H|L}FI_SkyMap_fff{-tag}_Nside_R4.nn_{coverage}-{type}.fits'', where "fff" are three digits to indicate the Planck frequency band, "tag" indicates the single detector or the detset (no "tag" indicates full channel),  "Nside" is the HEALPix <i>N</i><sub>side</sub> value of the map, "coverage" indicates which part of the mission is covered (full, half-mission, survey, year, etc.), and the optional "type" indicates the subset of input data used.  The table below lists the products by type, with the appropriate unix wildcards that form the full filename.
  
[[File:test_gradient.jpg|thumb|center|400px|]]
+
{| class="wikitable"  align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=880px
[[File:test_curl.jpg|thumb|center|400px|'''Figure 2. Error on Planck-LFI 70 GHz <math>EE</math> (top) and <math>BB</math> (bottom) spectra, in case of wrong choice of the coordinate system convention (IAU instead of COSMO).''']]
+
|+ '''Frequency map FITS filenames'''
 +
|- bgcolor="ffdead"
 +
! Coverage  ||  Filename
 +
|-
 +
| Full-channel, full-mission || ?FI_SkyMap_fff{-tag}_????_R4.??_full.fits
 +
|-
 +
| Full-channel, full-mission, half-ring || ?FI_SkyMap_fff{-tag}_????_R4.??_full-ringhalf-{1|2}.fits
 +
|-
 +
| Subset A maps, 30 and 44GHz || ?FI_SkyMap_fff_1024_R4.??_year-1-3.fits
 +
|-
 +
| Subset B maps, 30 and 44GHz || ?FI_SkyMap_fff_1024_R4.??_year-2-4.fits
 +
|-
 +
| Subset A maps, 70GHz || LFI_SkyMap_070-18-20-23_1024_R4.??_full.fits
 +
|-
 +
| Subset B maps, 70GHz || LFI_SkyMap_070-19-21-22_1024_R4.??_full.fits
 +
|-
 +
| Subset A maps, 100GHz || HFI_SkyMap_100-ds1_2048_R4.??_full.fits
 +
|-
 +
| Subset B maps, 100GHz || HFI_SkyMap_100-ds2_2048_R4.??_full.fits
 +
|-
 +
| Subset A maps, 143GHz || HFI_SkyMap_143-ds3_2048_R4.??_full.fits
 +
|-
 +
| Subset B maps, 143GHz || HFI_SkyMap_143-ds4_2048_R4.??_full.fits
 +
|-
 +
| Subset A maps, 217GHz || HFI_SkyMap_217-ds3_2048_R4.??_full.fits
 +
|-
 +
| Subset B maps, 217GHz || HFI_SkyMap_217-ds4_2048_R4.??_full.fits
 +
|-
 +
| Subset A maps, 353GHz || HFI_SkyMap_353-ds3_2048_R4.??_full.fits
 +
|-
 +
| Subset B maps, 353GHz || HFI_SkyMap_353-ds4_????_R4.??_full.fits
 +
|-
 +
| Subset A maps, 545GHz || HFI_SkyMap_545-ds2_????_R4.??_full.fits
 +
|-
 +
| Subset B maps, 545GHz || HFI_SkyMap_545-ds3_????_R4.??_full.fits
 +
|-
 +
| Subset A maps, 857GHz || HFI_SkyMap_857-ds3_????_R4.??_full.fits
 +
|-
 +
| Subset B maps, 857GHz || HFI_SkyMap_857-ds4_????_R4.??_full.fits
 +
|-
 +
| Single-detector maps || ?FI_SkyMap_{detector}_????_R4.??_full.fits
 +
|-
 +
|}
  
The effect of the sign inversion of <math>U</math> on the polarization spectra is a non trivial mixing of <math>E</math> and <math>B</math> modes.
 
  
An example of the typical error on <math>EE</math> and <math>BB</math> auto-spectra in case of a wrong choice of the polarization basis is shown in Figure 2.
+
'''FITS file structure'''
  
BE CAREFUL about the polarization convention you are using. If the IAU convention is used in computing the power spectra, the sign of the <math>U</math> component of the Planck maps must be inverted before computing <math>E</math> and <math>B</math> modes.
+
The FITS files for the sky maps contain a minimal primary header with no data, and a ''BINTABLE'' extension (EXTENSION 1, EXTNAME = ''FREQ-MAP'') containing the data.   The structure is shown schematically in the figure below.  The ''FREQ-MAP'' extension contains a 3- or 10-column table that includes the signal, hit-count, and variance maps, all in HEALPix format.  The 3-column case is for intensity-only maps, while the 10-column case is for polarization. The number of rows is the number of map pixels, which is <i>N</i><sub>pix</sub> = 12 <i>N</i><sub>side</sub><sup>2</sup> for HEALPix maps, where <i>N</i><sub>side</sub> = 1024 or 2048 for most of the maps presented in this section.
  
=== Note on the convention used by the Planck Catalogue of Compact Sources (PCCS) ===
+
[[File:FITS_FreqMap.png | 550px  | center | thumb | '''FITS file structure.''']]
For continuity with other compact sources catolgues, the Catalogue of Compact Sources provided by Planck follows the IAU convention, and the polarization angles are defined on an interval of [-90&deg;,90&deg;]. To switch to the COSMO convention, the polarization angles listed in the catalogue have to be shifted by 90&deg; and multiplied by -1.
 
  
== References ==
+
Note that file sizes are approximately 0.6 GB for <i>I</i>-only maps and 1.9 GB for <i>IQU</i> maps at <i>N</i><sub>side</sub>=2048, but about 0.14 GB for <i>I</i>-only maps and 0.45 GB for <i>IQU</i> maps at <i>N</i><sub>pix</sub>=1024 .
<References />
 
  
 +
Keywords indicate the coordinate system ("GALACTIC"), the HEALPix ordering scheme ("NESTED"), the units (K<sub>CMB</sub> of each column, and of course the frequency channel ("FREQ"). Where polarization <i>Q</i> and <i>U</i> maps are provided, the "COSMO" polarization convention (used in HEALPix) is adopted, and it is specified in the "POLCCONV" keyword. The original filename is also given in the "FILENAME" keyword. The "BAD_DATA" keyword gives the value used by HEALPix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The main parameters are summarized in the table below.
  
<span style="background:green">
+
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 
+
|+ '''Sky map file data structure'''
<span style="background:green">
+
|- bgcolor="ffdead" 
== Previous releases ==
+
!colspan="4" | 1. EXTNAME = 'FREQ-MAP' : Data columns
 
+
|- bgcolor="ffdead" 
<div class="toccolours mw-collapsible mw-collapsed" style="background-color: #FFDAB9;width:80%" >
+
! Column name || Data type || Units || Description
'''2015 Sky temperature and polarization maps'''
+
|-
 
+
|I_STOKES || Real*4 || K<sub>CMB</sub> || Stokes <i>I</i> map
<div class="mw-collapsible-content">
+
|-
 
+
|Q_STOKES || Real*4 || K<sub>CMB</sub> || Stokes <i>Q</i> map (optional)
 
+
|-
'''General description'''
+
|U_STOKES || Real*4 || K<sub>CMB</sub> || Stokes <i>U</i> map (optional)
 
+
|-
Sky maps give the best estimate of the intensity and polarization (Stokes Q and U components), if available, of the signal from the sky after removal, as far as possible, of known systematic effects (mostly instrumental, but including also the solar and earth-motion dipole, Galactic strylight and the Zodiacal light).  Sky maps are provided for the full Planck mission using all valid detectors in each frequency channel, and also for various subsets by splitting the mission in various time ranges or in subsets of the detectors in a given channel.  These products are useful for the study of source variability, but they are especially interesting for characterisation purposes (see also the [[HFI-Validation | data validation]] section).  The details of the start and end of the time ranges are given in the table below.
+
|HITS || Int*4 || none || The hit-count map
 
+
|-
To help in further processing, there are also masks of the Galactic Plane and of point sources, each provided for several different depths.
+
|II_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> || <i>II</i> variance map
 
 
All sky maps are in Healpix format, with Nside of 1024 (LFI 30, 44 and 70) and 2048 (LFI 70 and HFI), in Galactic coordinates, and Nested ordering.
 
 
 
;WARNING: the Healpix convention for polarization is NOT the same as the IAU convention - see Section 8 in this page.
 
 
 
The signal is given in units of K<sub>cmb</sub> for 30-353 GHz, and of MJy/sr (for a constant <math>\nu F_\nu</math> energy distribution ) for 545 and 857 GHz.  For each frequency channel, the intensity and polarization maps are packaged into a ''BINTABLE'' extension of a FITS file together with a hit-count map (or hit map, for short, giving the number of observation samples that are cumulated in a pixel, all detectors combined) and with the variance and covariance maps. Additional information is given in the FITS file header.  The structure of the FITS file is given in the [[#FITS_file_structure | FITS file structure]] section below.
 
 
 
; R2.00 : this first release (Jan 2015) contains polarisation data for the 353 GHz channel only.
 
; R2.01 : this second release (May 2015) adds polarisation data to the 100-217 GHz channels.
 
; R2.02 : a full re-release to correct the Healpix bad pixel value in the maps which was altered during the preparation of the maps and not reset to the correct value (the valid pixels are unchanged). It also fixes some FITS keywords, and includes a full re-release of the Zodi correction maps, with the 100-217 GHz one now including the polarisation correction)
 
 
 
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 
|+ '''Ranges for mission and surveys'''
 
|- bgcolor="ffdead" 
 
! Range || ODs || HFI rings || pointing-IDs || Comment
 
 
|-
 
|-
|nominal mission || 91 - 563 || 240 - 14723 || 00004200 - 03180200 ||
+
|IQ_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> || <i>IQ</i> variance map (optional)
 
|-
 
|-
|full mission || 91 - 974 || 240 - 27005 || 00004200 - 05322620 || for HFI
+
|IU_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> || <i>IQ</i> variance map (optional)
 
|-
 
|-
|full mission || 91 - 1543 || n/a || 00004200 - 06511160 || for LFI
+
|QQ_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> || <i>QQ</i> variance map (optional)
 
|-
 
|-
|Survey 1 || 91 - 270 || 240 - 5720 || 00004200 - 01059820 ||
+
|QU_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> || <i>QU</i> variance map (optional)
 
|-
 
|-
|Survey 2 || 270 - 456 || 5721 - 11194 || 01059830 - 02114520 ||
+
|UU_COV || Real*4 || K<sub>CMB</sub><sup>2</sup> || <i>UU</i> variance map (optional)
 
|-
 
|-
|Survey 3 || 456 - 636 || 11195 - 16691 || 02114530 - 03193660 ||
+
|- bgcolor="ffdead" 
 +
! Keyword || Data type || Value || Description
 
|-
 
|-
|Survey 4 || 636 - 807 || 16692 - 21720 || 03193670 - 04243900 ||
+
|PIXTYPE || String || HEALPIX ||
 
|-
 
|-
|Survey 5 || 807 - 974 || 21721 - 27005 || 05267180 - 05322590 || end of mission for HFI
+
|COORDSYS || String || GALACTIC ||Coordinate system
 
|-
 
|-
|Survey 5 || 807 - 993 || n/a || 05267180 - 06344800 || end of survey for LFI
+
|ORDERING || String || NESTED  || Healpix ordering
 
|-
 
|-
|Survey 6 || 993 - 1177 || n/a || 06344810 - 06398120 || LFI only
+
|POLCCONV || String || COSMO  || Polarization convention
 
|-
 
|-
|Survey 7 || 1177 - 1358 || n/a || 06398130 - 06456410 || LFI only
+
|NSIDE  ||   Int || 1024 or 2048 || HEALPix <i>N</i><sub>side</sub>
 
|-
 
|-
|Survey 8 || 1358 - 1543 || n/a || 06456420 - 06511160 || LFI only
+
|FIRSTPIX ||   Int*4 ||                 0 || First pixel number
|-
 
|Survey 9 || 1543 - 1604 || n/a || 06511170 - 06533320 || LFI only Not in this delivery
 
|-
 
|HFI mission-half-1 || 91 - 531 || 240 - 13471 || 00004200 - 03155580 ||
 
|-
 
|HFI mission-half-2 || 531 - 974 || 13472 - 27005 || 03155590 - 05322590 ||
 
|-
 
|LFI Year 1 || 91 - 456 || n/a || 00004200 - 02114520 ||
 
 
|-
 
|-
|LFI Year 2 || 456 - 807 || n/a || 02114530 - 04243900 ||
+
|LASTPIX ||   Int*4 || 12 <i>N</i><sub>side</sub><sup>2</sup> – 1 || Last pixel number
|-
 
|LFI Year 3 || 807 - 1177 || n/a || 05267180 - 06398120 ||
 
|-
 
|LFI Year 4 || 1177 - 1543 || n/a || 06398130 - 06511160 ||
 
 
|-
 
|-
 +
|FREQ ||    String ||                nnn || Frequency channel 
 
|}
 
|}
  
'''Production process'''
 
  
Sky maps are produced by combining appropriately the data of all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarised) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system.  In particular, they include the Zodiacal light emission (Zodi for short) and also the scattering from the far-side lobes of the beams (FSL).  More on this below.
+
The same structure applies to all "SkyMap" products, independent of whether they are full channel, survey of half-ring. The distinction between the types of map is present in the FITS filename (and in the traceability comment fields).
  
''' HFI processing '''
 
  
The mapmaking and calibration process is described in detail in the [[Map-making_LFI | Map-making]] section and in the {{PlanckPapers|planck2014-a09}} paper, where detailed references are found.  In brief it consists of:
+
</div>
 +
</div>
  
; binning the TOI data onto ''rings'' : Healpix rings (HPRs) are used here, each ring containing the combined data of one pointing period.
+
<div class="toccolours mw-collapsible mw-collapsed" style="background-color: #FFDAB9;width:80%" >
; flux calibration : at 100-353 GHz, the flux calibration factors are determined by correlating the signal with the orbital dipole, which is determined very accurately from the Planck satellite orbital parameters provided by Flight Dynamics.  This provides a single gain factor per bolometer.  At 545 and 857 GHz the gain is determined from the observation of Uranus and Neptune (but not Jupiter which is too bright) and comparison to recent models made explicitly for this mission.  A single gain is applied to all rings at these frequencies.
+
'''2015 Sky temperature and polarization maps'''
; destriping : in order to remove low-frequency noise, an offset per ring is determined by minimizing the differences between HPRs at their crossings, and removed.
 
; Zodiacal light correction : a Zodiacal light model is used to build HPRs of the the Zodi emission, which is subtracted from the calibrated HPRs.
 
; projection onto the map : the offset-corrected, flux-calibrated, and Zodi-cleaned HPRs are projected onto Healpix maps, with the data of each bolometer weighted by a factor of 1/NET of that bolometer.
 
  
These steps are followed by some post-processing which is designed to prepare the maps for the component separation work.  This post processing consists of:
+
<div class="mw-collapsible-content">
  
; Dust bandpass leakage correction : the Q and U maps are corrected for the intensity-to-polarisation leakage caused by the foregrounds having a non-CMB spectrum, and as a consequence of the non-identical bandpasses on the different detectors (bandpass mismatch, or BPM). This correction is determined using the ''ground'' method as described in Section 7.3 of {{PlanckPapers|planck2014-a09}}. These correction maps can be found in the Planck Legacy Archive as ''HFI_CorrMap_???-dustleak-ground_2048_R2.0?_{coverage}.fits''. The correction is applied by subtracting the correction map from the corresponding input map.  This correction is not applied to the nominal mission maps in order to maintain compatibility with the PR1 products.
 
; Far Side Lobe calibration correction : the 100-217 maps are multiplied by factors of 1.00087, 1.00046, and 1.00043, respectively, to compensate for the non-removal of the far-side lobes, and similarly the corresponding covariance maps have also been corrected by multiplication by the square of the factor.
 
; Fill missing pixels : missing pixels are filled in with a value that is the mean of valid pixels within a given radius.  A radius of 1 deg is used for the full channel maps, and 1.5 deg is used for the detset maps.  This step is not applied to the single survey maps since they have large swaths of the sky that are not covered.
 
  
; Map zero-level : for the  100 to 857 GHz maps, the zero levels are set to their optimal levels for Galactic and CIB studies.  A procedure for adjusting them to astrophysical values is given in the HFI Mapmaking and Calibration paper {{PlanckPapers|planck2014-a09}}.
+
'''General description'''
  
These maps provide the main mission products.  Together with signal maps, hit count, variance, and variance maps are also produced. The hit maps give the (integer) number of valid TOI-level samples that contribute to the signal of each pixel. All valid samples are counted in the same way, i.e., there is no weighting factor applied.  The variance maps project the white noise estimate, provided by the NETs, in the sky domain.
+
Sky maps give the best estimate of the intensity and polarization (Stokes Q and U components), if available, of the signal from the sky after removal, as far as possible, of known systematic effects (mostly instrumental, but including also the solar and earth-motion dipole, Galactic strylight and the Zodiacal light).  Sky maps are provided for the full Planck mission using all valid detectors in each frequency channel, and also for various subsets by splitting the mission in various time ranges or in subsets of the detectors in a given channel. These products are useful for the study of source variability, but they are especially interesting for characterisation purposes (see also the [[HFI-Validation | data validation]] section).  The details of the start and end of the time ranges are given in the table below.
  
Note that the nominal mission maps have not had the post-processing applied, which makes them more easily comparable to the PR1 products.
+
To help in further processing, there are also masks of the Galactic Plane and of point sources, each provided for several different depths.
  
''' LFI processing '''
+
All sky maps are in Healpix format, with Nside of 1024 (LFI 30, 44 and 70) and 2048 (LFI 70 and HFI), in Galactic coordinates, and Nested ordering.  
LFI maps were constructed with the Madam map-making code, version 3.7.4. The code is based on generalized destriping technique, where the correlated noise component is modeled as a sequence of constant offset, called baselines. A noise filter was used to constrain the baseline solution allowing the use of 0.25 s and 1 second baselines for the 30 and 44, 70 GHz respectively.
 
  
Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The used weights are listed in [[Map-making LFI#Map-making|Map-making]]. The flagged samples were excluded from the analysis by setting their weights to <math>C_{w}^{-1}</math> = 0. The galaxy region was masked out in the destriping phase, to reduce error arising from strong signal gradients. The polarization component was included in the analysis...  
+
;WARNING: the Healpix convention for polarization is NOT the same as the IAU convention - see Section 8 in this page.
  
; Dipole and Far Side Lobe correction : input timelines are cleaned by 4pi convolved dipole and Galactic Straylight obtained as convolution of the 4pi in band far sidelobes and Galactic Simulation as explained in Section 7.4 of {{PlanckPapers|planck2014-a03}}.  
+
The signal is given in units of K<sub>cmb</sub> for 30-353 GHz, and of MJy/sr (for a constant <math>\nu F_\nu</math> energy distribution ) for 545 and 857 GHz.  For each frequency channel, the intensity and polarization maps are packaged into a ''BINTABLE'' extension of a FITS file together with a hit-count map (or hit map, for short, giving the number of observation samples that are cumulated in a pixel, all detectors combined) and with the variance and covariance maps. Additional information is given in the FITS file header. The structure of the FITS file is given in the [[#FITS_file_structure | FITS file structure]] section below.  
  
Beam effects on the LFI maps are described in Section 7.1 of {{PlanckPapers|planck2014-a03}}. Scaling of the maps due to beam effects is taken into account in the LFI's beam functions (as provided in the RIMO, give reference) which should be used for analysis of diffuse components. To compute the flux densities of compact sources, correction must be made for beam effects (see Table 8 of {{PlanckPapers|planck2014-a03}})."
+
; R2.00 : this first release (Jan 2015) contains polarisation data for the 353 GHz channel only.
 +
; R2.01 : this second release (May 2015) adds polarisation data to the 100-217 GHz channels.
 +
; R2.02 : a full re-release to correct the Healpix bad pixel value in the maps which was altered during the preparation of the maps and not reset to the correct value (the valid pixels are unchanged). It also fixes some FITS keywords, and includes a full re-release of the Zodi correction maps, with the 100-217 GHz one now including the polarisation correction)
  
; Bandpass leakage correction : '''as opposed to the HFI, the LFI high resolution maps have not been corrected for bandpass leakage. Only low resolution (nside 256) maps are provided with the bandpass correction'''. The correction maps (LFI_CorrMap_0??-BPassCorr_*.fits) can be found in the Planck Legacy Archive. Further details about the procedure used to generate the bandpass correction maps can be found in Section 11 of {{PlanckPapers|planck2014-a03}}.
+
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 
+
|+ '''Ranges for mission and surveys'''
; Map zero-level : for the 30, 44 and 70 GHz, maps are corrected for zero level monopole by applying an offset correction, see LFI Calibration paper {{PlanckPapers|planck2014-a06}}. Note that the offset applied is indicated in the header as a comment keyword.
+
|- bgcolor="ffdead" 
 
+
! Range || ODs || HFI rings || pointing-IDs || Comment
A detailed description of the map-making procedure is given in {{PlanckPapers|planck2013-p02}}, {{PlanckPapers|planck2014-a03}}, {{PlanckPapers|planck2014-a07}} and in section [[Map-making LFI#Map-making|Map-making]].
+
|-
 
+
|nominal mission || 91 - 563 || 240 - 14723 || 00004200 - 03180200 ||
'''Types of maps '''
+
|-
 
+
|full mission || 91 - 974 || 240 - 27005 || 00004200 - 05322620 || for HFI
''' Full mission, full channel maps (6 HFI, 4 LFI)'''
+
|-
 
+
|full mission || 91 - 1543 || n/a || 00004200 - 06511160 || for LFI
Full channel maps are built using all the valid detectors of a frequency channel and cover the either the full or the nominal mission.  For HFI, the 143-8 and 545-3 bolometers are rejected entirely as they are seriously affected by RTS noise.  HFI provides the Q and U components for the 100, 143, 217 and 353 GHz channels only. LFI provides the I, Q and U maps for all the channels. Reminder: HFI Q and U maps are corrected for bandpass leakage but LFI Q and U maps are not. The I, Q and U maps are displayed in the figures below. The color range is set using a histogram equalisation scheme (from HEALPIX) that is useful for these non-Gaussian data fields. For visualization purposes, the Q and U maps shown here have been smoothed with a 1 degree Gaussian kernel, otherwise they look like noise to the naked eye.
+
|-
The 70 GHz full map is available also at <math>N_{side}</math> 2048.
+
|Survey 1 || 91 - 270 || 240 - 5720 || 00004200 - 01059820 ||
 
+
|-
<center>
+
|Survey 2 || 270 - 456 || 5721 - 11194 || 01059830 - 02114520 ||
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>
+
|-
File: SkyMap30e.png| '''Full mission I, 30 GHz'''
+
|Survey 3 || 456 - 636 || 11195 - 16691 || 02114530 - 03193660 ||
File: SkyMap44e.png | '''Full mission I, 44 GHz'''
+
|-
File: SkyMap70e.png | '''Full mission I, 70 GHz'''
+
|Survey 4 || 636 - 807 || 16692 - 21720 || 03193670 - 04243900 ||
File: SkyMap100e.png | '''Full mission I, 100 GHz'''
+
|-
File: SkyMap143e.png | '''Full mission I, 143 GHz'''
+
|Survey 5 || 807 - 974 || 21721 - 27005 || 05267180 - 05322590 || end of mission for HFI
File: SkyMap217e.png | '''Full mission I, 217 GHz'''
+
|-
File: SkyMap353e.png | '''Full mission I, 353 GHz'''
+
|Survey 5 || 807 - 993 || n/a || 05267180 - 06344800 || end of survey for LFI
File: SkyMap545e.png | '''Full mission I, 545 GHz'''
+
|-
File: SkyMap857e.png | '''Full mission I, 857 GHz'''
+
|Survey 6 || 993 - 1177 || n/a || 06344810 - 06398120 || LFI only
</gallery>
+
|-
</center>
+
|Survey 7 || 1177 - 1358 || n/a || 06398130 - 06456410 || LFI only
<br>
+
|-
<center>
+
|Survey 8 || 1358 - 1543 || n/a || 06456420 - 06511160 || LFI only
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>
+
|-
File: LFI_SkyMap_030_1024_R2.01_full_Qb_sm1deg.png| '''Full mission Q, 30 GHz'''
+
|Survey 9 || 1543 - 1604 || n/a || 06511170 - 06533320 || LFI only Not in this delivery
File: LFI_SkyMap_044_1024_R2.01_full_Qb_sm1deg.png | '''Full mission Q, 44 GHz'''
+
|-
File: LFI_SkyMap_070_1024_R2.01_full_Qb_sm1deg.png | '''Full mission Q, 70 GHz'''
+
|HFI mission-half-1 || 91 - 531 || 240 - 13471 || 00004200 - 03155580 ||
File: HFI_Skymap_100_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 100 GHz'''
+
|-
File: HFI_Skymap_143_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 143 GHz'''
+
|HFI mission-half-2 || 531 - 974 || 13472 - 27005 || 03155590 - 05322590 ||
File: HFI_Skymap_217_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 217 GHz'''
+
|-
File: HFI_Skymap_353_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 353 GHz'''
+
|LFI Year 1 || 91 - 456 || n/a || 00004200 - 02114520 ||
</gallery>
+
|-
</center>
+
|LFI Year 2 || 456 - 807 || n/a || 02114530 - 04243900 ||
<br>
+
|-
<center>
+
|LFI Year 3 || 807 - 1177 || n/a || 05267180 - 06398120 ||
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>
+
|-
File: LFI_SkyMap_030_1024_R2.01_full_Ub_sm1deg.png| '''Full mission U, 30 GHz'''
+
|LFI Year 4 || 1177 - 1543 || n/a || 06398130 - 06511160 ||
File: LFI_SkyMap_044_1024_R2.01_full_Ub_sm1deg.png | '''Full mission U, 44 GHz'''
+
|-
File: LFI_SkyMap_070_1024_R2.01_full_Ub_sm1deg.png | '''Full mission U, 70 GHz'''
+
|}
File: HFI_Skymap_100_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 100 GHz'''
 
File: HFI_Skymap_143_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 143 GHz'''
 
File: HFI_Skymap_217_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 217 GHz'''
 
File: HFI_Skymap_353_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 353 GHz'''
 
</gallery>
 
  
</center>
+
'''Production process'''
  
 +
Sky maps are produced by combining appropriately the data of all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarised) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system.  In particular, they include the Zodiacal light emission (Zodi for short) and also the scattering from the far-side lobes of the beams (FSL).  More on this below.
  
''' Nominal mission, full channel maps (6 HFI) '''
+
''' HFI processing '''
  
These maps are similar to the ones above, but cover the nominal mission only.  They are meant primarily to be compared to the PR1 products in order to see the level of improvements in the processingBecause of this, they are produced in Temperature only, and have not had the post-processing applied.
+
The mapmaking and calibration process is described in detail in the [[Map-making_LFI | Map-making]] section and in the {{PlanckPapers|planck2014-a09}} paper, where detailed references are foundIn brief it consists of:
  
''' Single survey, full channel maps (30 HFI, 35 LFI)'''
+
; binning the TOI data onto ''rings'' : Healpix rings (HPRs) are used here, each ring containing the combined data of one pointing period.
 +
; flux calibration : at 100-353 GHz, the flux calibration factors are determined by correlating the signal with the orbital dipole, which is determined very accurately from the Planck satellite orbital parameters provided by Flight Dynamics.  This provides a single gain factor per bolometer.  At 545 and 857 GHz the gain is determined from the observation of Uranus and Neptune (but not Jupiter which is too bright) and comparison to recent models made explicitly for this mission.  A single gain is applied to all rings at these frequencies.
 +
; destriping : in order to remove low-frequency noise, an offset per ring is determined by minimizing the differences between HPRs at their crossings, and removed.
 +
; Zodiacal light correction : a Zodiacal light model is used to build HPRs of the the Zodi emission, which is subtracted from the calibrated HPRs.
 +
; projection onto the map : the offset-corrected, flux-calibrated, and Zodi-cleaned HPRs are projected onto Healpix maps, with the data of each bolometer weighted by a factor of 1/NET of that bolometer.
  
Single survey maps are built using all valid detectors of a frequency channel; they cover separately the different sky surveys.  The surveys are defined as the times over which the satellite spin axis rotates but 180 degrees, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between ~80 and 90% depending on detector position.  During adjacent surveys the sky is scanned in opposite directions. More precisely it is the ecliptic equator that is scanned in opposite directions.  While these are useful to investigate variable sources, they are also used to study the systematics of the time-response of the detectors as they scan bright sources, like the Galactic Plane, in different directions during different surveyNote that the HFI and LFI missions cover 5 and 8 surveys, respectively, and in case of HFI the last survey in incomplete.
+
These steps are followed by some post-processing which is designed to prepare the maps for the component separation work.  This post processing consists of:
The 70 GHz surveys maps are available also at <math>N_{side}</math> 2048.
 
Note LFI provide a special surveys maps combination used in the low l analysis. This maps, available at the three LFI frequency 30, 44 and 70 GHz, was built using the combination of survey 1, 3, 5, 6, 7 and 8.
 
  
''' Year maps, full channel maps (12 HFI, 16 LFI)'''
+
; Dust bandpass leakage correction : the Q and U maps are corrected for the intensity-to-polarisation leakage caused by the foregrounds having a non-CMB spectrum, and as a consequence of the non-identical bandpasses on the different detectors (bandpass mismatch, or BPM). This correction is determined using the ''ground'' method as described in Section 7.3 of {{PlanckPapers|planck2014-a09}}. These correction maps can be found in the Planck Legacy Archive as ''HFI_CorrMap_???-dustleak-ground_2048_R2.0?_{coverage}.fits''. The correction is applied by subtracting the correction map from the corresponding input map.  This correction is not applied to the nominal mission maps in order to maintain compatibility with the PR1 products. ''In fact this correction was computed and applied only to the products used in component separation'', so they were not applied to the single survey maps and to the half-ring maps, which are considered characterisation products.
 +
; Far Side Lobe calibration correction : the 100-217 maps are multiplied by factors of 1.00087, 1.00046, and 1.00043, respectively, to compensate for the non-removal of the far-side lobes, and similarly the corresponding covariance maps have also been corrected by multiplication by the square of the factor.
 +
; Fill missing pixels : missing pixels are filled in with a value that is the mean of valid pixels within a given radius.  A radius of 1 deg is used for the full channel maps, and 1.5 deg is used for the detset maps.  This step is not applied to the single survey maps since they have large swaths of the sky that are not covered.
  
These maps are built using the data of surveys 1+2, surveys 3+4, and so forthThey are used to study long-term systematic effects.
+
; Map zero-level : for the  100 to 857 GHz maps, the zero levels are set to their optimal levels for Galactic and CIB studiesA procedure for adjusting them to astrophysical values is given in the HFI Mapmaking and Calibration paper {{PlanckPapers|planck2014-a09}}.
The 70 GHz years maps are available also at <math>N_{side}</math> 2048.
 
  
'''Half-mission maps, full channel maps (12 HFI, 12 LFI)'''
+
These maps provide the main mission products.  Together with signal maps, hit count, variance, and variance maps are also produced. The hit maps give the (integer) number of valid TOI-level samples that contribute to the signal of each pixel. All valid samples are counted in the same way, i.e., there is no weighting factor applied.  The variance maps project the white noise estimate, provided by the NETs, in the sky domain.
  
For HFI, the half mission is defined after eliminating those rings discarded for all bolometers. There are 347 such rings, may of which are during the 5th survey when the ''End-of-Life'' tests were performed.  The remaining 26419 rings are divided in half (up to the odd ring) to define the two halves of the mission.  This exercise is done for the full mission only.
+
Note that the nominal mission maps have not had the post-processing applied, which makes them more easily comparable to the PR1 products.
  
For LFI instead of the half-mission the following year combination has been created: Year 1+2, Year 1+3, Year 2+4, Year 3+4,  
+
''' LFI processing '''
 +
LFI maps were constructed with the Madam map-making code, version 3.7.4. The code is based on generalized destriping technique, where the correlated noise component is modeled as a sequence of constant offset, called baselines. A noise filter was used to constrain the baseline solution allowing the use of 0.25 s and 1 second baselines for the 30 and 44, 70 GHz respectively.
  
'''Full mission, single detector maps (18 HFI, 22 LFI)'''
+
Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The used weights are listed in [[Map-making LFI#Map-making|Map-making]]. The flagged samples were excluded from the analysis by setting their weights to <math>C_{w}^{-1}</math> = 0. The galaxy region was masked out in the destriping phase, to reduce error arising from strong signal gradients. The polarization component was included in the analysis...
  
IN case of HFI these maps are built only for the SWBs (non polarized) and contain only temperature data, of course.  They are not built for the polarisation sensitive detectors because they are not fixed on the sky as the polarisation component depends on the position angle at the time of observation. Instead, we provide maps built by ''quads'' of polarisation-sensitive detectors (see next section), which have different polarisation angles and that can be used to built I, Q, and U maps
+
; Dipole and Far Side Lobe correction : input timelines are cleaned by 4pi convolved dipole and Galactic Straylight obtained as convolution of the 4pi in band far sidelobes and Galactic Simulation as explained in Section 7.4 of {{PlanckPapers|planck2014-a03}}.
  
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
+
Beam effects on the LFI maps are described in Section 7.1 of {{PlanckPapers|planck2014-a03}}. Scaling of the maps due to beam effects is taken into account in the LFI's beam functions (as provided in the RIMO, give reference) which should be used for analysis of diffuse components. To compute the flux densities of compact sources, correction must be made for beam effects (see Table 8 of {{PlanckPapers|planck2014-a03}})."
|+ '''HFI Temperature sensitive bolometers'''
 
|- bgcolor="ffdead" 
 
!Frequency || Detector names
 
|-
 
|143 GHz || 143-5, 6, 7
 
|-
 
|217 GHz || 217-1, 2, 3, 4
 
|-
 
|353 GHz || 353-1, 2, 7, 8
 
|-
 
|545 GHz || 545-1, 2, 4
 
|-
 
|857 GHz || 857-1, 2 , 3, 4
 
|}
 
  
The 143-8 and 353-3 bolometer data are affected by strong RTS (random telegraphic signal) noise.  They have not been used in the data processing, and are not delivered. For a figure showing the focal plane layout, see [[Detector_pointing#Introduction_and_Summary | this Introduction]] of the Detector Pointing chapter.
+
; Bandpass leakage correction : '''as opposed to the HFI, the LFI high resolution maps have not been corrected for bandpass leakage. Only low resolution (nside 256) maps are provided with the bandpass correction'''. The correction maps (LFI_CorrMap_0??-BPassCorr_*.fits) can be found in the Planck Legacy Archive. Further details about the procedure used to generate the bandpass correction maps can be found in Section 11 of {{PlanckPapers|planck2014-a03}}.
  
In case of LFI, all the 22 Radiometers maps are available, those, obviously, are only in temperature.
+
; Map zero-level : for the 30, 44 and 70 GHz, maps are corrected for zero level monopole by applying an offset correction, see LFI Calibration paper {{PlanckPapers|planck2014-a06}}. Note that the offset applied is indicated in the header as a comment keyword.
  
'''Full mission, detector set or detector pairs maps (8 HFI, 8 LFI)'''
+
A detailed description of the map-making procedure is given in {{PlanckPapers|planck2013-p02}}, {{PlanckPapers|planck2014-a03}}, {{PlanckPapers|planck2014-a07}} and in section [[Map-making LFI#Map-making|Map-making]].
  
The objective here is to build independent temperature (I) and polarisation (Q and U) maps with the two pairs of polarisation sensitive detectors of each channel where they are available, i.e. in the 44-353 GHz channels.  The table below indicates which detectors were used to built each detector set (detset).
+
'''Types of maps '''
  
 +
''' Full mission, full channel maps (6 HFI, 4 LFI)'''
  
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
+
Full channel maps are built using all the valid detectors of a frequency channel and cover the either the full or the nominal mission.  For HFI, the 143-8 and 545-3 bolometers are rejected entirely as they are seriously affected by RTS noise. HFI provides the Q and U components for the 100, 143, 217 and 353 GHz channels only. LFI provides the I, Q and U maps for all the channels. Reminder: HFI Q and U maps are corrected for bandpass leakage but LFI Q and U maps are not. The I, Q and U maps are displayed in the figures below. The color range is set using a histogram equalisation scheme (from HEALPIX) that is useful for these non-Gaussian data fields. For visualization purposes, the Q and U maps shown here have been smoothed with a 1 degree Gaussian kernel, otherwise they look like noise to the naked eye.
|+ '''Definition of HFI Detector Sets'''
+
The 70 GHz full map is available also at <math>N_{side}</math> 2048.
|- bgcolor="ffdead" 
 
!Frequency || DetSet1 || DetSet2
 
|-
 
|100 GHz || 100-1a/b & 100-4a/b || 100-2a/b & 100-3a/b
 
|-
 
|143 GHz || 143-1a/b 1 & 43-3a/b || 143-2a/b & 143-4a/b
 
|-
 
|217 GHz || 217-5a/b & 217-7a/b || 217-6a/b & 217-8a/b
 
|-
 
|353 GHz || 353-3a/b & 353-5a/b || 353-4a/b & 353-6a/b
 
|}
 
  
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
+
<center>
|+ '''Definition of LFI Detector Pairs'''
+
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>
|- bgcolor="ffdead" 
+
File: SkyMap30e.png| '''Full mission I, 30 GHz'''
!Frequency || Horn Pair || Comment
+
File: SkyMap44e.png | '''Full mission I, 44 GHz'''
|-
+
File: SkyMap70e.png | '''Full mission I, 70 GHz'''
|44 GHz || 24 || This maps is only in temperature
+
File: SkyMap100e.png | '''Full mission I, 100 GHz'''
|-
+
File: SkyMap143e.png | '''Full mission I, 143 GHz'''
|44 GHz || 25  & 26 ||
+
File: SkyMap217e.png | '''Full mission I, 217 GHz'''
|-
+
File: SkyMap353e.png | '''Full mission I, 353 GHz'''
|70 GHz || 18 & 23 || Available also at <math>N_{side}</math> = 2048
+
File: SkyMap545e.png | '''Full mission I, 545 GHz'''
|-
+
File: SkyMap857e.png | '''Full mission I, 857 GHz'''
|70 GHz || 19 & 22 || Available also at <math>N_{side}</math> = 2048
+
</gallery>
|-
+
</center>
|70 GHz || 20 & 21 || Available also at <math>N_{side}</math> = 2048
+
<br>
|}
+
<center>
 
+
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>  
 
+
File: LFI_SkyMap_030_1024_R2.01_full_Qb_sm1deg.png| '''Full mission Q, 30 GHz'''
'''Half-ring maps (64 HFI, 62 LFI)'''
+
File: LFI_SkyMap_044_1024_R2.01_full_Qb_sm1deg.png | '''Full mission Q, 44 GHz'''
 
+
File: LFI_SkyMap_070_1024_R2.01_full_Qb_sm1deg.png | '''Full mission Q, 70 GHz'''
These maps are similar to the ones above, but are built using only the first or the second half of each ring (or pointing period).   The HFI provides half-ring maps for the full mission only, and for the full channel, the detsets, and the single bolometers. The LFI provides half-rings maps for the channel full mission (70 GHz also at <math>N_{side}</math> 2048), for the radiometer full mission and the horn pairs full mission.
+
File: HFI_Skymap_100_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 100 GHz'''
<!----
+
File: HFI_Skymap_143_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 143 GHz'''
'''Masks'''
+
File: HFI_Skymap_217_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 217 GHz'''
 +
File: HFI_Skymap_353_full_bplcorrected_sm1deg_Qb.png | '''Full mission Q, 353 GHz'''
 +
</gallery>
 +
</center>
 +
<br>
 +
<center>
 +
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>
 +
File: LFI_SkyMap_030_1024_R2.01_full_Ub_sm1deg.png| '''Full mission U, 30 GHz'''
 +
File: LFI_SkyMap_044_1024_R2.01_full_Ub_sm1deg.png | '''Full mission U, 44 GHz'''
 +
File: LFI_SkyMap_070_1024_R2.01_full_Ub_sm1deg.png | '''Full mission U, 70 GHz'''
 +
File: HFI_Skymap_100_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 100 GHz'''
 +
File: HFI_Skymap_143_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 143 GHz'''
 +
File: HFI_Skymap_217_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 217 GHz'''
 +
File: HFI_Skymap_353_full_bplcorrected_sm1deg_Ub.png | '''Full mission U, 353 GHz'''
 +
</gallery>
  
Masks are provided of the Galactic Plane and of the point sources.  For the Galactic Plane, eight masks are given covering different fractions of the sky, and for the points sources two masks are given, at the 5 and 10 sigma level, for each Planck HFI and LFI frequency channel. These are generic masks, specific masks applicable to other products are delivered with the products themselves.
+
</center>
--->
 
  
''' The Zodiacal light correction maps '''
+
''' Full mission light maps, full channel maps (6 HFI, 7 LFI) '''
  
The Zodiacal light signal depends on the location of the observer relative to the Zodiacal light bands, and thus it is not a fixed pattern on the sky but depends on the period of observation. The maps presented here are the difference between the uncorrected (and not delivered) and the corrected maps.
+
These maps are based on the Full mission maps but contain fewer columns, IQU from 30 to 353 GHz, and I only at 545 and 857 GHz. These maps have been produced to reduce the transfer time of the most downloaded frequency full mission maps.
  
Note that while the Zodiacal light model that is subtracted at ring level (see [[Map-making#Zodiacal_light_correction | here]]) is not polarised, the corrections are not null and Q and U.  This is suspected to come from some combination of leakage due to bandpass differences and beam mismatch, and maybe other effects. These leakages are typically of order a few %, at max, of the maximum zodi intensity at I for each channel. They range from ~150 nK at 100 GHz to ~5 uK at 353 GHz.
+
''' Nominal mission, full channel maps (6 HFI) '''
  
''' Caveats and known issues '''
+
These maps are similar to the ones above, but cover the nominal mission only.  They are meant primarily to be compared to the PR1 products in order to see the level of improvements in the processing.  Because of this, they are produced in Temperature only, and have not had the post-processing applied.
  
; HFI polarization 100-217 GHz : at low multipoles, despite the progress that has been made to control the systematic effects present in the maps, polarization data between 100-217 GHz are still contaminated by systematic residuals. Figure 10 of {{PlanckPapers|planck2014-a09}} shows the EE power spectra from the half-difference maps at 100, 143, and 217 GHz and compared to the noise power spectrum from FFP8 simulations. he half-ring differences are compatible with noise while, at multipoles typically lower than 50, detector-set and half-mission differences are dominated by excess power which is larger than the EE CMB signal. The Planck Collaboration has used the range ell>30 to carry out component separation ({{PlanckPapers|planck2014-a11}}), as data at ell<30 is not considered usable for cosmological analyses. The origin of the excess power will be explored in a forthcoming publication.
+
''' Single survey, full channel maps (30 HFI, 35 LFI)'''
 
  
'''Inputs'''
+
Single survey maps are built using all valid detectors of a frequency channel; they cover separately the different sky surveys.  The surveys are defined as the times over which the satellite spin axis rotates but 180 degrees, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between ~80 and 90% depending on detector position.  During adjacent surveys the sky is scanned in opposite directions. More precisely it is the ecliptic equator that is scanned in opposite directions.  While these are useful to investigate variable sources, they are also used to study the systematics of the time-response of the detectors as they scan bright sources, like the Galactic Plane, in different directions during different survey.  Note that the HFI and LFI missions cover 5 and 8 surveys, respectively, and in case of HFI the last survey in incomplete.
''' HFI inputs '''
+
The 70 GHz surveys maps are available also at <math>N_{side}</math> 2048.
 +
Note LFI provide a special surveys maps combination used in the low l analysis. This maps, available at the three LFI frequency 30, 44 and 70 GHz, was built using the combination of survey 1, 3, 5, 6, 7 and 8.
  
The HFI mapmaking takes as input:
+
''' Year maps, full channel maps (12 HFI, 16 LFI)'''
* the cleaned TOIs of signal of each detector, together with their flags, produced by the [[TOI processing|TOI processing]] pipeline;
 
* the TOIs of pointing (quaternions), described in [[Detector_pointing|Detector pointing]];
 
* bolometer-level characterization data, from the DPC's internal IMO (not distributed);
 
* Planck orbit data, used to compute and remove the Earth's dipole;
 
* Planck solar dipole information, used to calibrate the CMB channels;
 
* Planet models used to calibrate the Galactic channels.
 
  
''' LFI inputs '''
+
These maps are built using the data of surveys 1+2, surveys 3+4, and so forth.  They are used to study long-term systematic effects.
 +
The 70 GHz years maps are available also at <math>N_{side}</math> 2048.
  
The Madam mapmaker takes as input:
+
'''Half-mission maps, full channel maps (12 HFI, 12 LFI)'''
  
* the calibrated timelines (for details see [[TOI processing LFI|TOI Processing]]);
+
For HFI, the half mission is defined after eliminating those rings discarded for all bolometers. There are 347 such rings, may of which are during the 5th survey when the ''End-of-Life'' tests were performed.  The remaining 26419 rings are divided in half (up to the odd ring) to define the two halves of the mission.  This exercise is done for the full mission only.
* the detector pointings (for details see [[Detector_pointing|Detector pointing]]);
 
* the noise information in the form of 3-parameter (white noise level, &sigma;, slope, and knee frequency, <i>f</i><sub>knee</sub>) noise model (for details see  [[The RIMO|RIMO]])
 
  
'''Related products'''
+
For LFI instead of the half-mission the following year combination has been created: Year 1+2, Year 1+3, Year 2+4, Year 3+4,
''' Masks '''
 
  
This section presents the masks of the point sources and of the Galactic plane.  These are ''general purpose'' masks.  Other masks specific to certain products are packaged with the products.
+
'''Full mission, single detector maps (18 HFI, 22 LFI)'''
  
'''Point source masks'''
+
IN case of HFI these maps are built only for the SWBs (non polarized) and contain only temperature data, of course.  They are not built for the polarisation sensitive detectors because they are not fixed on the sky as the polarisation component depends on the position angle at the time of observation.  Instead, we provide maps built by ''quads'' of polarisation-sensitive detectors (see next section), which have different polarisation angles and that can be used to built I, Q, and U maps
  
For HFI and LFI two sets of masks are provided:
+
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
* Intensity masks, which removes sources detected with SNR > 5.
+
|+ '''HFI Temperature sensitive bolometers'''
* Polarisation masks, which remove sources which have polarisation detection significance of 99.97 % or greater at the position of a source detected in intensity.  They were derived from the polarisation maps with dust ground bandpass mismatch leakage correction applied. The cut around each source has a radius of 3σ (width) of the beam ~ 1.27 FWHM (for LFI the cut around each source has a radius of 32 arcmin at 30GHz, 27 arcmin at 44 GHz and 13 arcmin at 70 GHz).
+
|- bgcolor="ffdead" 
 
+
!Frequency || Detector names
Both sets are found in the files ''HFI_Mask_PointSrc_2048_R2.00.fits'' and  ''LFI_Mask_PointSrc_2048_R2.00.fits'' in which the first extension contains the Intensity masks, and the second contains the Polarisation masks.
+
|-
 
+
|143 GHz || 143-5, 6, 7
'''Galactic plane masks'''
+
|-
 
+
|217 GHz || 217-1, 2, 3, 4
Eight masks are provided giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage derived from the 353 GHz map, after CMB subtraction. They are independent of frequency channel. Three versions of these are given: not apodized, and apodized by 2 and 5 deg.  The filenames are ''HFI_Mask_GalPlane-apoN_2048_R2.00.fits'', where N = 0, 2, 5.
+
|-
 +
|353 GHz || 353-1, 2, 7, 8
 +
|-
 +
|545 GHz || 545-1, 2, 4
 +
|-
 +
|857 GHz || 857-1, 2 , 3, 4
 +
|}
  
The masks are shows below. The 8 GalPlane masks are combined (added together) and shown in a single figure for each of the three apodization.  While the result is quite clear for the case of no apodization, it is less so for the apodized case.  The point source masks are shown separately for the Intensity case.
+
The 143-8 and 353-3 bolometer data are affected by strong RTS (random telegraphic signal) noise.  They have not been used in the data processing, and are not delivered.  For a figure showing the focal plane layout, see [[Detector_pointing#Introduction_and_Summary | this Introduction]] of the Detector Pointing chapter.
  
<center>
+
In case of LFI, all the 22 Radiometers maps are available, those, obviously, are only in temperature.
<gallery perrow=3 widths=260px heights=160px >
 
File: GalPlaneMask_apo0.png |  '''Galactic Plane masks, no apod'''
 
File: GalPlaneMask_apo2.png |  '''Galactic Plane masks, apod 2 deg'''
 
File: GalPlaneMask_apo5.png |  '''Galactic Plane masks, apod 5 deg'''
 
File: PointSrcMask_100.png  | '''PointSource mask 100 GHz'''
 
File: PointSrcMask_143.png  | '''PointSource mask 143 GHz'''
 
File: PointSrcMask_217.png  | '''PointSource mask 217 GHz'''
 
File: PointSrcMask_353.png  | '''PointSource mask 343 GHz'''
 
File: PointSrcMask_545.png  | '''PointSource mask 545 GHz'''
 
File: PointSrcMask_857.png  | '''PointSource mask 857 GHz'''
 
</gallery>
 
</center>
 
  
''' File names '''
+
'''Full mission, detector set or detector pairs maps (8 HFI, 8 LFI)'''
The FITS filenames are of the form ''{H|L}FI_SkyMap_fff{-tag}_Nside_R2.nn_{coverage}-{type}.fits'', where ''fff'' are three digits to indicate the Planck frequency band, ''tag'' indicates the single detector or the detset,  ''Nside'' is the Healpix Nside of the map, ''coverage'' indicates which part of the mission is covered (full, half mission, survey, year, ...) , and the optional ''type'' indicates the subset of input data used.  The table below lists the products by type, with the appropriate unix wildcards that form the full filename.
 
  
{| class="wikitable" align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=880px
+
The objective here is to build independent temperature (I) and polarisation (Q and U) maps with the two pairs of polarisation sensitive detectors of each channel where they are available, i.e. in the 44-353 GHz channels.  The table below indicates which detectors were used to built each detector set (detset).
|+ '''HFI FITS filenames'''
+
 
|- bgcolor="ffdead"
+
 
! Coverage  || filename  || half-ring filename
+
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
 +
|+ '''Definition of HFI Detector Sets'''
 +
|- bgcolor="ffdead"  
 +
!Frequency || DetSet1 || DetSet2
 
|-
 
|-
| Full chan, full mission ||HFI_SkyMap_???_2048_R2.??_full.fits ||HFI_SkyMap_???_2048_R2.??_full-ringhalf-?.fits
+
|100 GHz || 100-1a/b  & 100-4a/b || 100-2a/b & 100-3a/b
 
|-
 
|-
| Full channel, nominal mission ||HFI_SkyMap_???_2048_R2.??_nominal.fits || n/a
+
|143 GHz || 143-1a/b 1 & 43-3a/b || 143-2a/b & 143-4a/b
 
|-
 
|-
| Full channel, single survey || HFI_SkyMap_???_2048_R2.??_survey-?.fits || n/a
+
|217 GHz || 217-5a/b & 217-7a/b || 217-6a/b & 217-8a/b
 
|-
 
|-
| Full channel, single year || HFI_SkyMap_???_2048_R2.??_year-?.fits  || n/a
+
|353 GHz || 353-3a/b & 353-5a/b || 353-4a/b & 353-6a/b
|-
 
| Full channel, half mission || HFI_SkyMap_???_2048_R2.??_halfmission*-?.fits || n/a
 
|-
 
| Det-set, full mission || HFI_SkyMap_???-ds?_2048_R2.??_full.fits || HFI_SkyMap_???-ds?_2048_R2.??_full-ringhalf-?.fits
 
|-
 
|Single SWB, full mission || HFI_SkyMap_???-?_2048_R2.??_full.fits || HFI_SkyMap_???-?_2048_R2.??_full-ringhalf-?.fits
 
 
|}
 
|}
  
{| class="wikitable" align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=1000px
+
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=600px
|+ '''LFI FITS filenames'''
+
|+ '''Definition of LFI Detector Pairs'''
|- bgcolor="ffdead"
+
|- bgcolor="ffdead"  
! Coverage  || filename  ||  half-ring filename || Comment
+
!Frequency || Horn Pair || Comment  
 
|-
 
|-
| Full channel, full mission ||LFI_SkyMap_???_1024_R2.??_full.fits ||LFI_SkyMap_???_1024_R2.??_full-ringhalf-?.fits || Available also at Nside = 2048
+
|44 GHz || 24 || This maps is only in temperature
 
|-
 
|-
| Full channel, single survey || LFI_SkyMap_???_1024_R2.??_survey-?.fits || n/a || Available also at Nside = 2048
+
|44 GHz || 25  & 26 ||  
 
|-
 
|-
| Full channel, survey combination || LFI_SkyMap_???_1024_R2.??_survey-1-3-5-6-7-8.fits || n/a || n/a
+
|70 GHz || 18 & 23 || Available also at <math>N_{side}</math> = 2048
 
|-
 
|-
| Full channel, single year || LFI_SkyMap_???_1024_R2.??_year-?.fits  || n/a || Available also at Nside = 2048
+
|70 GHz || 19 & 22 || Available also at <math>N_{side}</math> = 2048
 
|-
 
|-
| Full channel, year combination || LFI_SkyMap_???_1024_R2.??_year?-?.fits || n/a || n/a
+
|70 GHz || 20 & 21 || Available also at <math>N_{side}</math> = 2048
|-
 
| Horn pair, full mission || LFI_SkyMap_???-??-??_1024_R2.??_full.fits || LFI_SkyMap_???_??-??_1024_R2.??_full-ringhalf-?.fits || Available also at Nside = 2048
 
|-
 
| Single radiometer, full mission || LFI_SkyMap_???-???_1024_R2.??_full.fits || LFI_SkyMap_???-???_1024_R2.??_full-ringhalf-?.fits || n/a
 
 
|}
 
|}
  
  
 +
'''Half-ring maps (64 HFI, 62 LFI)'''
  
For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the 9 frequency maps as separate columns in a single extension. The 9 columns in this file contain the intensity maps ONLY and no other information (hit maps and variance maps) is provided.
+
These maps are similar to the ones above, but are built using only the first or the second half of each ring (or pointing period).  The HFI provides half-ring maps for the full mission only, and for the full channel, the detsets, and the single bolometers. The LFI provides half-rings maps for the channel full mission (70 GHz also at <math>N_{side}</math> 2048), for the radiometer full mission and the horn pairs full mission.
 +
<!----
 +
'''Masks'''
  
<!---
+
Masks are provided of the Galactic Plane and of the point sources.  For the Galactic Plane, eight masks are given covering different fractions of the sky, and for the points sources two masks are given, at the 5 and 10 sigma level, for each Planck HFI and LFI frequency channel. These are generic masks, specific masks applicable to other products are delivered with the products themselves.
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="3" cellspacing="0"  width=500px
+
--->
|+ '''FITS filenames'''
+
 
|- bgcolor="ffdead"
+
''' The Zodiacal light correction maps '''
! Frequency || Full channel maps
+
 
|-
+
The Zodiacal light signal depends on the location of the observer relative to the Zodiacal light bands, and thus it is not a fixed pattern on the sky but depends on the period of observation. The maps presented here are the difference between the uncorrected (and not delivered) and the corrected maps
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal.fits|link=LFI_SkyMap_030_1024_R1.10_nominal.fits}}
+
 
|-
+
Note that while the Zodiacal light model that is subtracted at ring level (see [[Map-making#Zodiacal_light_correction | here]]) is not polarised, the corrections are not null and Q and U. This is suspected to come from some combination of leakage due to bandpass differences and beam mismatch, and maybe other effects. These leakages are typically of order a few %, at max, of the maximum zodi intensity at I for each channel. They range from ~150 nK at 100 GHz to ~5 uK at 353 GHz.
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal.fits|link=LFI_SkyMap_044_1024_R1.10_nominal.fits}}
+
 
|-
+
''' Caveats and known issues '''
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal.fits|link=LFI_SkyMap_070_1024_R1.10_nominal.fits}}
+
 
|-
+
; HFI polarization 100-217 GHz : at low multipoles, despite the progress that has been made to control the systematic effects present in the maps, polarization data between 100-217 GHz are still contaminated by systematic residuals. Figure 10 of {{PlanckPapers|planck2014-a09}} shows the EE power spectra from the half-difference maps at 100, 143, and 217 GHz and compared to the noise power spectrum from FFP8 simulations. he half-ring differences are compatible with noise while, at multipoles typically lower than 50, detector-set and half-mission differences are dominated by excess power which is larger than the EE CMB signal. The Planck Collaboration has used the range ell>30 to carry out component separation ({{PlanckPapers|planck2014-a11}}), as data at ell<30 is not considered usable for cosmological analyses. The origin of the excess power will be explored in a forthcoming publication.
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal.fits|link=LFI_SkyMap_070_2048_R1.10_nominal.fits}}
+
   
|-
+
 
| '''100GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal.fits|link=HFI_SkyMap_100_2048_R1.10_nominal.fits}}
+
'''Inputs'''
|-
+
''' HFI inputs '''
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal.fits|link=HFI_SkyMap_143_2048_R1.10_nominal.fits}}
+
 
|-
+
The HFI mapmaking takes as input:
| '''217GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal.fits|link=HFI_SkyMap_217_2048_R1.10_nominal.fits}}
+
* the cleaned TOIs of signal of each detector, together with their flags, produced by the [[TOI processing|TOI processing]] pipeline;
|-
+
* the TOIs of pointing (quaternions), described in [[Detector_pointing|Detector pointing]];
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal.fits|link=HFI_SkyMap_353_2048_R1.10_nominal.fits}}
+
* bolometer-level characterization data, from the DPC's internal IMO (not distributed);
|-
+
* Planck orbit data, used to compute and remove the Earth's dipole;
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal.fits|link=HFI_SkyMap_545_2048_R1.10_nominal.fits}}
+
* Planck solar dipole information, used to calibrate the CMB channels;
|-
+
* Planet models used to calibrate the Galactic channels.
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal.fits|link=HFI_SkyMap_857_2048_R1.10_nominal.fits}}
+
 
|- bgcolor="ffdead"
+
''' LFI inputs '''
! Frequency || Full channel, Zodi-corrected maps
+
 
|-
+
The Madam mapmaker takes as input:
| '''100GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
| '''217GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|- bgcolor="ffdead"
 
! Frequency ||  Combined frequency maps
 
|-
 
| '''All''' ||  {{PLASingleFile|fileType=file|name=COM_MapSet_I-allFreqs_R1.10_nominal.fits|link=COM_MapSet_I-allFreqs_R1.10_nominal.fits}}
 
|}
 
  
 +
* the calibrated timelines (for details see [[TOI processing LFI|TOI Processing]]);
 +
* the detector pointings (for details see [[Detector_pointing|Detector pointing]]);
 +
* the noise information in the form of 3-parameter (white noise level, &sigma;, slope, and knee frequency, <i>f</i><sub>knee</sub>) noise model (for details see  [[The RIMO|RIMO]])
  
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="3" cellspacing="0" width=850px
+
'''Related products'''
|+ '''FITS filenames'''
+
''' Masks '''
|- bgcolor="ffdead"
+
 
! Frequency || Survey 1 maps || Survey 2 maps
+
This section presents the masks of the point sources and of the Galactic plane.  These are ''general purpose'' masks. Other masks specific to certain products are packaged with the products.
|-
+
 
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_1.fits|link=LFI_SkyMap_030_1024_R1.10_survey_1.fits}} ||
+
'''Point source masks'''
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_2.fits|link=LFI_SkyMap_030_1024_R1.10_survey_2.fits}}
+
 
|-
+
For HFI and LFI two sets of masks are provided: 
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_1.fits|link=LFI_SkyMap_044_1024_R1.10_survey_1.fits}} ||
+
* Intensity masks, which removes sources detected with SNR > 5.
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_2.fits|link=LFI_SkyMap_044_1024_R1.10_survey_2.fits}}
+
* Polarisation masks, which remove sources which have polarisation detection significance of 99.97 % or greater at the position of a source detected in intensity. They were derived from the polarisation maps with dust ground bandpass mismatch leakage correction applied. The cut around each source has a radius of 3σ (width) of the beam ~ 1.27 FWHM (for LFI the cut around each source has a radius of 32 arcmin at 30GHz, 27 arcmin at 44 GHz and 13 arcmin at 70 GHz).
|-
+
 
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_1.fits|link=LFI_SkyMap_070_1024_R1.10_survey_1.fits}} ||
+
Both sets are found in the files ''HFI_Mask_PointSrc_2048_R2.00.fits'' and  ''LFI_Mask_PointSrc_2048_R2.00.fits'' in which the first extension contains the Intensity masks, and the second contains the Polarisation masks.
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_2.fits|link=LFI_SkyMap_070_1024_R1.10_survey_2.fits}}
+
 
|-
+
'''Galactic plane masks'''
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_1.fits|link=LFI_SkyMap_070_2048_R1.10_survey_1.fits}} ||
+
 
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_2.fits|link=LFI_SkyMap_070_2048_R1.10_survey_2.fits}}
+
Eight masks are provided giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage derived from the 353 GHz map, after CMB subtraction. They are independent of frequency channel. Three versions of these are given: not apodized, and apodized by 2 and 5 deg.  The filenames are ''HFI_Mask_GalPlane-apoN_2048_R2.00.fits'', where N = 0, 2, 5.
|-
+
 
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1.fits}} ||
+
The masks are shows below. The 8 GalPlane masks are combined (added together) and shown in a single figure for each of the three apodization.   While the result is quite clear for the case of no apodization, it is less so for the apodized case. The point source masks are shown separately for the Intensity case.
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2.fits}}
+
 
|-
+
<center>
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1.fits}} ||
+
<gallery perrow=3 widths=260px heights=160px >
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2.fits}}
+
File: GalPlaneMask_apo0.png | '''Galactic Plane masks, no apod'''
|-
+
File: GalPlaneMask_apo2.png | '''Galactic Plane masks, apod 2 deg'''
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1.fits}} ||
+
File: GalPlaneMask_apo5.png | '''Galactic Plane masks, apod 5 deg'''
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2.fits}}
+
File: PointSrcMask_100.png  | '''PointSource mask 100 GHz'''
|-
+
File: PointSrcMask_143.png  | '''PointSource mask 143 GHz'''
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1.fits}} ||
+
File: PointSrcMask_217.png  | '''PointSource mask 217 GHz'''
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2.fits}}
+
File: PointSrcMask_353.png  | '''PointSource mask 343 GHz'''
|-
+
File: PointSrcMask_545.png  | '''PointSource mask 545 GHz'''
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1.fits}} ||
+
File: PointSrcMask_857.png  | '''PointSource mask 857 GHz'''
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2.fits}}
+
</gallery>
|-
+
</center>
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1.fits}} ||
+
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2.fits}}
+
''' File names '''
 +
The FITS filenames are of the form ''{H|L}FI_SkyMap_fff{-tag}_Nside_R2.nn_{coverage}-{type}.fits'', where ''fff'' are three digits to indicate the Planck frequency band, ''tag'' indicates the single detector or the detset,  ''Nside'' is the Healpix Nside of the map, ''coverage'' indicates which part of the mission is covered (full, half mission, survey, year, ...) , and the optional ''type'' indicates the subset of input data used. The table below lists the products by type, with the appropriate unix wildcards that form the full filename.
 +
 
 +
{| class="wikitable"  align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=880px
 +
|+ '''HFI FITS filenames'''
 
|- bgcolor="ffdead"
 
|- bgcolor="ffdead"
! Frequency ||  Survey 1 Zodi-corrected maps || Survey 2 Zodi-corrected maps
+
! Coverage  ||  filename  || half-ring filename
 
|-
 
|-
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| Full chan, full mission ||HFI_SkyMap_???_2048_R2.??_full.fits ||HFI_SkyMap_???_2048_R2.??_full-ringhalf-?.fits
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| Full channel, nominal mission ||HFI_SkyMap_???_2048_R2.??_nominal.fits || n/a
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| Full channel, single survey || HFI_SkyMap_???_2048_R2.??_survey-?.fits || n/a
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits}}
+
|-
 +
| Full channel, single year || HFI_SkyMap_???_2048_R2.??_year-?.fits || n/a
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| Full channel, half mission || HFI_SkyMap_???_2048_R2.??_halfmission*-?.fits || n/a
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
 
|-
 
|-
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
| Det-set, full mission || HFI_SkyMap_???-ds?_2048_R2.??_full.fits || HFI_SkyMap_???-ds?_2048_R2.??_full-ringhalf-?.fits
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
 
|-
 
|-
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
+
|Single SWB, full mission || HFI_SkyMap_???-?_2048_R2.??_full.fits || HFI_SkyMap_???-?_2048_R2.??_full-ringhalf-?.fits
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits}}
+
|}
 +
 
 +
{| class="wikitable"  align="center" style="text-align"left" border="1" cellpadding="15" cellspacing="20"  width=1000px
 +
|+ '''LFI FITS filenames'''
 
|- bgcolor="ffdead"
 
|- bgcolor="ffdead"
! Frequency ||  Half-ring 1 maps ||Half-ring 2 maps
+
! Coverage  ||  filename  ||  half-ring filename || Comment
 
|-
 
|-
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits}} ||
+
| Full channel, full mission ||LFI_SkyMap_???_1024_R2.??_full.fits ||LFI_SkyMap_???_1024_R2.??_full-ringhalf-?.fits || Available also at Nside = 2048
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits}} ||
+
| Full channel, single survey || LFI_SkyMap_???_1024_R2.??_survey-?.fits || n/a || Available also at Nside = 2048
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits}} ||
+
| Full channel, survey combination || LFI_SkyMap_???_1024_R2.??_survey-1-3-5-6-7-8.fits || n/a || n/a
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| Full channel, single year || LFI_SkyMap_???_1024_R2.??_year-?.fits || n/a || Available also at Nside = 2048
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| Full channel, year combination || LFI_SkyMap_???_1024_R2.??_year?-?.fits || n/a || n/a
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| Horn pair, full mission || LFI_SkyMap_???-??-??_1024_R2.??_full.fits || LFI_SkyMap_???_??-??_1024_R2.??_full-ringhalf-?.fits || Available also at Nside = 2048
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits}} ||
+
| Single radiometer, full mission || LFI_SkyMap_???-???_1024_R2.??_full.fits || LFI_SkyMap_???-???_1024_R2.??_full-ringhalf-?.fits || n/a
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''353GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''545GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''857GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits}}
 
 
|}
 
|}
--->
 
  
''' FITS file structure '''
 
  
The FITS files for the sky maps contain a minimal primary header with no data, and a ''BINTABLE'' extension (EXTENSION 1, EXTNAME = ''FREQ-MAP'') containing the data.  The structure is shows schematically in the figure below.  The ''FREQ-MAP'' extension contains a 3- or a 10-column table that contain the signal, hit-count and variance maps, all in Healpix format.  The 3-column case is for intensity only maps, the 10-column case is for polarisation. The number of rows is the number of map pixels, which is Npix = 12 <math>N_{side}</math><sup>2</sup> for Healpix maps, where <math>N_{side}</math> = 1024 or 2048 for most the maps presented in this chapter.
 
  
[[File:FITS_FreqMap.png | 550px  | center | thumb | '''FITS file structure''']]
+
For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the 9 frequency maps as separate columns in a single extension. The 9 columns in this file contain the intensity maps ONLY and no other information (hit maps and variance maps) is provided.
  
Note that file sizes are ~0.6 GB for I-only maps and ~1.9 GB for I,Q,U maps at <math>N_{side}</math> 2048 and ~0.14 GB for I-only maps and ~0.45 GB for I,Q,U maps at <math>N_{side}</math> 1024 .
+
<!---
 
+
{| class="wikitable" align="center" style="text-align:center" border="1" cellpadding="3" cellspacing="0" width=500px
Keywords indicate the coordinate system (GALACTIC), the Healpix ordering scheme (NESTED), the units (K_cmb or MJy/sr) of each column, and of course the frequency channel (FREQ). Where polarisation Q and U maps are provided, the ''COSMO'' polarisation convention (used in HEALPIX) is adopted, and it is specified in the ''POLCCONV'' keyword (see [[Sky_temperature_maps#Polarization_convention_used_in_the_Planck_project|this section]]. The COMMENT fields give a one-line summary of the product, and some other information useful for traceability within the DPCs. The original filename is also given in the ''FILENAME'' keyword. The ''BAD_DATA'' keyword gives the value used by Healpix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The main parameters are summarised below:
+
|+ '''FITS filenames'''
 
+
|- bgcolor="ffdead"
 
+
! Frequency || Full channel maps
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 
|+ '''Sky map file data structure'''
 
|- bgcolor="ffdead"  
 
!colspan="4" | 1. EXTNAME = 'FREQ-MAP' : Data columns
 
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
 
|-
 
|-
|I_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes I map
+
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal.fits|link=LFI_SkyMap_030_1024_R1.10_nominal.fits}}
 
|-
 
|-
|Q_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes Q map (optional)
+
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal.fits|link=LFI_SkyMap_044_1024_R1.10_nominal.fits}}
 
|-
 
|-
|U_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes U map (optional)
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal.fits|link=LFI_SkyMap_070_1024_R1.10_nominal.fits}}
 
|-
 
|-
|HITS || Int*4 || none || The hit-count map
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal.fits|link=LFI_SkyMap_070_2048_R1.10_nominal.fits}}
 
|-
 
|-
|II_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The II variance map
+
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal.fits|link=HFI_SkyMap_100_2048_R1.10_nominal.fits}}
 
|-
 
|-
|IQ_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The IQ variance map (optional)
+
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal.fits|link=HFI_SkyMap_143_2048_R1.10_nominal.fits}}
 
|-
 
|-
|IU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The IQ variance map (optional)
+
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal.fits|link=HFI_SkyMap_217_2048_R1.10_nominal.fits}}
 
|-
 
|-
|QQ_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The QQ variance map (optional)
+
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal.fits|link=HFI_SkyMap_353_2048_R1.10_nominal.fits}}
 
|-
 
|-
|QU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The QU variance map (optional)
+
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal.fits|link=HFI_SkyMap_545_2048_R1.10_nominal.fits}}
 
|-
 
|-
|UU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The UU variance map (optional)
+
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal.fits|link=HFI_SkyMap_857_2048_R1.10_nominal.fits}}
 +
|- bgcolor="ffdead"
 +
! Frequency || Full channel, Zodi-corrected maps
 
|-
 
|-
|- bgcolor="ffdead" 
+
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits}}
! Keyword || Data Type || Value || Description
 
 
|-
 
|-
|PIXTYPE || string || HEALPIX ||
+
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
|-
|COORDSYS ||  string || GALACTIC ||Coordinate system
+
| '''217GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
|-
|ORDERING || string || NESTED  || Healpix ordering
+
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
|-
|POLCCONV || String || COSMO  || Polarization convention
+
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits}}
 
|-
 
|-
|NSIDE  ||   Int || 1024 or 2048 || Healpix <math>N_{side}</math>
+
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits}}
 +
|- bgcolor="ffdead"
 +
! Frequency || Combined frequency maps
 
|-
 
|-
|FIRSTPIX ||   Int*4 ||                 0 || First pixel number
+
| '''All''' || {{PLASingleFile|fileType=file|name=COM_MapSet_I-allFreqs_R1.10_nominal.fits|link=COM_MapSet_I-allFreqs_R1.10_nominal.fits}}  
|-
 
|LASTPIX ||  Int*4 || 12 <math>N_{side}</math><sup>2</sup> – 1 || Last pixel number
 
|-
 
|FREQ ||    string ||                nnn || The frequency channel 
 
 
|}
 
|}
  
  
The same structure applies to all ''SkyMap'' products, independent of whether they are full channel, survey of half-ring. The distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).
+
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="3" cellspacing="0" width=850px
 
+
|+ '''FITS filenames'''
'''Polarization convention used in the Planck project'''
+
|- bgcolor="ffdead"
 
+
! Frequency || Survey 1 maps || Survey 2 maps
The Planck collaboration used the COSMO convention for the polarization angle (as usually used in space based CMB missions), whereas other astronomical fields usually use the IAU convention. In the following document we report the difference between these two conventions, and the consequence if it is NOT taken into account correctly in the analysis.
+
|-
 
+
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_1.fits|link=LFI_SkyMap_030_1024_R1.10_survey_1.fits}} ||
[[File:conventions.png|thumb|center|400px|'''Figure 1. COSMO convention (left) and IAU convention (right). The versor <math>\hat{z}</math> points outwards the pointing direction in COSMO, and inwards in IAU. The bottom panel refers to the plane tangent to the sphere.''']]
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_2.fits|link=LFI_SkyMap_030_1024_R1.10_survey_2.fits}}
 
+
|-
Changing the orientation convention is equivalent to a transformation <math>\psi'=\pi-\psi</math> of the polarization angle (Figure 1). The consequence of this transformation is the inversion of the Stokes parameter <math>U</math>.
+
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_1.fits|link=LFI_SkyMap_044_1024_R1.10_survey_1.fits}} ||
The components of the polarization tensor in the helicity basis <math>\epsilon^{\pm}=1/\sqrt{2}(\hat{x}\pm i\hat{y})</math> are:
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_2.fits|link=LFI_SkyMap_044_1024_R1.10_survey_2.fits}}
 
+
|-
<math>
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_1.fits|link=LFI_SkyMap_070_1024_R1.10_survey_1.fits}} ||
  (Q+iU)(\hat{n}) = \sum _{\ell m}a_{2,lm}{}_{2}Y_{\ell }^{m}(\hat{n})
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_2.fits|link=LFI_SkyMap_070_1024_R1.10_survey_2.fits}}
  \\(Q-iU)(\hat{n}) = \sum _{\ell m}a_{-2,lm}{}_{2}Y_{\ell }^{m}(\hat{n})
+
|-
</math>
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_1.fits|link=LFI_SkyMap_070_2048_R1.10_survey_1.fits}} ||
 
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_2.fits|link=LFI_SkyMap_070_2048_R1.10_survey_2.fits}}
where  <math>{}_{2}Y_{\ell }^{m}(\hat{n})</math> are the spin weighted spherical harmonic functions.
+
|-
The <math>E</math> and <math>B</math> modes can be defined as:
+
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1.fits}} ||
<math>
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2.fits}}
  E(\hat{n}) = \sum_{\ell m}a_{E,\ell m}Y_{\ell }^{m}(\hat{n})
+
|-
  \\B(\hat{n}) = \sum_{\ell m}a_{B,\ell m}Y_{\ell }^{m}(\hat{n})
+
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1.fits}} ||
</math>
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2.fits}}
 
+
|-
where the coefficients <math>a_{E,\ell m}</math> and <math>a_{B,\ell m}</math> are derived from linear combinations of the <math>a_{2,\ell m}</math> , <math>a_{-2,\ell m}</math> defined implicitly in the first equation (<math>Q\pm iU</math>).
+
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1.fits}} ||
 
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2.fits}}
[[File:test_gradient.jpg|thumb|center|400px|]]
+
|-
[[File:test_curl.jpg|thumb|center|400px|'''Figure 2. Error on Planck-LFI 70 GHz <math>EE</math> (top) and <math>BB</math> (bottom) spectra, in case of wrong choice of the coordinate system convention (IAU instead of COSMO).''']]
+
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1.fits}} ||
 
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2.fits}}
The effect of the sign inversion of <math>U</math> on the polarization spectra is a non trivial mixing of <math>E</math> and <math>B</math> modes.  
+
|-
 
+
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1.fits}} ||
An example of the typical error on <math>EE</math> and <math>BB</math> auto-spectra in case of a wrong choice of the polarization basis is shown in Figure 2.
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2.fits}}
 
+
|-
BE CAREFUL about the polarization convention you are using. If the IAU convention is used in computing the power spectra, the sign of the <math>U</math> component of the Planck maps must be inverted before computing <math>E</math> and <math>B</math> modes.
+
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1.fits}} ||
 
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2.fits}}
''' Note on the convention used by the Planck Catalogue of Compact Sources (PCCS) '''
+
|- bgcolor="ffdead"
For continuity with other compact sources catolgues, the Catalogue of Compact Sources provided by Planck follows the IAU convention, and the polarization angles are defined on an interval of [-90&deg;,90&deg;]. To switch to the COSMO convention, the polarization angles listed in the catalogue have to be shifted by 90&deg; and multiplied by -1.
+
! Frequency || Survey 1 Zodi-corrected maps || Survey 2 Zodi-corrected maps
 
+
|-
== References ==
+
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
<References />
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
+
|-
</div>
+
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
</div>
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
+
|-
<div class="toccolours mw-collapsible mw-collapsed" style="background-color: #EEE8AA;width:80%" >
+
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
'''2013 Sky temperature maps'''
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
+
|-
<div class="mw-collapsible-content">
+
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits}}
==General description==
+
|-
 
+
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits}}
Sky maps give the best estimate of the intensity of the signal from the sky after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system. Sky maps are provided for the nominal Planck mission and also, separately, for the first two single surveys, the third one being covered only for a small part during the nominal mission.The details of the start and end times of each are given in [[HFIpreprocessingstatics | this table]].   As a secondary product, maps with estimates of the Zodiacal light and Far-Side-Lobes contribution removed are also provided.
+
|-
 
+
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
For characterization purposes, are also provided maps covering the nominal survey but each one using only half of the available data.  These are the ''ringhalf_{1|2}'' maps, which are built using the first and second half of the stable pointing part in each pointing period. These maps are used extensively to investigate the (high frequency) noise properties the maps themselves and of other products described elsewhere (see e.g., the [[HFI-Validation | data validation]] section).
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
+
|- bgcolor="ffdead"
To help in further processing, there are also masks of the Galactic Plane and of point sources, each provided for several different depths.
+
! Frequency ||  Half-ring 1 maps ||Half-ring 2 maps
 
+
|-
All sky maps are in Healpix format, with Nside of 2048 for HFI and of 1024 for LFI (note that the LFI 70 GHz has been delivered also at Nside of 2048 to be directly comparable with HFI maps), in Galactic coordinates, and Nested ordering. The signal is given in units of K<sub>cmb</sub> for 30-353 GHz, and of MJy/sr (for a constant $\nu F_\nu$ energy distribution ) for 545 and 857 GHz.  Each sky map is packaged into a ''BINTABLE'' extension of a FITS file together with a hit-count map (or hit map, for short, giving the number of observation samples that are cumulated in a pixel, all detectors combined) and a variance map (determined from the half-ring maps), and additional information is given in the FITS file header. The structure of the FITS file is given in the [[#Format | FITS file structure]] section below.
+
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits}} ||
 
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits}}
===Types of maps ===
+
|-
 
+
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits}} ||
; Full channel maps
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits}}
: Full channel maps are built using all the valid detectors of a frequency channel and cover the nominal mission.  For HFI, the 143-8 and 545-3 bolometers are rejected entirely as they are seriously affected by RTS noise. The maps are displayed in the figures below. The range is the same from 30 - 143 GHz in order to show the CMB at the same level. At higher frequencies the range is increased in order to keep the Galactic Plane from invading the whole sky.
+
|-
 
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits}} ||
<center>
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits}}
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>
+
|-
File: SkyMap30.png| '''Nominal mission, 30 GHz'''
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits}} ||
File: SkyMap44.png | '''Nominal mission, 44 GHz'''
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits}}
File: SkyMap70.png | '''Nominal mission, 70 GHz'''
+
|-
File: SkyMap100.png | '''Nominal mission, 100 GHz'''
+
| '''100GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits}} ||
File: SkyMap143.png | '''Nominal mission, 143 GHz'''
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits}}
File: SkyMap217.png | '''Nominal mission, 217 GHz'''
+
|-
File: SkyMap353.png | '''Nominal mission, 353 GHz'''
+
| '''143GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits}} ||
File: SkyMap545.png | '''Nominal mission, 545 GHz'''
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits}}
File: SkyMap857.png | '''Nominal mission, 857 GHz'''
+
|-
</gallery>
+
| '''217GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits}} ||
</center>
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits}}
 +
|-
 +
| '''353GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits}}
 +
|-
 +
| '''545GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits}}
 +
|-
 +
| '''857GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits}}
 +
|}
 +
--->
  
; Single survey maps
+
''' FITS file structure '''
: Single survey maps are built using all valid detectors of a frequency channel; they cover separately the different sky surveys.  The surveys are defined as the times over which the satellite spin axis rotates but 180 degrees, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between ~80 and 90% depending on detector position.
 
  
; Detector set or detector pairs maps
+
The FITS files for the sky maps contain a minimal primary header with no data, and a ''BINTABLE'' extension (EXTENSION 1, EXTNAME = ''FREQ-MAP'') containing the data.   The structure is shows schematically in the figure below.   The ''FREQ-MAP'' extension contains a 3- or a 10-column table that contain the signal, hit-count and variance maps, all in Healpix formatThe 3-column case is for intensity only maps, the 10-column case is for polarisation. The number of rows is the number of map pixels, which is Npix = 12 <math>N_{side}</math><sup>2</sup> for Healpix maps, where <math>N_{side}</math> = 1024 or 2048 for most the maps presented in this chapter.
: These are maps built from a subset of the detectors in a frequency channel, typically our of two PSB pairs (i.e., four poloarisation-sensitive bolometers with different orientation on the sky), for HFI in order to extract a single temperature mapWhile none of these maps are part of the first Planck data release, the concept of ''detset'' is used, and thus it is worth mentioning it here. In particular, information by detector set is available at the [[Frequency_maps_angular_power_spectra | sky power spectrum]] level and in the [[The RIMO | RIMO]].
 
  
; Half-ring maps
+
[[File:FITS_FreqMap.png | 550px | center | thumb | '''FITS file structure''']]
: Half-ring maps are built using only the first or the second half of the stable pointing period dataThere are thus two half-ring maps per frequency channel named ''ringhalf_1'' and ''ringhalf_2'' respectively.  These maps are built for characterization purposes in order to perform null tests. In particular, the difference between the two half-ring maps at a given frequency give a good estimate of the high frequency noise in the data (albeit biased low by ~0.5% for the HFI channels due to specifics of the TOI processing).
 
  
; Masks
+
Note that file sizes are ~0.6 GB for I-only maps and ~1.9 GB for I,Q,U maps at <math>N_{side}</math> 2048 and ~0.14 GB for I-only maps and ~0.45 GB for I,Q,U maps at <math>N_{side}</math> 1024 .
: Masks are provided of the Galactic Plane and of the point sources. For the Galactic Plane, eight masks are given covering different fractions of the sky, and for the points sources two masks are given, at the 5 and 10 sigma level, for each Planck HFI frequency channel. These are generic masks, specific masks applicable to other products are delivered with the products themselves.
 
  
=== Caveats and known issues ===
+
Keywords indicate the coordinate system (GALACTIC), the Healpix ordering scheme (NESTED), the units (K_cmb or MJy/sr) of each column, and of course the frequency channel (FREQ). Where polarisation Q and U maps are provided, the ''COSMO'' polarisation convention (used in HEALPIX) is adopted, and it is specified in the ''POLCCONV'' keyword (see [[Sky_temperature_maps#Polarization_convention_used_in_the_Planck_project|this section]]. The COMMENT fields give a one-line summary of the product, and some other information useful for traceability within the DPCs. The original filename is also given in the ''FILENAME'' keyword. The ''BAD_DATA'' keyword gives the value used by Healpix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The main parameters are summarised below:
  
The primary limitation of the HFI maps are
 
* the absence of correction of the ADC non-linearities,
 
* the far-side lobe contribution is not accounted for in the processing and in the calibration,
 
* the dipole removal is based on the non-relativistic approximation which leaves a weak quadrupole component in the map.
 
And thus the overall calibration accuracy is at the 0.2% level in 100-217 GHz channels
 
  
The LFI 70 GHz maps at Nside=2048 should be considered as additional product, the default are the LFI maps at Nside=1024. No effective beam at Nside=2048 is provided, only at Nside=1024, for this reason the use of the effective beam with maps at Nside 2048 is discouraged.
+
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 
+
|+ '''Sky map file data structure'''
==== Map zero-level ====
+
|- bgcolor="ffdead" 
 
+
!colspan="4" | 1. EXTNAME = 'FREQ-MAP' : Data columns
For the  100 to 857 GHz maps, the zero levels are set to their optimal levels for Galactic and CIB studies.  A procedure for adjusting them to astrophysical values is given in the HFI Calibration paper {{PlanckPapers|planck2013-p03b}}.
+
|- bgcolor="ffdead" 
 
+
! Column Name || Data Type || Units || Description
For the 30, 44 and 70 GHz, maps are corrected for zero level monopole by applying an offset correction, see LFI Calibration paper {{PlanckPapers|planck2013-p02b}} section 3.4 "Setting the zero levels in the maps". Note that the offset applied is indicated in the header as a comment keyword.
+
|-
 
+
|I_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes I map
==== The Zodiacal light and the Far-Side Lobes ====
+
|-
 
+
|Q_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes Q map (optional)
The figures below show the modeled Zodiacal light and Far Side Lobes projected onto the maps; they are simply the difference between the ''main product'' and the ''ZodiCorrected'' maps for the nominal mission.  The units are given in the figures.  The ''heat'' color table has been used in place of the standard Planck for clarity reasons. 
+
|-
<center>
+
|U_STOKES || Real*4 || K_cmb or MJy/sr || The Stokes U map (optional)
<gallery perrow=3 widths=260px heights=170px>
+
|-
File: ZodiRes100.png | '''zodi/FSL rediduals - 100 GHz'''
+
|HITS || Int*4 || none || The hit-count map
File: ZodiRes143.png | '''zodi/FSL rediduals - 143 GHz'''
+
|-
File: ZodiRes217.png | '''zodi/FSL rediduals - 217 GHz'''
+
|II_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The II variance map
File: ZodiRes353.png | '''zodi/FSL rediduals - 353 GHz'''
+
|-
File: ZodiRes545.png | '''zodi/FSL rediduals - 545 GHz'''
+
|IQ_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The IQ variance map (optional)
File: ZodiRes857.png | '''zodi/FSL rediduals - 857 GHz'''
+
|-
</gallery>
+
|IU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The IQ variance map (optional)
</center>
+
|-
The effects of the FSLs are seen most clearly at the highest frequencies, as structures roughly symmetric about the center of the image, which corresponds to the location of the Galactic Centre, which is in turn the source of most of the radiation that is scattered into the FSLs.
+
|QQ_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The QQ variance map (optional)
 
+
|-
==== Artifacts near caustics of the scanning strategy ====
+
|QU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The QU variance map (optional)
 +
|-
 +
|UU_COV || Real*4 || K_cmb<sup>2</sup> or (MJy/sr)<sup>2</sup> || The UU variance map (optional)
 +
|-
 +
|- bgcolor="ffdead" 
 +
! Keyword || Data Type || Value || Description
 +
|-
 +
|PIXTYPE ||  string || HEALPIX ||
 +
|-
 +
|COORDSYS ||  string || GALACTIC ||Coordinate system
 +
|-
 +
|ORDERING || string || NESTED  || Healpix ordering
 +
|-
 +
|POLCCONV || String || COSMO  || Polarization convention
 +
|-
 +
|NSIDE  ||  Int || 1024 or 2048 || Healpix <math>N_{side}</math>
 +
|-
 +
|FIRSTPIX ||  Int*4 ||                  0 || First pixel number
 +
|-
 +
|LASTPIX ||  Int*4 || 12 <math>N_{side}</math><sup>2</sup> – 1 || Last pixel number
 +
|-
 +
|FREQ ||    string ||                nnn || The frequency channel 
 +
|}
  
The [[Survey scanning and performance|scanning strategy]] is such that regions around the Ecliptic poles are surveyed very deeply and compared to the average, and the transition from the nominal depth to the high depth, as shows on hit-count maps is very rapid, namely a few pixels, for a contrast of ~30.  These transitions, or caustics in the maps, occur at different positions on the sky for different detectors, as the positions depend on their location in the focal plane of the instrument.  As a result, when data from different detectors are combined to build a full channel map, the the weights of different detectors in the mix changes rapidly across the caustic, and given the remaining errors in the relative calibration of the detectors, a visible effect can be introduced in the maps, especially when the SNR is very high, i.e. at the highest frequencies and near bright regions like the Galactic Plane.  Some examples are shown below.
 
  
<center>
+
The same structure applies to all ''SkyMap'' products, independent of whether they are full channel, survey of half-ringThe distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).
<gallery perrow=3 heights=260px  widths=260pix >
 
File: causta857.png | '''857 GHz intensity map around (272.5, -27)'''
 
File: caustb857.png | '''857 GHz intensity map around (264.5, -37.5)'''
 
File: caustc857.png | '''857 GHz intensity map around (98.5, 43)'''
 
File: hita857.png  | '''857 GHz hit count map around (272.5, -27)'''
 
File: hitb857.png | '''857 GHz hit count map around (264.5, -37.5)'''
 
File: hitc857.png  | '''857 GHz hit count map around (98.5, 43)'''
 
</gallery>
 
</center>
 
  
==Production process==
+
'''Polarization convention used in the Planck project'''
  
 +
The Planck collaboration used the COSMO convention for the polarization angle (as usually used in space based CMB missions), whereas other astronomical fields usually use the IAU convention. In the following document we report the difference between these two conventions, and the consequence if it is NOT taken into account correctly in the analysis.
  
Sky maps are produced by combining appropriately the data of all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarised) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system. In particular, they include the Zodiacal light emission (Zodi for short) and also the scattering from the far-side lobes of the beams (FSL).  More on this below.
+
[[File:conventions.png|thumb|center|400px|'''Figure 1. COSMO convention (left) and IAU convention (right). The versor <math>\hat{z}</math> points outwards the pointing direction in COSMO, and inwards in IAU. The bottom panel refers to the plane tangent to the sphere.''']]
  
=== HFI processing ===
+
Changing the orientation convention is equivalent to a transformation <math>\psi'=\pi-\psi</math> of the polarization angle (Figure 1). The consequence of this transformation is the inversion of the Stokes parameter <math>U</math>.
 +
The components of the polarization tensor in the helicity basis <math>\epsilon^{\pm}=1/\sqrt{2}(\hat{x}\pm i\hat{y})</math> are:
  
The inputs to the mapmaking are TOIs of signal that have been cleaned (as far as possible) of instrumental effects and calibrated in absorbed watts. While the processing involved is described in detail in the [[TOI processing|TOI processing]] section, we give a very brief summary here for convenience. That pipeline performs the following operations:
+
<math>
 +
  (Q+iU)(\hat{n}) = \sum _{\ell m}a_{2,lm}{}_{2}Y_{\ell }^{m}(\hat{n})
 +
  \\(Q-iU)(\hat{n}) = \sum _{\ell m}a_{-2,lm}{}_{2}Y_{\ell }^{m}(\hat{n})
 +
</math>
  
; demodulation: this is performed around a variable level which is determined from the valid input data (a validity flag from a previous version of the processing is used for this purpose), and the data are converted to engineering units (V) using known conversion coefficients.
+
where  <math>{}_{2}Y_{\ell }^{m}(\hat{n})</math> are the spin weighted spherical harmonic functions.
; despiking: using the demodulated data converted to V (by the transfer function) the glitches are identified and fitted with templates.  A glitch flag is produced that identifies the strongest part of the glitches, and a timeline of glitch tails is produced from the template fits, and subtracted from the demodulated timeline from step 1.  Finally, the flagged ranges are replaced with data from an average over the pointing period (TBC)
+
The <math>E</math> and <math>B</math> modes can be defined as:
; dark template removal: the two dark bolometers are demodulated and despiked as above; the resulting timelines are then smoothed and used as an indicator of the overall temperature variations of the bolometer plate.  Where the variations are consistent with each other, they are combined and removed from the bolometer signal timelines using appropriate coupling coefficients.  The few percent of the data where they are not consistent are flagged on the timelines.
+
<math>
; conversion to absorbed power: the timeline is converted to watts of absorbed power using the bolometer function.  This includes a non-linearity correction; removal of the 4K cooler lines: the electromagnetic interference of the 4K cooler with the bolometer readout wires induces some sharp lines in the signal power spectra at frequencies of the 4K cooler's fundamental and its multiples, folded by the signal modulations.  Fourier coefficients of the relevant lines are determined on a per-ring basis, and then removed from the data. The quality of the removal depends on the bolometer.
+
  E(\hat{n}) = \sum_{\ell m}a_{E,\ell m}Y_{\ell }^{m}(\hat{n})
; deconvolution by the time transfer function: this is done to correct for the non-instantaneous time response of the bolometers. The function itself is modeled using 4 parameters which are adjusted primarily on the planet data and also from comparisons of the  northward and southward scans of the Galactic Plane.  It is then removed using Fourier techniques, which has the side-effect of increasing the noise at high frequencies.
+
  \\B(\hat{n}) = \sum_{\ell m}a_{B,\ell m}Y_{\ell }^{m}(\hat{n})
; jump correction: removes some (relatively rare: 0.3 jumps per bolometer per pointing period, on average) jumps in the signal baseline.  The jumps are detected characterized on smoothed TOIs, and corrected by adding a constant to part of the signal timeline. The origin of the jumps is not known.
+
</math>
  
The results of this processing are a timeline of signal (in absorbed watts) and a ''valid data'' flag timeline for each of the 50 valid bolometers processed; these timelines contain the full sky signal, i.e., including the solar and orbital dipoles, the Zodiacal light, and contributions from the Far-Side lobes. The dipoles are necessary for the flux calibration and are removed at the mapmaking stage.  The remaining two bolometers (143-8 and 535-3) show semi-random jumps in the signal level, typically jumping over 2-5 different ''pseudo-baseline'' levels, a behavior known as ''Random Telegraphic Signal'', so that these are commonly called the RTS bolometers.  Finally, ring-level statistics of different types (mean, median, rms, kurtosis, etc.) are determined on a per-ring basis for all timelines, and a selection based on these statistics is used to discard anomalous rings, which are recorded in a ring-level flag for each valid bolometer timeline (see the [[TOI_processing#Discarded_rings| Discarded rings]] section).
+
where the coefficients <math>a_{E,\ell m}</math> and <math>a_{B,\ell m}</math> are derived from linear combinations of the <math>a_{2,\ell m}</math> , <math>a_{-2,\ell m}</math> defined implicitly in the first equation (<math>Q\pm iU</math>).
  
Throughout this processing, bright planets (Mars, Jupiter, Saturn, Uranus) and bright asteroids are masked in the timeline in order to avoid ringing effects in the processing.  Since they move on the sky, the portion of the sky masked during one survey is observed during one, and no hole is left in the final map.  In parallel, the planet data are processed in a similar way, but with different parameters for the despiking step, and without the final jump correction step.  These results are processed separately to determine the beam shapes and the focal plane geometry.
+
[[File:test_gradient.jpg|thumb|center|400px|]]
 +
[[File:test_curl.jpg|thumb|center|400px|'''Figure 2. Error on Planck-LFI 70 GHz <math>EE</math> (top) and <math>BB</math> (bottom) spectra, in case of wrong choice of the coordinate system convention (IAU instead of COSMO).''']]
  
The pointing is determined starting from the AHF produced by MOC, which gives the direction and orientation of the LOS of a fiducial position in the focal plane at frequencies of 8Hz during stable pointing and 4 Hz during maneuvers (TBC for details, reference).  This is interpolated to the times of data observation (ref to method), corrected for the wobble and other time-dependent offsets determined from the observed positions of a large number of sources around the sky, and finally converted to the LOS of each detector using the quaternions in the IMO (which are determined from observations of bright planets - see the [[Detector_pointing]] section).  
+
The effect of the sign inversion of <math>U</math> on the polarization spectra is a non trivial mixing of <math>E</math> and <math>B</math> modes.  
  
The mapmaking and calibration process is described in detail in the [[Map-making_LFI | Map-making]] section, where detailed references are found. In brief it consists of:
+
An example of the typical error on <math>EE</math> and <math>BB</math> auto-spectra in case of a wrong choice of the polarization basis is shown in Figure 2.
  
; binning the TOI data onto ''rings'' : Healpix rings (HPRs) are used here, each ring containing the combined data of one pointing period.  
+
BE CAREFUL about the polarization convention you are using. If the IAU convention is used in computing the power spectra, the sign of the <math>U</math> component of the Planck maps must be inverted before computing <math>E</math> and <math>B</math> modes.
; flux calibration : at 100-353 GHz, the flux calibration factors are determined for each pointing period (or ring) from the solar-motion dipole, using the WMAP dipole as the reference, and after removal of the dipole signal induced by the motion of the Planck satellite in the solar system.  This gain by ring is smoothed with a window of width 50 rings, which reveals an apparent variation of ~1-2% on a scale of 100s to 1000s of rings for the 100-217 GHz channels, and is applied.  At 353GHz, where the solar motion dipole is weaker compared to the signal, no gain variation is detected (within the uncertainties), and a single fixed gain is applied to all rings.  At 545 and 857 GHz the gain is determined from the observation of Uranus and Neptune (but not Jupiter which is too bright) and comparison to recent models made explicitly for this mission.  A single gain is applied to all rings at these frequencies.
 
; destriping : in order to remove low-frequency noise, an offset per ring is determined by minimizing the differences between HPRs at their crossings, and removed.
 
; projection onto the map : the offset-corrected and flux-calibrated HPRs are projected onto Healpix maps, with the data of each bolometer weighted by a factor of 1/NET of that bolometer, and accounting for the slight different band transmission profiles of the bolometers in each band.  
 
  
These maps provide the main mission products.  A second, reduced, set of maps, cleaned of the Zodiacal emission of the FSL leakage is also produced for the nominal mission and the two single surveys, but not for the half-rings (since the contribution would be the same for the two halves of each ring)For this purpose, the the Zodiacal emission and the FSL contamination, which are not fixed on the sky, are modeled separately at HPR-level, and subtracted from the signal HPR before projecting them onto the maps.  
+
''' Note on the convention used by the Planck Catalogue of Compact Sources (PCCS) '''
 +
For continuity with other compact sources catolgues, the Catalogue of Compact Sources provided by Planck follows the IAU convention, and the polarization angles are defined on an interval of [-90&deg;,90&deg;]. To switch to the COSMO convention, the polarization angles listed in the catalogue have to be shifted by 90&deg; and multiplied by -1.
  
Together with signal maps, hit count and variance maps are also produced. The hit maps give the (integer) number of valid TOI-level samples that contribute to the signal of each pixel. All valid samples are counted in the same way, i.e., there is no weighting factor applied.  The variance maps project the white noise estimate, provided by the NETs, in the sky domain.
+
== References ==
 +
<References />
  
=== LFI processing ===
+
</div>
 +
</div>
  
LFI maps were constructed with the Madam map-making code, version 3.7.4. The code is based on generalized destriping technique, where the correlated noise component is modeled as a sequence of constant offset,  called baselines. A noise filter was used to constrain the baseline solution allowing the use of 1 second baselines.
+
<div class="toccolours mw-collapsible mw-collapsed" style="background-color: #EEE8AA;width:80%" >
 +
'''2013 Sky temperature maps'''
  
Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The used weights are listed in [[Map-making LFI#Map-making|Map-making]]. The flagged samples were excluded from the analysis by setting their weights to $C_{w}^{-1}$ = 0. The galaxy region was masked out in the destriping phase, to reduce error arising from strong signal gradients. The polarization component was included in the analysis, although only the temperature maps are released.
+
<div class="mw-collapsible-content">
  
A detailed description of the map-making procedure is given in {{PlanckPapers|planck2013-p02}} and in section [[Map-making LFI#Map-making|Map-making]].
+
'''General description'''
  
==Inputs==
 
  
 +
Sky maps give the best estimate of the intensity of the signal from the sky after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system.  Sky maps are provided for the nominal Planck mission and also, separately, for the first two single surveys, the third one being covered only for a small part during the nominal mission.The details of the start and end times of each are given in [[HFIpreprocessingstatics | this table]].  As a secondary product, maps with estimates of the Zodiacal light and Far-Side-Lobes contribution removed are also provided. 
  
=== HFI inputs ===
+
For characterization purposes, are also provided maps covering the nominal survey but each one using only half of the available data.  These are the ''ringhalf_{1|2}'' maps, which are built using the first and second half of the stable pointing part in each pointing period. These maps are used extensively to investigate the (high frequency) noise properties the maps themselves and of other products described elsewhere (see e.g., the [[HFI-Validation | data validation]] section).
  
* The cleaned TOIs of signal of each detector, together with their flags, produced by the [[TOI processing|TOI processing]] pipeline
+
To help in further processing, there are also masks of the Galactic Plane and of point sources, each provided for several different depths.
* The TOIs of pointing (quaternions), described in [[Detector_pointing]]
 
* Bolometer-level characterization data, from the DPC's internal IMO (not distributed)
 
* Planck orbit data used to compute and remove the earth dipole
 
* WMAP solar dipole information used to calibrate the CMB channels
 
* Planet models used to calibrate the Galactic channels.
 
  
=== LFI inputs ===
+
All sky maps are in Healpix format, with Nside of 2048 for HFI and of 1024 for LFI (note that the LFI 70 GHz has been delivered also at Nside of 2048 to be directly comparable with HFI maps), in Galactic coordinates, and Nested ordering. The signal is given in units of K<sub>cmb</sub> for 30-353 GHz, and of MJy/sr (for a constant $\nu F_\nu$ energy distribution ) for 545 and 857 GHz.  Each sky map is packaged into a ''BINTABLE'' extension of a FITS file together with a hit-count map (or hit map, for short, giving the number of observation samples that are cumulated in a pixel, all detectors combined) and a variance map (determined from the half-ring maps), and additional information is given in the FITS file header.  The structure of the FITS file is given in the [[#Format | FITS file structure]] section below.
  
The Madam map-maker takes as an input:
 
  
* The calibrated timelines (for details see [[TOI processing LFI|TOI Processing]])
+
'''Types of maps '''
* The detector pointings (for details see [[Detector pointing|Detector pointing]])
 
* The noise information in the form of three-parameter (white noise level ($\sigma$), slope, and knee frequency ($f_\mathrm{knee}$)) noise model (for details see  [[The RIMO|RIMO]])
 
  
==Related products==
+
; Full channel maps
 +
: Full channel maps are built using all the valid detectors of a frequency channel and cover the nominal mission.  For HFI, the 143-8 and 545-3 bolometers are rejected entirely as they are seriously affected by RTS noise.  The maps are displayed in the figures below.  The range is the same from 30 - 143 GHz in order to show the CMB at the same level.  At higher frequencies the range is increased in order to keep the Galactic Plane from invading the whole sky.
  
 +
<center>
 +
<gallery style="padding:0 0 0 0;" perrow=3 widths=260px heights=160px>
 +
File: SkyMap30.png| '''Nominal mission, 30 GHz'''
 +
File: SkyMap44.png | '''Nominal mission, 44 GHz'''
 +
File: SkyMap70.png | '''Nominal mission, 70 GHz'''
 +
File: SkyMap100.png | '''Nominal mission, 100 GHz'''
 +
File: SkyMap143.png | '''Nominal mission, 143 GHz'''
 +
File: SkyMap217.png | '''Nominal mission, 217 GHz'''
 +
File: SkyMap353.png | '''Nominal mission, 353 GHz'''
 +
File: SkyMap545.png | '''Nominal mission, 545 GHz'''
 +
File: SkyMap857.png | '''Nominal mission, 857 GHz'''
 +
</gallery>
 +
</center>
  
=== Masks ===
+
; Single survey maps
 +
: Single survey maps are built using all valid detectors of a frequency channel; they cover separately the different sky surveys.  The surveys are defined as the times over which the satellite spin axis rotates but 180 degrees, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between ~80 and 90% depending on detector position.
  
Masks are provided of
+
; Detector set or detector pairs maps
 +
: These are maps built from a subset of the detectors in a frequency channel, typically our of two PSB pairs (i.e., four poloarisation-sensitive bolometers with different orientation on the sky), for HFI in order to extract a single temperature map.  While none of these maps are part of the first Planck data release, the concept of ''detset'' is used, and thus it is worth mentioning it here. In particular, information by detector set is available at the [[Frequency_maps_angular_power_spectra | sky power spectrum]] level and in the [[The RIMO | RIMO]].
 +
 
 +
; Half-ring maps
 +
: Half-ring maps are built using only the first or the second half of the stable pointing period data.  There are thus two half-ring maps per frequency channel named ''ringhalf_1'' and ''ringhalf_2'' respectively.  These maps are built for characterization purposes in order to perform null tests. In particular, the difference between the two half-ring maps at a given frequency give a good estimate of the high frequency noise in the data (albeit biased low by ~0.5% for the HFI channels due to specifics of the TOI processing).
 +
 
 +
; Masks
 +
: Masks are provided of the Galactic Plane and of the point sources.  For the Galactic Plane, eight masks are given covering different fractions of the sky, and for the points sources two masks are given, at the 5 and 10 sigma level, for each Planck HFI frequency channel. These are generic masks, specific masks applicable to other products are delivered with the products themselves.
 +
 
 +
''' Caveats and known issues'''
  
; the point sources
+
The primary limitation of the HFI maps are
: 15 masks are provided, three for the LFI (one mask for each frequency masking at the 4<math>\sigma</math> level) and 12 for the HFI (two masks for each frequency at the 5 and 10<math>\sigma</math> levels. For the HFI the masks can be used as they are, for the LFI they need to be downgraded to Nside=1024 except for the 70 GHz channel at Nside=2048 which does not need to be downgraded.
+
* the absence of correction of the ADC non-linearities,
 +
* the far-side lobe contribution is not accounted for in the processing and in the calibration,
 +
* the dipole removal is based on the non-relativistic approximation which leaves a weak quadrupole component in the map.
 +
And thus the overall calibration accuracy is at the 0.2% level in 100-217 GHz channels
  
; the Galactic Plane
+
The LFI 70 GHz maps at Nside=2048 should be considered as additional product, the default are the LFI maps at Nside=1024. No effective beam at Nside=2048 is provided, only at Nside=1024, for this reason the use of the effective beam with maps at Nside 2048 is discouraged.
: 8 masks are provided giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage in two different files, at Nside=2048. For the HFI they can be used as they are, for the LFI they need to be downgraded at Nside=1024 (note that if using the 70 GHZ at Nside=2048 no downgraded is needed)
 
  
 +
''' Map zero-level '''
  
The masks are binary, in GALACTIC coordinates, and NESTED ordering. The table below give the filenames.
+
For the  100 to 857 GHz maps, the zero levels are set to their optimal levels for Galactic and CIB studies. A procedure for adjusting them to astrophysical values is given in the HFI Calibration paper {{PlanckPapers|planck2013-p03b}}.
  
 +
For the 30, 44 and 70 GHz, maps are corrected for zero level monopole by applying an offset correction, see LFI Calibration paper {{PlanckPapers|planck2013-p02b}} section 3.4 "Setting the zero levels in the maps". Note that the offset applied is indicated in the header as a comment keyword.
  
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="5" cellspacing="0"
+
''' The Zodiacal light and the Far-Side Lobes '''
|+ '''FITS filenames for masks'''
 
|-bgcolor="ffdead"
 
! Frequency || LFI Point Source masks
 
|-
 
| '''30GHz'''  || {{PLASingleFile|fileType=map|name=LFI_MASK_030-ps_2048_R1.00.fits|link=LFI_MASK_030-ps_2048_R1.00.fits}}
 
|-
 
| '''44GHz'''  || {{PLASingleFile|fileType=map|name=LFI_MASK_044-ps_2048_R1.00.fits|link=LFI_MASK_044-ps_2048_R1.00.fits}}
 
|-
 
| '''70GHz'''  || {{PLASingleFile|fileType=map|name=LFI_MASK_070-ps_2048_R1.00.fits|link=LFI_MASK_070-ps_2048_R1.00.fits}}
 
|- bgcolor="ffdead"
 
! colspan="2" | HFI Point Source masks
 
|-
 
| colspan="2" | {{PLASingleFile|fileType=map|name=HFI_Mask_PointSrc_2048_R1.10.fits|link=HFI_Mask_PointSrc_2048_R1.10.fits}}
 
|- bgcolor="ffdead"
 
! colspan="2" | Galactic Plane masks
 
|-
 
| colspan="2" | {{PLASingleFile|fileType=map|name=HFI_Mask_GalPlane_2048_R1.10.fits|link=HFI_Mask_GalPlane_2048_R1.10.fits}}
 
|}
 
 
 
 
 
The masks are shows below in a single figure.  While this is quite clear for the Galactic Plane masks, it is less so for the point source masks, but it does give a clear perspective on how the latter are distributed over the sky.
 
  
 +
The figures below show the modeled Zodiacal light and Far Side Lobes projected onto the maps; they are simply the difference between the ''main product'' and the ''ZodiCorrected'' maps for the nominal mission.  The units are given in the figures.  The ''heat'' color table has been used in place of the standard Planck for clarity reasons. 
 
<center>
 
<center>
<gallery perrow=2 widths=300px heights=185px >
+
<gallery perrow=3 widths=260px heights=170px>
File: HFI_GalPlaneMask.png | '''Galactic Plane masks'''
+
File: ZodiRes100.png | '''zodi/FSL rediduals - 100 GHz'''
File: HFI_PointSrcMask.png | '''PointSource masks'''
+
File: ZodiRes143.png | '''zodi/FSL rediduals - 143 GHz'''
 +
File: ZodiRes217.png | '''zodi/FSL rediduals - 217 GHz'''
 +
File: ZodiRes353.png | '''zodi/FSL rediduals - 353 GHz'''
 +
File: ZodiRes545.png | '''zodi/FSL rediduals - 545 GHz'''
 +
File: ZodiRes857.png | '''zodi/FSL rediduals - 857 GHz'''
 
</gallery>
 
</gallery>
 
</center>
 
</center>
 +
The effects of the FSLs are seen most clearly at the highest frequencies, as structures roughly symmetric about the center of the image, which corresponds to the location of the Galactic Centre, which is in turn the source of most of the radiation that is scattered into the FSLs.
  
== File names ==
+
''' Artifacts near caustics of the scanning strategy '''
 +
 
 +
The [[Survey scanning and performance|scanning strategy]] is such that regions around the Ecliptic poles are surveyed very deeply and compared to the average, and the transition from the nominal depth to the high depth, as shows on hit-count maps is very rapid, namely a few pixels, for a contrast of ~30.  These transitions, or caustics in the maps, occur at different positions on the sky for different detectors, as the positions depend on their location in the focal plane of the instrument.  As a result, when data from different detectors are combined to build a full channel map, the the weights of different detectors in the mix changes rapidly across the caustic, and given the remaining errors in the relative calibration of the detectors, a visible effect can be introduced in the maps, especially when the SNR is very high, i.e. at the highest frequencies and near bright regions like the Galactic Plane.  Some examples are shown below.
 +
 
 +
<center>
 +
<gallery perrow=3 heights=260px  widths=260pix >
 +
File: causta857.png | '''857 GHz intensity map around (272.5, -27)'''
 +
File: caustb857.png | '''857 GHz intensity map around (264.5, -37.5)'''
 +
File: caustc857.png | '''857 GHz intensity map around (98.5, 43)'''
 +
File: hita857.png  | '''857 GHz hit count map around (272.5, -27)'''
 +
File: hitb857.png  | '''857 GHz hit count map around (264.5, -37.5)'''
 +
File: hitc857.png  | '''857 GHz hit count map around (98.5, 43)'''
 +
</gallery>
 +
</center>
  
 +
'''Production process'''
  
The FITS filenames are of the form ''{H|L}FI_SkyMap_fff_nnnn_R1.nn_{coverage}_{type}.fits'', where ''fff'' are three digits to indicate the Planck frequency band, and ''nnnn'' is the Healpix Nside of the map, ''coverage'' indicates which part of the mission is covered, and the optional ''type'' indicates the subset of input data used.  A full list of products, with links to them in the Archive, is given in the tables below.
 
  
For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the 9 frequency maps as separate columns in a single extension. The 9 columns in this file contain the intensity maps ONLY and no other information (hit maps and variance maps) is provided.
+
Sky maps are produced by combining appropriately the data of all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarised) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system.  In particular, they include the Zodiacal light emission (Zodi for short) and also the scattering from the far-side lobes of the beams (FSL).  More on this below.
  
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="5" cellspacing="0"  width=500px
+
''' HFI processing '''
|+ '''FITS filenames'''
+
 
|- bgcolor="ffdead"
+
The inputs to the mapmaking are TOIs of signal that have been cleaned (as far as possible) of instrumental effects and calibrated in absorbed watts. While the processing involved is described in detail in the [[TOI processing|TOI processing]] section, we give a very brief summary here for convenience. That pipeline performs the following operations:
! Frequency || Full channel maps
+
 
 +
; demodulation: this is performed around a variable level which is determined from the valid input data (a validity flag from a previous version of the processing is used for this purpose), and the data are converted to engineering units (V) using known conversion coefficients.
 +
; despiking: using the demodulated data converted to V (by the transfer function) the glitches are identified and fitted with templates.  A glitch flag is produced that identifies the strongest part of the glitches, and a timeline of glitch tails is produced from the template fits, and subtracted from the demodulated timeline from step 1.  Finally, the flagged ranges are replaced with data from an average over the pointing period (TBC)
 +
; dark template removal: the two dark bolometers are demodulated and despiked as above; the resulting timelines are then smoothed and used as an indicator of the overall temperature variations of the bolometer plate.  Where the variations are consistent with each other, they are combined and removed from the bolometer signal timelines using appropriate coupling coefficients.  The few percent of the data where they are not consistent are flagged on the timelines.
 +
; conversion to absorbed power: the timeline is converted to watts of absorbed power using the bolometer function.  This includes a non-linearity correction; removal of the 4K cooler lines: the electromagnetic interference of the 4K cooler with the bolometer readout wires induces some sharp lines in the signal power spectra at frequencies of the 4K cooler's fundamental and its multiples, folded by the signal modulations.  Fourier coefficients of the relevant lines are determined on a per-ring basis, and then removed from the data. The quality of the removal depends on the bolometer.
 +
; deconvolution by the time transfer function: this is done to correct for the non-instantaneous time response of the bolometers. The function itself is modeled using 4 parameters which are adjusted primarily on the planet data and also from comparisons of the  northward and southward scans of the Galactic Plane.  It is then removed using Fourier techniques, which has the side-effect of increasing the noise at high frequencies.
 +
; jump correction: removes some (relatively rare: 0.3 jumps per bolometer per pointing period, on average) jumps in the signal baseline.  The jumps are detected characterized on smoothed TOIs, and corrected by adding a constant to part of the signal timeline. The origin of the jumps is not known.
 +
 
 +
The results of this processing are a timeline of signal (in absorbed watts) and a ''valid data'' flag timeline for each of the 50 valid bolometers processed; these timelines contain the full sky signal, i.e., including the solar and orbital dipoles, the Zodiacal light, and contributions from the Far-Side lobes. The dipoles are necessary for the flux calibration and are removed at the mapmaking stage.  The remaining two bolometers (143-8 and 535-3) show semi-random jumps in the signal level, typically jumping over 2-5 different ''pseudo-baseline'' levels, a behavior known as ''Random Telegraphic Signal'', so that these are commonly called the RTS bolometers.  Finally, ring-level statistics of different types (mean, median, rms, kurtosis, etc.) are determined on a per-ring basis for all timelines, and a selection based on these statistics is used to discard anomalous rings, which are recorded in a ring-level flag for each valid bolometer timeline (see the [[TOI_processing#Discarded_rings| Discarded rings]] section). 
 +
 
 +
Throughout this processing, bright planets (Mars, Jupiter, Saturn, Uranus) and bright asteroids are masked in the timeline in order to avoid ringing effects in the processing.  Since they move on the sky, the portion of the sky masked during one survey is observed during one, and no hole is left in the final map.  In parallel, the planet data are processed in a similar way, but with different parameters for the despiking step, and without the final jump correction step.  These results are processed separately to determine the beam shapes and the focal plane geometry.
 +
 
 +
The pointing is determined starting from the AHF produced by MOC, which gives the direction and orientation of the LOS of a fiducial position in the focal plane at frequencies of 8Hz during stable pointing and 4 Hz during maneuvers (TBC for details, reference).  This is interpolated to the times of data observation (ref to method), corrected for the wobble and other time-dependent offsets determined from the observed positions of a large number of sources around the sky, and finally converted to the LOS of each detector using the quaternions in the IMO (which are determined from observations of bright planets - see the [[Detector_pointing]] section).
 +
 
 +
The mapmaking and calibration process is described in detail in the [[Map-making_LFI | Map-making]] section, where detailed references are found.  In brief it consists of:
 +
 
 +
; binning the TOI data onto ''rings'' : Healpix rings (HPRs) are used here, each ring containing the combined data of one pointing period.
 +
; flux calibration : at 100-353 GHz, the flux calibration factors are determined for each pointing period (or ring) from the solar-motion dipole, using the WMAP dipole as the reference, and after removal of the dipole signal induced by the motion of the Planck satellite in the solar system.  This gain by ring is smoothed with a window of width 50 rings, which reveals an apparent variation of ~1-2% on a scale of 100s to 1000s of rings for the 100-217 GHz channels, and is applied.  At 353GHz, where the solar motion dipole is weaker compared to the signal, no gain variation is detected (within the uncertainties), and a single fixed gain is applied to all rings.  At 545 and 857 GHz the gain is determined from the observation of Uranus and Neptune (but not Jupiter which is too bright) and comparison to recent models made explicitly for this mission.  A single gain is applied to all rings at these frequencies.
 +
; destriping : in order to remove low-frequency noise, an offset per ring is determined by minimizing the differences between HPRs at their crossings, and removed.
 +
; projection onto the map : the offset-corrected and flux-calibrated HPRs are projected onto Healpix maps, with the data of each bolometer weighted by a factor of 1/NET of that bolometer, and accounting for the slight different band transmission profiles of the bolometers in each band.
 +
 
 +
These maps provide the main mission products.  A second, reduced, set of maps, cleaned of the Zodiacal emission of the FSL leakage is also produced for the nominal mission and the two single surveys, but not for the half-rings (since the contribution would be the same for the two halves of each ring).  For this purpose, the the Zodiacal emission and the FSL contamination, which are not fixed on the sky, are modeled separately at HPR-level, and subtracted from the signal HPR before projecting them onto the maps.
 +
 
 +
Together with signal maps, hit count and variance maps are also produced. The hit maps give the (integer) number of valid TOI-level samples that contribute to the signal of each pixel. All valid samples are counted in the same way, i.e., there is no weighting factor applied.  The variance maps project the white noise estimate, provided by the NETs, in the sky domain.
 +
 
 +
''' LFI processing '''
 +
 
 +
LFI maps were constructed with the Madam map-making code, version 3.7.4. The code is based on generalized destriping technique, where the correlated noise component is modeled as a sequence of constant offset,  called baselines. A noise filter was used to constrain the baseline solution allowing the use of 1 second baselines.
 +
 
 +
Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The used weights are listed in [[Map-making LFI#Map-making|Map-making]]. The flagged samples were excluded from the analysis by setting their weights to $C_{w}^{-1}$ = 0. The galaxy region was masked out in the destriping phase, to reduce error arising from strong signal gradients. The polarization component was included in the analysis, although only the temperature maps are released.
 +
 
 +
A detailed description of the map-making procedure is given in {{PlanckPapers|planck2013-p02}} and in section [[Map-making LFI#Map-making|Map-making]].
 +
 
 +
'''Inputs'''
 +
 
 +
 
 +
''' HFI inputs '''
 +
 
 +
* The cleaned TOIs of signal of each detector, together with their flags, produced by the [[TOI processing|TOI processing]] pipeline
 +
* The TOIs of pointing (quaternions), described in [[Detector_pointing]]
 +
* Bolometer-level characterization data, from the DPC's internal IMO (not distributed)
 +
* Planck orbit data used to compute and remove the earth dipole
 +
* WMAP solar dipole information used to calibrate the CMB channels
 +
* Planet models used to calibrate the Galactic channels.
 +
 
 +
''' LFI inputs '''
 +
 
 +
The Madam map-maker takes as an input:
 +
 
 +
* The calibrated timelines (for details see [[TOI processing LFI|TOI Processing]])
 +
* The detector pointings (for details see [[Detector pointing|Detector pointing]])
 +
* The noise information in the form of three-parameter (white noise level ($\sigma$), slope, and knee frequency ($f_\mathrm{knee}$)) noise model (for details see  [[The RIMO|RIMO]])
 +
 
 +
'''Related products'''
 +
 
 +
 
 +
''' Masks '''
 +
 
 +
Masks are provided of
 +
 
 +
; the point sources
 +
: 15 masks are provided, three for the LFI (one mask for each frequency masking at the 4<math>\sigma</math> level) and 12 for the HFI (two masks for each frequency at the 5 and 10<math>\sigma</math> levels. For the HFI the masks can be used as they are, for the LFI they need to be downgraded to Nside=1024 except for the 70 GHz channel at Nside=2048 which does not need to be downgraded.
 +
 
 +
; the Galactic Plane
 +
: 8 masks are provided giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage in two different files, at Nside=2048. For the HFI they can be used as they are, for the LFI they need to be downgraded at Nside=1024 (note that if using the 70 GHZ at Nside=2048 no downgraded is needed)
 +
 
 +
 
 +
The masks are binary, in GALACTIC coordinates, and NESTED ordering. The table below give the filenames. 
 +
 
 +
 
 +
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="5" cellspacing="0"
 +
|+ '''FITS filenames for masks'''
 +
|-bgcolor="ffdead"
 +
! Frequency || LFI Point Source masks
 +
|-
 +
| '''30GHz'''  || {{PLASingleFile|fileType=map|name=LFI_MASK_030-ps_2048_R1.00.fits|link=LFI_MASK_030-ps_2048_R1.00.fits}}
 +
|-
 +
| '''44GHz'''  || {{PLASingleFile|fileType=map|name=LFI_MASK_044-ps_2048_R1.00.fits|link=LFI_MASK_044-ps_2048_R1.00.fits}}
 +
|-
 +
| '''70GHz'''  || {{PLASingleFile|fileType=map|name=LFI_MASK_070-ps_2048_R1.00.fits|link=LFI_MASK_070-ps_2048_R1.00.fits}}
 +
|- bgcolor="ffdead"
 +
! colspan="2" | HFI Point Source masks
 +
|-
 +
| colspan="2" | {{PLASingleFile|fileType=map|name=HFI_Mask_PointSrc_2048_R1.10.fits|link=HFI_Mask_PointSrc_2048_R1.10.fits}}
 +
|- bgcolor="ffdead"
 +
! colspan="2" | Galactic Plane masks
 +
|-
 +
| colspan="2" | {{PLASingleFile|fileType=map|name=HFI_Mask_GalPlane_2048_R1.10.fits|link=HFI_Mask_GalPlane_2048_R1.10.fits}}
 +
|}
 +
 
 +
 
 +
The masks are shows below in a single figure.  While this is quite clear for the Galactic Plane masks, it is less so for the point source masks, but it does give a clear perspective on how the latter are distributed over the sky.
 +
 
 +
<center>
 +
<gallery perrow=2 widths=300px heights=185px >
 +
File: HFI_GalPlaneMask.png |  '''Galactic Plane masks'''
 +
File: HFI_PointSrcMask.png  | '''PointSource masks'''
 +
</gallery>
 +
</center>
 +
 
 +
''' File names '''
 +
 
 +
 
 +
The FITS filenames are of the form ''{H|L}FI_SkyMap_fff_nnnn_R1.nn_{coverage}_{type}.fits'', where ''fff'' are three digits to indicate the Planck frequency band, and ''nnnn'' is the Healpix Nside of the map, ''coverage'' indicates which part of the mission is covered, and the optional ''type'' indicates the subset of input data used.  A full list of products, with links to them in the Archive, is given in the tables below.
 +
 
 +
For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the 9 frequency maps as separate columns in a single extension. The 9 columns in this file contain the intensity maps ONLY and no other information (hit maps and variance maps) is provided.
 +
 
 +
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="5" cellspacing="0"  width=500px
 +
|+ '''FITS filenames'''
 +
|- bgcolor="ffdead"
 +
! Frequency || Full channel maps
 +
|-
 +
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal.fits|link=LFI_SkyMap_030_1024_R1.10_nominal.fits}}
 +
|-
 +
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal.fits|link=LFI_SkyMap_044_1024_R1.10_nominal.fits}}
 +
|-
 +
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal.fits|link=LFI_SkyMap_070_1024_R1.10_nominal.fits}}
 +
|-
 +
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal.fits|link=LFI_SkyMap_070_2048_R1.10_nominal.fits}}
 +
|-
 +
| '''100GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal.fits|link=HFI_SkyMap_100_2048_R1.10_nominal.fits}}
 +
|-
 +
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal.fits|link=HFI_SkyMap_143_2048_R1.10_nominal.fits}}
 +
|-
 +
| '''217GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal.fits|link=HFI_SkyMap_217_2048_R1.10_nominal.fits}}
 +
|-
 +
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal.fits|link=HFI_SkyMap_353_2048_R1.10_nominal.fits}}
 +
|-
 +
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal.fits|link=HFI_SkyMap_545_2048_R1.10_nominal.fits}}
 +
|-
 +
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal.fits|link=HFI_SkyMap_857_2048_R1.10_nominal.fits}}
 +
|- bgcolor="ffdead"
 +
! Frequency ||  Full channel, Zodi-corrected maps
 +
|-
 +
| '''100GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits}}
 +
|-
 +
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits}}
 +
|-
 +
| '''217GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits}}
 +
|-
 +
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits}}
 +
|-
 +
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits}}
 +
|-
 +
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits}}
 +
|- bgcolor="ffdead"
 +
! Frequency ||  Combined frequency maps
 +
|-
 +
| '''All''' ||  {{PLASingleFile|fileType=file|name=COM_MapSet_I-allFreqs_R1.10_nominal.fits|link=COM_MapSet_I-allFreqs_R1.10_nominal.fits}}
 +
|}
 +
 
 +
 
 +
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="5" cellspacing="0" width=850px
 +
|+ '''FITS filenames'''
 +
|- bgcolor="ffdead"
 +
! Frequency ||  Survey 1 maps || Survey 2 maps
 +
|-
 +
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_1.fits|link=LFI_SkyMap_030_1024_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_2.fits|link=LFI_SkyMap_030_1024_R1.10_survey_2.fits}}
 +
|-
 +
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_1.fits|link=LFI_SkyMap_044_1024_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_2.fits|link=LFI_SkyMap_044_1024_R1.10_survey_2.fits}}
 
|-
 
|-
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal.fits|link=LFI_SkyMap_030_1024_R1.10_nominal.fits}}
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_1.fits|link=LFI_SkyMap_070_1024_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_2.fits|link=LFI_SkyMap_070_1024_R1.10_survey_2.fits}}
 
|-
 
|-
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal.fits|link=LFI_SkyMap_044_1024_R1.10_nominal.fits}}
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_1.fits|link=LFI_SkyMap_070_2048_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_2.fits|link=LFI_SkyMap_070_2048_R1.10_survey_2.fits}}
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal.fits|link=LFI_SkyMap_070_1024_R1.10_nominal.fits}}
+
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2.fits}}
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal.fits|link=LFI_SkyMap_070_2048_R1.10_nominal.fits}}
+
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2.fits}}
 
|-
 
|-
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal.fits|link=HFI_SkyMap_100_2048_R1.10_nominal.fits}}
+
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2.fits}}
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal.fits|link=HFI_SkyMap_143_2048_R1.10_nominal.fits}}
+
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2.fits}}
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal.fits|link=HFI_SkyMap_217_2048_R1.10_nominal.fits}}
+
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2.fits}}
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal.fits|link=HFI_SkyMap_353_2048_R1.10_nominal.fits}}
+
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1.fits}} ||
|-
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2.fits}}
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal.fits|link=HFI_SkyMap_545_2048_R1.10_nominal.fits}}
 
|-
 
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal.fits|link=HFI_SkyMap_857_2048_R1.10_nominal.fits}}
 
 
|- bgcolor="ffdead"
 
|- bgcolor="ffdead"
! Frequency ||  Full channel, Zodi-corrected maps
+
! Frequency ||  Survey 1 Zodi-corrected maps || Survey 2 Zodi-corrected maps
 
|-
 
|-
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits}}  
+
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits}}
+
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits}}
+
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits}}
+
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
|-
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits}}
+
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
|-
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits}}
+
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 +
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|- bgcolor="ffdead"
 
|- bgcolor="ffdead"
! Frequency ||  Combined frequency maps
+
! Frequency ||  Half-ring 1 maps ||Half-ring 2 maps
 
|-
 
|-
| '''All''' || {{PLASingleFile|fileType=file|name=COM_MapSet_I-allFreqs_R1.10_nominal.fits|link=COM_MapSet_I-allFreqs_R1.10_nominal.fits}}  
+
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits}} ||
|}
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits}}
 
 
 
 
{| class="wikitable"  align="center" style="text-align:center" border="1" cellpadding="5" cellspacing="0" width=850px
 
|+ '''FITS filenames'''
 
|- bgcolor="ffdead"
 
! Frequency ||  Survey 1 maps || Survey 2 maps
 
 
|-
 
|-
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_1.fits|link=LFI_SkyMap_030_1024_R1.10_survey_1.fits}} ||
+
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_survey_2.fits|link=LFI_SkyMap_030_1024_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
|-
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_1.fits|link=LFI_SkyMap_044_1024_R1.10_survey_1.fits}} ||
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_survey_2.fits|link=LFI_SkyMap_044_1024_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_1.fits|link=LFI_SkyMap_070_1024_R1.10_survey_1.fits}} ||
+
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_survey_2.fits|link=LFI_SkyMap_070_1024_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
|-
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_1.fits|link=LFI_SkyMap_070_2048_R1.10_survey_1.fits}} ||
+
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_survey_2.fits|link=LFI_SkyMap_070_2048_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
|-
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1.fits}} ||
+
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
|-
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1.fits}} ||
+
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
|-
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1.fits}} ||
+
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
|-
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1.fits}} ||
+
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
|-
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1.fits}} ||
+
| '''857GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits}} ||
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2.fits}}
+
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits}}
|-
+
|}
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1.fits}} ||
+
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2.fits}}
+
''' FITS file structure '''
|- bgcolor="ffdead"
 
! Frequency ||  Survey 1 Zodi-corrected maps || Survey 2 Zodi-corrected maps
 
|-
 
| '''100GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
| '''143GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
| '''217GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
| '''353GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
| '''545GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|-
 
| '''857GHz''' || {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits|link=HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits}}
 
|- bgcolor="ffdead"
 
! Frequency ||  Half-ring 1 maps ||Half-ring 2 maps
 
|-
 
| '''30GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''44GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''70GHz''' || {{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits|link=LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''100GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''143GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''217GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''353GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''545GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits}}
 
|-
 
| '''857GHz''' ||  {{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits}} ||
 
{{PLASingleFile|fileType=map|name=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits|link=HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits}}
 
|}
 
 
 
== FITS file structure ==
 
  
  
Line 1,571: Line 1,753:
 
The same structure applies to all ''SkyMap'' products, independent of whether they are full channel, survey of half-ring.  The distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).
 
The same structure applies to all ''SkyMap'' products, independent of whether they are full channel, survey of half-ring.  The distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).
  
== References ==
+
''' References'''
  
 
<References />
 
<References />

Latest revision as of 11:57, 14 December 2022

General description[edit]

Sky maps give the best estimate of the intensity and polarization (Stokes Q and U components), if available, of the signal from the sky after removal, as far as possible, of known systematic effects (mostly instrumental, but including also the solar and Earth-motion dipoles, Galactic stray light, and the zodiacal light). The Planck Collaboration has made three releases of maps, in 2013, 2015 and 2018. This section describes the 2018 release. For descriptions of the other two releases, please go to the sections at the end of this chapter related to 2013 and 2015.

In the 2013, 2015 and 2018 releases, sky maps are provided for the full Planck mission using all valid detectors in each frequency channel, and also for various subsets obtained by splitting the mission into various time ranges or into subsets of the detectors in a given channel, or by considering only odd or even pointing periods. These products are especially interesting for characterization purposes (see also the data validation section), though some are also useful for the study of source variability. The details of the start and end of the time ranges are given in the table below.

For this (2018) release, HFI is providing a more limited subset of maps that include the full channel maps, the half-mission and the odd-even ring splits. Also, note that for the 353 GHz band, both full channel and PSBs only maps are provided, and that by default it is the PBS-only maps that are served.


Ranges for mission and surveys
Range ODs HFI rings pointing-IDs Comment
Nominal mission 91 - 563 240 - 14723 00004200 - 03180200
Full mission 91 - 974 240 - 27005 00004200 - 05322620 For HFI
Full mission 91 - 1543 n/a 00004200 - 06511160 For LFI
Survey 1 91 - 270 240 - 5720 00004200 - 01059820
Survey 2 270 - 456 5721 - 11194 01059830 - 02114520
Survey 3 456 - 636 11195 - 16691 02114530 - 03193660
Survey 4 636 - 807 16692 - 21720 03193670 - 04243900
Survey 5 807 - 974 21721 - 26050 05267180 - 05322590 End of mission for HFI
Survey 5 807 - 993 n/a 05267180 - 06344800 End of survey for LFI
Survey 6 993 - 1177 n/a 06344810 - 06398120 LFI only
Survey 7 1177 - 1358 n/a 06398130 - 06456410 LFI only
Survey 8 1358 - 1543 n/a 06456420 - 06511160 LFI only
HFI mission-half-1 91 - 531 240 - 13471 00004200 - 03155580
HFI mission-half-2 531 - 974 13472 - 27005 03155590 - 05322590
LFI Year 1 91 - 456 n/a 00004200 - 02114520
LFI Year 2 456 - 807 n/a 02114530 - 04243900
LFI Year 3 807 - 1177 n/a 05267180 - 06398120
LFI Year 4 1177 - 1543 n/a 06398130 - 06511160

To help in further processing, there are also masks of the Galactic plane and of point sources, each provided for several different depths.

All sky maps are in HEALPix format, with Nside=1024 (for LFI 30, 44, and 70GHz) and 2048 (for LFI 70GHz and HFI), in Galactic coordinates, and with nested ordering.

WARNING: The HEALPix convention for polarization is not the same as the IAU convention (Section 8 on this page).

The signal is given in units of KCMB for 30 to 353 GHz, and of MJy.sr-1 (for a constant νIν energy distribution) for 545 and 857 GHz. For each frequency channel, the intensity and polarization maps are packaged into a "BINTABLE" extension of a FITS file together with a hit-counts map (or "hits map", for short, giving the number of observation samples that are accumulated in a pixel, all detectors combined) and with the variance and covariance maps. Additional information is given in the FITS file header. The structure of the FITS file is given in the FITS file structure section below.

Production process[edit]

Sky maps are produced by appropriately combining the data from all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarized) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system. In particular, they include the zodiacal light emission ("zodi" for short) and also the scattering from the far sidelobes of the beams (FSL). More on this below.

HFI processing[edit]

The mapmaking and calibration process is described in detail in the mapmaking section and in the Planck-2016-XLVI[1] paper, where detailed references can be found. In brief, the timelines are cleaned and calibrated and converted into HealPix rings (HPRs), then SRoll is applied to destripe them in polarised space (removal of very low frequency noise by minimising differences at ring crossing points), to remove knows systematic effects (including the flux calibration), and to project them onto a HealPix map.

The processing yields maps of the signal, hit counts and auto- and cross-variance maps for the 6 full channel and for a pseudo-channel built from the 353 PSBs only. For each channel HFI provides

  • a map for the full mission
  • two maps for each half-mission
  • two maps for built from odd or even rings only

for a total of 35 maps.

PR3 HFI products[edit]

Healpix Pixel Rings (HPRs)[edit]

SRoll main products are the HFI frequency maps. Nevertheless, we also make available the Healpix Pixel Rings (HPRs) of those maps, ie. the data before projection. See description of those files.

Frequency maps[edit]

The 35 HFI frequency maps of the PR3 Legacy Release are the followings:

PR3 HFI frequency maps
100 GHz 143 GHz 217 GHz 353 GHz 353_PSB GHz 545 GHz 857 GHz
Full mission I, Q, U I, Q, U I, Q, U I, Q, U I, Q, U I I
Half mission 1 I, Q, U I, Q, U I, Q, U I, Q, U I, Q, U I I
Half mission 2 I, Q, U I, Q, U I, Q, U I, Q, U I, Q, U I I
Odd rings I, Q, U I, Q, U I, Q, U I, Q, U I, Q, U I I
Even rings I, Q, U I, Q, U I, Q, U I, Q, U I, Q, U I I

See description of those files. These maps are available on the [Planck Legacy Archive].


LFI processing[edit]

LFI maps were constructed with the MADAM mapmaking code, version 3.7.4. The code is based on a generalized destriping technique, where the correlated noise component is modelled as a sequence of constant offsets, called "baselines". A noise filter was used to constrain the baseline solution, allowing the use of 0.25-s and 1-s baselines for the 30 and 44GHz, and 70 GHz channels, respectively. See section 6 of Planck-2020-A2[2].


Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The flagged samples were excluded from the analysis by setting their weights to Cw-1 = 0. The Galaxy region was masked out in the destriping phase, to reduce errors arising from strong signal gradients. The polarization component was included in the analysis.

Dipole and Far Side Lobe correction
Input timelines are cleaned by the 4π-convolved dipole and Galactic stray light, obtained as a convolution of the 4π in-band far sidelobes and Galactic simulations, as explained in Planck-2020-A2[2].

Scaling of the maps due to beam effects is taken into account in the LFI's beam functions (as provided in the RIMO) which should be used for analysis of diffuse components.

Bandpass leakage correction 
LFI high-resolution maps have been reseleased corrected for bandpass leakage or uncorrected. Further details about the procedure used to generate the bandpass correction maps can be found in section 7 of Planck-2020-A2[2].
Map zero-level 
The 30, 44 and 70 GHz, maps are corrected for a zero-level monopole by applying an offset correction (see the LFI Calibration paper, Planck-2015-A05[3]). Note that the offset applied is indicated in the header as a comment keyword.

A detailed description of the mapmaking procedure is given in Planck-2013-II[4], Planck-2015-A02[5], Planck-2015-A06[6] and in the Mapmaking section here, in Planck-2020-A2[2] only a summary is reported.

Types of map[edit]

Full-mission, full-channel maps (7 HFI, 4 LFI)[edit]

Full channel maps are built using all the valid detectors of a frequency channel and cover either the full or the nominal mission. For HFI, the 143-8 and 545-3 bolometers are rejected entirely, since they are seriously affected by RTS noise. HFI provides the Q and U components for the 100, 143, 217 and 353 GHz channels only. LFI provides the I, Q, and U maps for all the channels. Note that the HFI and LFI Q and U maps are corrected for bandpass leakage, version without correction for LFi is also provided. The I, Q, and U maps are displayed in the figures below. The colour range here is set using a histogram equalization scheme (from HEALPix) that is useful for these non-Gaussian data fields. For visualization purposes, the Q and U maps shown here have been smoothed with a 1° Gaussian kernel, otherwise they look like noise to the naked eye. The 70 GHz full map is also available at Nside=2048.

The high dynamic range colour scheme of the Planck maps is described here.



Full mission light maps, full channel maps (7 HFI, 7 LFI)[edit]

These maps are based on the Full mission maps but contain fewer columns, IQU from 30 to 353 GHz, and I only at 545 and 857 GHz. These maps have been produced to reduce the transfer time of the most downloaded frequency full mission maps.

Single-survey, full-channel maps (35 LFI)[edit]

Single-survey maps are built using all valid detectors of a frequency channel; they separately cover the different sky surveys. The surveys are defined as the times over which the satellite spin axis rotates by 180°, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between about 80% and 90%, depending on detector position. During adjacent surveys the sky is scanned in opposite directions (more precisely it is the ecliptic equator that is scanned in opposite directions). While these are useful to investigate variable sources, they are also used to study the systematics of the time-response of the detectors as they scan bright sources, like the Galactic Plane, in different directions during different survey. Note that the HFI and LFI missions cover five and eight surveys, respectively, and in the case of HFI the last survey in incomplete. The 70 GHz survey maps are available also at Nside=2048. Note that LFI provides a special survey-map combination used in the low-ℓ analysis; this maps, available at the three LFI frequencies, 30, 44, and 70 GHz, was built using the combination of Surveys 1, 3, 5, 6, 7, and 8.

Year maps, full-channel maps (16 LFI)[edit]

These maps are built using the data of Surveys 1+2, Surveys 3+4, and so forth. They are used to study long-term systematic effects. The 70 GHz years maps are available also at Nside=2048.

Half-mission maps, full-channel maps (14 HFI, 12 LFI)[edit]

For HFI, the half mission is defined after eliminating those rings that are discarded for all bolometers, many of which occurred during the 5th survey when the "End-of-Life" tests were performed. The remaining rings are divided in half to define the two halves of the mission. This exercise is done for the full mission only.

For LFI, instead of the half-mission maps, the following year combinations have been created: Year 1+2, Year 1+3, Year 2+4, Year 3+4,

Full mission, single-detector maps (22 LFI)[edit]

For LFI, all the 22 Radiometers maps are available, and (obviously) only in Stokes I.

Full-mission, detector-set or detector-pairs maps (8 LFI)[edit]

The objective here is to build independent temperature (I) and polarization (Q and U) maps using the two pairs of polarization-sensitive detectors of each channel where they are available, i.e., for the 44-353 GHz channels. The table below indicates which detectors were used to build each detector set (detset).

Definition of LFI detector pairs
Frequency Horn pair Comment
44 GHz 24 This map is only in temperature
44 GHz 25 and 26
70 GHz 18 and 23 Available also at Nside=2048
70 GHz 19 and 22 Available also at Nside=2048
70 GHz 20 and 21 Available also at Nside=2048

Half-ring maps (62 LFI)[edit]

These maps are similar to the ones described above, but are built using only the first or the second halves of each ring (or pointing period). The HFI provides half-ring maps for the full mission only, as well as for the full channel, the detsets, and the single bolometers. The LFI provides half-ring maps for the full mission in each channel (70 GHz also at Nside=2048), for the full-mission radiometers, and for the full-mission horn pairs.

=== Odd and even rings maps (14 HFI)

As the name indicates, these are generated by using only the odd or only the even rings.

Caveats and known issues[edit]

HFI frequency maps[edit]

Some imperfections have shown up in the tests of the HFI PR3 maps that were previously hidden by higher-level systematics in the previous PR2 data. These lead to guidelines for the proper use of the HFI PR3 data. See Planck-2020-A3[7] for a detailed description of all these issues.

Update 12 Sep 2018: Covariance matrices in PR3.00 frequency maps FITS files were not correctly computed and contained wrong values. They must not be used for any purpose. These maps have been removed from the PLA. Version 3.01 must be used instead. Intensity, polarization and hit count maps have not changed.

Monopoles[edit]

Monopoles, which cannot be extracted from Planck data alone, are adjusted at each frequency (as was done in the previous PR2 release). For component separation, this provides maps that can be used directly in combination with other tracers. See Planck-2020-A3[7] for a detailed discussion. In the 2018 maps, three monopoles have been adjusted:

  • during production of the HFI frequency maps, an HI correlation analysis is carried out to adjust the overall monopole of the map to be consistent with the intensity of the Galactic dust foreground at high galactic latitudes (this adjustment was also done in the 2016 maps)
  • a monopole corresponding to the zero-level of the CIB (Cosmic Infrared Background) estimated from a galaxy evolution model has been added to the maps (as for the 2016 maps)
  • a monopole corresponding to the zero-level of zodiacal emission, representative of the high ecliptic latitude emission regions, has been added to the maps (note that this was not done in the 2016 maps).

It is recommended that for work separating CMB and diffuse Galactic components from HFI frequency maps, the CIB and Zodiacal emission monopoles should first be removed. Furthermore, especially for applications at low intensity, it is critical to appreciate that there are significant uncertainties in the zero levels in the Galactic maps. It is therefore also recommended that the maps be correlated with the HI map at high latitude, following the detailed methodology set out in Planck-2013-VIII[8] and [9]. Consideration should also be given to the possible effect of dust in the warm ionized medium, as discussed and quantified in [9].

Solar dipole residual[edit]

The Planck 2015 Solar dipole is removed from the PR3 HFI maps to be consistent with LFI maps and to facilitate comparison with the previous PR2 ones. The best Solar dipole determination from HFI PR3 data shows a small shift in direction of about 1', but a 1.8 μK lower amplitude. Removal of the Planck 2015 Solar dipole thus leaves a small but non-negligible dipole residual in the HFI PR3 maps. To correct for this, and adjust maps at the best photometric calibration, users of the HFI PR3 maps should:

  1. put back into the maps the Planck 2015 Solar dipole (d,l,b)= (3364.5 ± 2.0 μK, 264.00 ± 0.03°, 48.24 ± 0.02°),
  2. include the absolute calibration frequency bias, i.e., multiply by 1 minus the calibration bias,
  3. lastly, remove the HFI 2018 Solar dipole.
Use of the 353 GHz SWBs[edit]

In 2018, two types of maps at 353 GHz are provided, one including only PSBs and one including both PSBs and SWBs. For reasons detailed in Planck-2020-A3[7], it is recommended to use the former (i.e. only including PSBs). The alternative one including the 353 GHz SWBs should be used only for specific uses such as, for example, increasing the signal to noise level at high multipoles.

Color correction and component separation[edit]

In 2018 the SRoll algorithm has been used to produce the frequency maps. This algorithms adjusts by construction all single bolometer maps to the band average response. For this reason, it becomes impossible to use the different individual bolometer responses to extract foreground component maps, and the individual bolometer maps are not provided as part of the release. See Planck-2020-A3[7] for a detailed description. Note also that for the same reason, the effective bandpass response of the 2018 maps is not the same as for the 2015 maps. The new bandpass response is established in the 2018 RIMO.

Sub-pixel effects in very bright regions[edit]

The bandpass corrections have been optimized for high latitude regions which implied to reduce the noise of the CO and dust bandpass templates to avoid the introduction of significant correlated noise. The effect is negligible for dust but not for CO in very bright regions. As a consequence, some systematic effects (which appear as striping) appear in some of the maps in the brightest galactic emission regions. See detailed description.

LFI Frequency maps[edit]

TBD

Inputs[edit]

HFI inputs[edit]

The HFI mapmaking takes as input:

  • the cleaned TOIs of the signal from each detector, together with their flags, produced by the TOI processing pipeline;
  • the TOIs of pointing (quaternions), described in Detector pointing;
  • bolometer-level characterization data, from the DPC's internal IMO (not distributed);
  • Planck orbit data, used to compute and remove the Earth's dipole;
  • Planck solar dipole information, used to calibrate the CMB channels;
  • planet models used to calibrate the Galactic channels.

LFI inputs[edit]

The MADAM mapmaker takes as input:

  • the calibrated timelines (for details see TOI Processing);
  • the detector pointings (for details see Detector pointing);
  • the noise information in the form of 3-parameter (white noise level σ, slope, and knee frequency fknee) noise model (for details see RIMO).

Related products[edit]

Masks[edit]

This section presents the "general purpose" masks. Other masks specific to certain products are packaged with those products.

Note that for this release, HFI has not produced any new masks.

Point source masks[edit]

For HFI and LFI two sets of point-source masks are provided.

  • Intensity masks, which remove sources detected with S/N > 5.
  • Polarisation masks, which remove sources that have polarization detection significance levels of 99.97 % or greater at the position of a source detected in intensity. They were derived from the polarization maps with dust foreground bandpass mismatch leakage corrections applied. The area excised around each source has a radius of 3σ (width) of the beam, i.e., 1.27 FWHM (for LFI the cut around each source has a radius of 32 arcmin at 30GHz, 27 arcmin at 44 GHz, and 13 arcmin at 70 GHz).

Both sets of masks are found in the files HFI_Mask_PointSrc_2048_R2.00.fits and LFI_Mask_PointSrc_2048_R2.00.fits, in which the first extension contains the intensity masks, and the second contains the polarization masks.

Galactic plane masks[edit]

Eight Galactic emission masks are provided, giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage, derived from the 353 GHz map after CMB subtraction. These are independent of frequency channel. Three versions are given: not apodized; and apodized by 2° and 5°. The filenames are HFI_Mask_GalPlane-apoN_2048_R2.00.fits, where N = 0, 2, and 5.

The masks are shown below. The eight "GalPlane" masks are combined (added together) and shown in a single figure for each of the three apodizations. While the result is quite clear for the case of no apodization, it is less so for the apodized case. The "PointSrc" masks are shown separately for the intensity case.

File names[edit]

The FITS filenames are of the form {H|L}FI_SkyMap_fff{-tag}_Nside_R3.nn_{coverage}-{type}.fits, where "fff" are three digits to indicate the Planck frequency band, "tag" indicates the single detector or the detset (no "tag" indicates full channel), "Nside" is the HEALPix Nside value of the map, "coverage" indicates which part of the mission is covered (full, half mission, survey, year, etc.), and the optional "type" indicates the subset of input data used. The table below lists the products by type, with the appropriate unix wildcards that form the full filename.

HFI FITS filenames
Coverage Filename
Full channel, full mission HFI_SkyMap_fff{-tag}_2048_R3.??_full.fits
Full channel, half mission HFI_SkyMap_fff{-tag}_2048_R3.??_halfmission-{1/2}.fits
Full channel, full mission, odd/even ring HFI_SkyMap_fff{-tag}_2048_R3.??_{odd/even}ring.fits
LFI FITS filenames
Coverage Filename Half-ring filename Comment
Full channel, full mission LFI_SkyMap_???_1024_R3.??_full.fits LFI_SkyMap_???_1024_R3.??_full-ringhalf-?.fits 70GHz is corrected for Template
Full channel, full mission BandPass corrected LFI_SkyMap_???-BPassCorrected_1024_R3.??_full.fits LFI_SkyMap_???-BPassCorrected_???_1024_R3.??_full-ringhalf-?.fits 70GHz is corrected for Template
Full channel, single survey LFI_SkyMap_???_1024_R3.??_survey-?.fits n/a n/a
Full channel, survey combination LFI_SkyMap_???_1024_R3.??_survey-1-3-5-6-7-8.fits n/a n/a
Full channel, survey combination BandPass corrected LFI_SkyMap_???_1024_R3.??-BPassCorrected_survey-1-3-5-6-7-8.fits n/a n/a
Full channel, single year LFI_SkyMap_???_1024_R3.??_year-?.fits n/a n/a
Full channel, single year BandPass corrected LFI_SkyMap_???-BPassCorrected_1024_R3.??_year-?.fits n/a n/a
Full channel, year combination LFI_SkyMap_???_1024_R3.??_year?-?.fits n/a n/a
Full channel, year combination BandPass corrected LFI_SkyMap_???-BPassCorrected_1024_R3.??_year?-?.fits n/a n/a
Horn pair, full mission LFI_SkyMap_???-??-??_1024_R3.??_full.fits LFI_SkyMap_???_??-??_1024_R3.??_full-ringhalf-?.fits n/a
Single radiometer, full mission LFI_SkyMap_???-???_1024_R3.??_full.fits LFI_SkyMap_???-???_1024_R3.??_full-ringhalf-?.fits n/a

For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the nine frequency maps as separate columns in a single extension. The nine columns in this file contain the intensity maps only and no other information (hits maps or variance maps) is provided.

FITS file structure[edit]

The FITS files for the sky maps contain a minimal primary header with no data, and a BINTABLE extension (EXTENSION 1, EXTNAME = FREQ-MAP) containing the data. The structure is shown schematically in the figure below. The FREQ-MAP extension contains a 3- or 10-column table that contain the signal, hit-count, and variance maps, all in HEALPix format. The 3-column case is for intensity only maps, while the 10-column case is for polarization. The number of rows is the number of map pixels, which is Npix = 12 Nside2 for HEALPix maps, where Nside = 1024 or 2048 for most the maps presented in this section.

FITS file structure.

Note that file sizes are approximately 0.6 GB for I-only maps and 1.9 GB for IQU maps at Nside=2048, but about 0.14 GB for I-only maps and 0.45 GB for IQU maps at Npix=1024 .

Keywords indicate the coordinate system ("GALACTIC"), the HEALPix ordering scheme ("NESTED"), the units (KCMB or MJy.sr-1) of each column, and of course the frequency channel ("FREQ"). Where polarization Q and U maps are provided, the "COSMO" polarization convention (used in HEALPix) is adopted, and it is specified in the "POLCCONV" keyword (see this section). The "COMMENT" fields give a one-line summary of the product, and some other information useful for traceability within the DPCs. The original filename is also given in the "FILENAME" keyword. The "BAD_DATA" keyword gives the value used by HEALPix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The main parameters are summarized in the table below.

Sky map file data structure
1. EXTNAME = 'FREQ-MAP' : Data columns
Column name Data type Units Description
I_STOKES Real*4 KCMB or MJy.sr-1 Stokes I map
Q_STOKES Real*4 KCMB or MJy.sr-1 Stokes Q map (optional)
U_STOKES Real*4 KCMB or MJy.sr-1 Stokes U map (optional)
HITS Int*4 none The hit-count map
II_COV Real*4 KCMB2 or (MJy.sr-1)2 II variance map
IQ_COV Real*4 KCMB2 or (MJy.sr-1)2 IQ variance map (optional)
IU_COV Real*4 KCMB2 or (MJy.sr-1)2 IQ variance map (optional)
QQ_COV Real*4 KCMB2 or (MJy.sr-1)2 QQ variance map (optional)
QU_COV Real*4 KCMB2 or (MJy.sr-1)2 QU variance map (optional)
UU_COV Real*4 KCMB2 or (MJy.sr-1)2 UU variance map (optional)
Keyword Data type Value Description
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
POLCCONV String COSMO Polarization convention
NSIDE Int 1024 or 2048 HEALPix Nside
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 12 Nside2 – 1 Last pixel number
FREQ String nnn Frequency channel


The same structure applies to all "SkyMap" products, independent of whether they are full channel, survey of half-ring. The distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).

Polarization convention used in the Planck project[edit]

The FITS keyword "POLCCONV" defines the polarization convention of the data within the file. The Planck collaboration used the COSMO convention for the polarization angle (as usually adopted in space-based and other CMB missions), whereas other subfields of astronomy usually adopt the IAU convention. The basic difference comes down to whether one thinks of the light rays being emitted from the origin (the usual mathematics/physics convention) or converging on the observer from the sky (the usual astronomy convention), and hence the "obvious" choice is different for a physicists and for an astronomer. Given that CMB results are of interest to a wide range of both physicists and astronomers, there is no single choice of convention that everyone would regard as self-evident. Hence one simply has to be aware of the convention being adopted. Because of this the Planck Collaboration has taken pains to point out which convention is being used in publications and in data releases. In the following we describe the difference between these two conventions, and the consequence if it is not taken into account correctly in the analysis.

Figure 1. Polarization conventions, showing the COSMO convention (left) and IAU convention (right). The vector [math]\hat{z}[/math] points in the outward direction in COSMO, and inwards in IAU. The bottom panel refers to the plane tangent to the sphere.

Changing the orientation convention is equivalent to a transformation ψ'=π-ψ of the polarization angle (Figure 1). The consequence of this transformation is the inversion of the Stokes parameter U. The components of the polarization tensor in the helicity basis [math]\epsilon^{\pm}=(\hat{x}\pm i\hat{y})/\sqrt{2}[/math] are

[math] (Q+iU)(\hat{n}) = \sum _{\ell m}a_{2,lm}{}_{2}Y_{\ell }^{m}(\hat{n}), \\(Q-iU)(\hat{n}) = \sum _{\ell m}a_{-2,lm}{}_{2}Y_{\ell }^{m}(\hat{n}), [/math]

where [math]{}_{2}Y_{\ell }^{m}(\hat{n})[/math] are the spin-weighted spherical harmonic functions. The E and B modes can be defined as

[math] E(\hat{n}) = \sum_{\ell m}a_{E,\ell m}Y_{\ell }^{m}(\hat{n}), \\B(\hat{n}) = \sum_{\ell m}a_{B,\ell m}Y_{\ell }^{m}(\hat{n}), [/math]

where the coefficients aE,ℓm and aB,ℓm are derived from linear combinations of the a2,ℓm, a-2,ℓm, defined implicitly in the first equation (Q± iU).

Test gradient.jpg
Figure 2. Error on Planck-LFI 70 GHz EE (top) and BB (bottom) power spectra, in the case of an incorrect choice being made for the polarization coordinate system convention (IAU instead of COSMO).

The effect of the sign inversion of U on the polarization spectra is a non-trivial mixing of E and B modes. An example of the typical error on EE and BB auto-spectra in the case of the wrong choice for the polarization basis is shown in Figure 2.

One should be careful to be aware of the polarization convention that is being adopted. If the IAU convention is used in computing the power spectra, then the sign of the U component of the Planck maps must be inverted before computing the E and B modes.

In astronomical applications it is common to define a pseudo-vector P to show the amplitude and orientation of polarization on a map. When plotting these line segments to show the orientation of the plane of polarization (or the orthogonal direction, often considered to be the projection of the magnetic field), the results are the same for both the COSMO and IAU conventions. This because the appearance of P is a property of the radiation and hence not affected by the sign of U.

Note on the convention used in the Planck Catalogue of Compact Sources (PCCS)[edit]

Planck non-cosmology papers sometimes follow the IAU convention for internal analysis, for ease of comparison with other studies (e.g., comparison of Planck-derived thermal dust emission polarization with the optical polarization of starlight). Nevertheless, Planck data products, such as component-separated maps, still use the COSMO convention. The one exception is for the compact source catalogue. Because catalogues of astronomical objects found by Planck need to be compared directly with other source catalogues, the polarized sources described in the Planck Catalogue of Compact Sources follow the IAU convention, and the polarization angles are defined on an interval of [-90°,90°]. To switch to the COSMO convention, the polarization angles listed in the catalogue should be shifted by 90° and multiplied by -1.

References[edit]


Other releases: 2020-NPIPE, 2015 and 2013[edit]

2020 - NPIPE

The NPIPE flight data maps include several subsets and differ from earlier Planck releases.

Frequency maps

All NPIPE maps, even at 545 and 857GHz, are calibrated into CMB kelvins. The temperature maps include the solar system dipole. The monopole of the maps is arbitrary. Only the seasonally-varying part of zodiacal light is removed.

Properties of the frequency maps are indicated in the following table:

Nominal frequency [GHz] Eff. freq. [GHz] in T, alpha=-1a Eff. freq. [GHz] in P, alpha=-1b Eff. freq. [GHz] in T, alpha=4c Eff. freq. [GHz] in P, alpha=4 Approx. resolution [arc min]d Average T noise [uK-arcmin]e Average P noise [uK-arcmin]f Calibration uncertainty [%]g
30 28.27 ± 0.03 same as T 29.22 ± 0.04 same as T 31.5 179 354 0.045
44 43.94 ± 0.04 same as T 44.69 ± 0.03 same as T 27.1 203 425 0.040
70 69.97 ± 0.04 same as T 72.16 ± 0.03 same as T 12.8 182 363 0.030
100 100.32 ± 0.09 100.31 ± 0.09 106.01 ± 0.06 106.01 ± 0.06 9.47 81.3 173 0.023
143 141.41 ± 0.02 140.75 ± 0.02 149.30 ± 0.01 148.91 ± 0.02 7.15 32.2 93.7 0.018
217 220.157 ± 0.005 219.222 ± 0.006 230.685 ± 0.005 230.060 ± 0.006 4.84 52.6 136 0.024
353 358.291 ± 0.005 357.432 ± 0.005 372.702 ± 0.005 371.774 ± 0.005 4.76 283 556 0.053
545 552.155 ± 0.006 n/a 576.660 ± 0.004 n/a 4.62 4680 n/a 0.571
857 854.288 ± 0.006 n/a 891.617 ± 0.006 n/a 4.23 388000 n/a 5

a Effective central frequency for a synchrotron-like emission. LFI uncertainties are based on a flat 30% uncertainty in each bandpass bin. HFI uncertainties use estimated statistical uncertainties in each bin.

b Polarized central frequency differs from temperature for HFI because of the non-ideal polarization sensitivity.

c Effective central frequency for a thermal dust-like emission.

d Approximate resolution is measured by fitting a Gaussian beam model to the QuickPol beam window function for intensity.

e Average noise depth is measured as the standard deviation of the simulated residual maps and includes statistical and systematic elements. Planck noise is not uniformly distributed: this value overestimates the depth near the Ecliptic poles and underestimates the depth at the Ecliptic equator. The noise is also scale-dependent, causing the depth to change in a non-trivial manner when downgrading or smoothing the maps.

f Polarized noise depth is the length of the [Q, U] error vector, not the individual Q or U uncertainty.

g Overall calibration uncertainty as reported in Table 7 of A&A 643, A42 (2020). 857GHz calibration uncertainty continues to be dominated by a 5% planetary emission model uncertainty.

All effective frequencies are based on integrals of the ground-measured detector bandpasses and noise weights as they are recorded in the accompanying instrument model. Inverse variance noise weights in each horn are symmetrized:

Symmetrized noise weights

Half-ring maps

Half-ring frequency maps can be used to gauge instrumental noise. The large-scale systematics residuals in this split are fully correlated and cancel in the difference. The half-ring split data were destriped independently with Madam to avoid correlated noise residuals.

Single-detector maps

We provide de-polarized single-detector maps for all polarized Planck frequencies. 545 and 857GHz single-detector maps are not actively corrected for polarization modulation, but the small level of unintentional polarization sensitivity in the detectors is suppressed using the destriping templates. Single-detector maps are not corrected for bandpass mismatch. 217-857GHz single-detector maps are binned at Nside=4096 to better sample the narrow beam. 1/f noise in the detector maps is suppressed by destriping the single detector TOD with the Madam destriper code. As a result, 1/f noise residuals are not correlated between the maps. Large-scale calibration is based on full frequency data and the associated errors are correlated.

A/B split maps

Earlier Planck releases included various data splits with different degrees of correlated systematics. Any time-domain split is vulnerable to detector mismatch (beam, bandpass, etc.) that is stable over time. Full-frequency gain and bandpass-mismatch corrections used in PR3 also introduced correlated errors in the split maps that were provided. NPIPE release includes one, maximally-independent split.


For frequencies with enough redundancy, the split is based on feedhorns. Since the Planck scan strategy does not allow polarized mapmaking with fewer than two non-redundant feedhorns, the 30 and 44 GHz data could not be split by horns. Instead, these frequency channels are split in time. A half-mission split would produce incomplete sky coverage for the second half of LFI, so we use alternating years instead. Since the NPIPE A/B split is not purely time or detector set, the maps in the PLA are assigned different identifiers, as summarized below.

Frequency [GHz] Subset A Subset B
30 Years 1, 3 Years 2, 4
44 Years 1, 3 Years 2, 4
70 Feedhorns 18, 20, 23 Feedhorns 19, 21, 22
100 Feedhorns 1, 4 (ds1) Feedhorns 2, 3 (ds2)
143 Feedhorns 1, 3, 5, 7 (ds3) Feedhorns 2, 4, 6 (ds4)
217 Feedhorns 1, 3, 5, 7 (ds3) Feedhorns 2, 4, 6, 8 (ds4)
353 Feedhorns 1, 3, 5, 7 (ds3) Feedhorns 2, 4, 6, 8 (ds4)
545 Feedhorn 1 (ds2) Feedhorns 2, 4 (ds3)
857 Feedhorns 1, 3 (ds3) Feedhorns 2, 4 (ds4)

The locations of the feedhorns are indicated in the following Figure.

Planck feedhorn positions

Physical properties of the frequency maps are indicated in the following table:

Nominal frequency [GHz] Eff. freq. [GHz] in T, alpha=-1a Eff. freq. [GHz] in P, alpha=-1b Eff. freq. [GHz] in T, alpha=4c Eff. freq. [GHz] in P, alpha=4 Approx. resolution [arc min]d Average T noise [uK-arcmin]e Average P noise [uK-arcmin]f Calibration uncertainty [%]g
30A 28.27 ± 0.03 same as T 29.22 ± 0.04 same as T 31.5 256 511 0.064
30B 28.27 ± 0.03 same as T 29.22 ± 0.04 same as T 31.5 255 510 0.064
44A 43.94 ± 0.04 same as T 44.69 ± 0.03 same as T 27.1 292 611 0.057
44B 43.94 ± 0.04 same as T 44.69 ± 0.03 same as T 27.1 290 610 0.057
70A 70.09 ± 0.05 same as T 72.23 ± 0.05 same as T 13.0 259 540 0.043
70B 69.86 ± 0.05 same as T 72.10 ± 0.05 same as T 12.7 256 545 0.042
100A 100.41 ± 0.12 100.40 ± 0.12 106.16 ± 0.09 106.15 ± 0.09 9.50 137 294 0.039
100B 100.27 ± 0.61 100.27 ± 0.61 105.92 ± 0.67 105.91 ± 0.68 9.44 97.0 202 0.027
143A 141.65 ± 0.02 140.44 ± 0.02 149.56 ± 0.02 148.62 ± 0.02 7.17 42.8 140 0.024
143B 141.14 ± 0.02 140.99 ± 0.02 149.12 ± 0.02 149.03 ± 0.02 7.13 48.6 127 0.027
217A 220.248 ± 0.006 219.284 ± 0.008 230.848 ± 0.006 230.278 ± 0.008 4.83 73.2 186 0.033
217B 220.064 ± 0.006 219.160 ± 0.008 230.523 ± 0.006 229.850 ± 0.007 4.84 76.0 200 0.035
353A 357.571 ± 0.006 356.622 ± 0.007 371.950 ± 0.006 371.320 ± 0.006 4.75 322 751 0.060
353B 359.141 ± 0.006 358.517 ± 0.006 373.572 ± 0.007 372.357 ± 0.006 4.78 321 869 0.060
545A 554.398 ± 0.013 n/a 579.132 ± 0.004 n/a 4.75 5562 n/a 0.679
545B 551.162 ± 0.008 n/a 575.531 ± 0.005 n/a 4.56 4706 n/a 0.574
857A 857.886 ± 0.025 n/a 894.914 ± 0.032 n/a 4.22 394000 n/a 5
857B 850.364 ± 0.008 n/a 887.862 ± 0.009 n/a 4.25 417000 n/a 5

a Effective central frequency for a synchrotron-like emission. LFI uncertainties are based on a flat 30% uncertainty in each bandpass bin. HFI uncertainties use estimated statistical uncertainties in each bin.

b Polarized central frequency differs from temperature for HFI because of the non-ideal polarization sensitivity.

c Effective central frequency for a thermal dust-like emission.

d Approximate resolution is measured by fitting a Gaussian beam model to the QuickPol beam window function for intensity.

e Average noise depth is measured as the standard deviation of the simulated residual maps and includes statistical and systematic elements. Planck noise is not uniformly distributed: this value overestimates the depth near the Ecliptic poles and underestimates the depth at the Ecliptic equator. The noise is also scale-dependent, causing the depth to change in a non-trivial manner when downgrading or smoothing the maps.

f Polarized noise depth is the length of the [Q, U] error vector, not the individual Q or U uncertainty.

g Overall calibration uncertainty is based on the full frequency results in Table 7 of A&A 643, A42 (2020) and scaled to the subset map noise depth. 857GHz calibration uncertainty continues to be dominated by a 5% planetary emission model uncertainty.

File names

The FITS filenames are of the form {H|L}FI_SkyMap_fff{-tag}_Nside_R4.nn_{coverage}-{type}.fits, where "fff" are three digits to indicate the Planck frequency band, "tag" indicates the single detector or the detset (no "tag" indicates full channel), "Nside" is the HEALPix Nside value of the map, "coverage" indicates which part of the mission is covered (full, half-mission, survey, year, etc.), and the optional "type" indicates the subset of input data used. The table below lists the products by type, with the appropriate unix wildcards that form the full filename.

Frequency map FITS filenames
Coverage Filename
Full-channel, full-mission ?FI_SkyMap_fff{-tag}_????_R4.??_full.fits
Full-channel, full-mission, half-ring ?FI_SkyMap_fff{-tag}_????_R4.??_full-ringhalf-{1|2}.fits
Subset A maps, 30 and 44GHz ?FI_SkyMap_fff_1024_R4.??_year-1-3.fits
Subset B maps, 30 and 44GHz ?FI_SkyMap_fff_1024_R4.??_year-2-4.fits
Subset A maps, 70GHz LFI_SkyMap_070-18-20-23_1024_R4.??_full.fits
Subset B maps, 70GHz LFI_SkyMap_070-19-21-22_1024_R4.??_full.fits
Subset A maps, 100GHz HFI_SkyMap_100-ds1_2048_R4.??_full.fits
Subset B maps, 100GHz HFI_SkyMap_100-ds2_2048_R4.??_full.fits
Subset A maps, 143GHz HFI_SkyMap_143-ds3_2048_R4.??_full.fits
Subset B maps, 143GHz HFI_SkyMap_143-ds4_2048_R4.??_full.fits
Subset A maps, 217GHz HFI_SkyMap_217-ds3_2048_R4.??_full.fits
Subset B maps, 217GHz HFI_SkyMap_217-ds4_2048_R4.??_full.fits
Subset A maps, 353GHz HFI_SkyMap_353-ds3_2048_R4.??_full.fits
Subset B maps, 353GHz HFI_SkyMap_353-ds4_????_R4.??_full.fits
Subset A maps, 545GHz HFI_SkyMap_545-ds2_????_R4.??_full.fits
Subset B maps, 545GHz HFI_SkyMap_545-ds3_????_R4.??_full.fits
Subset A maps, 857GHz HFI_SkyMap_857-ds3_????_R4.??_full.fits
Subset B maps, 857GHz HFI_SkyMap_857-ds4_????_R4.??_full.fits
Single-detector maps ?FI_SkyMap_{detector}_????_R4.??_full.fits


FITS file structure

The FITS files for the sky maps contain a minimal primary header with no data, and a BINTABLE extension (EXTENSION 1, EXTNAME = FREQ-MAP) containing the data. The structure is shown schematically in the figure below. The FREQ-MAP extension contains a 3- or 10-column table that includes the signal, hit-count, and variance maps, all in HEALPix format. The 3-column case is for intensity-only maps, while the 10-column case is for polarization. The number of rows is the number of map pixels, which is Npix = 12 Nside2 for HEALPix maps, where Nside = 1024 or 2048 for most of the maps presented in this section.

FITS file structure.

Note that file sizes are approximately 0.6 GB for I-only maps and 1.9 GB for IQU maps at Nside=2048, but about 0.14 GB for I-only maps and 0.45 GB for IQU maps at Npix=1024 .

Keywords indicate the coordinate system ("GALACTIC"), the HEALPix ordering scheme ("NESTED"), the units (KCMB of each column, and of course the frequency channel ("FREQ"). Where polarization Q and U maps are provided, the "COSMO" polarization convention (used in HEALPix) is adopted, and it is specified in the "POLCCONV" keyword. The original filename is also given in the "FILENAME" keyword. The "BAD_DATA" keyword gives the value used by HEALPix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The main parameters are summarized in the table below.

Sky map file data structure
1. EXTNAME = 'FREQ-MAP' : Data columns
Column name Data type Units Description
I_STOKES Real*4 KCMB Stokes I map
Q_STOKES Real*4 KCMB Stokes Q map (optional)
U_STOKES Real*4 KCMB Stokes U map (optional)
HITS Int*4 none The hit-count map
II_COV Real*4 KCMB2 II variance map
IQ_COV Real*4 KCMB2 IQ variance map (optional)
IU_COV Real*4 KCMB2 IQ variance map (optional)
QQ_COV Real*4 KCMB2 QQ variance map (optional)
QU_COV Real*4 KCMB2 QU variance map (optional)
UU_COV Real*4 KCMB2 UU variance map (optional)
Keyword Data type Value Description
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
POLCCONV String COSMO Polarization convention
NSIDE Int 1024 or 2048 HEALPix Nside
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 12 Nside2 – 1 Last pixel number
FREQ String nnn Frequency channel


The same structure applies to all "SkyMap" products, independent of whether they are full channel, survey of half-ring. The distinction between the types of map is present in the FITS filename (and in the traceability comment fields).


2015 Sky temperature and polarization maps


General description

Sky maps give the best estimate of the intensity and polarization (Stokes Q and U components), if available, of the signal from the sky after removal, as far as possible, of known systematic effects (mostly instrumental, but including also the solar and earth-motion dipole, Galactic strylight and the Zodiacal light). Sky maps are provided for the full Planck mission using all valid detectors in each frequency channel, and also for various subsets by splitting the mission in various time ranges or in subsets of the detectors in a given channel. These products are useful for the study of source variability, but they are especially interesting for characterisation purposes (see also the data validation section). The details of the start and end of the time ranges are given in the table below.

To help in further processing, there are also masks of the Galactic Plane and of point sources, each provided for several different depths.

All sky maps are in Healpix format, with Nside of 1024 (LFI 30, 44 and 70) and 2048 (LFI 70 and HFI), in Galactic coordinates, and Nested ordering.

WARNING
the Healpix convention for polarization is NOT the same as the IAU convention - see Section 8 in this page.

The signal is given in units of Kcmb for 30-353 GHz, and of MJy/sr (for a constant [math]\nu F_\nu[/math] energy distribution ) for 545 and 857 GHz. For each frequency channel, the intensity and polarization maps are packaged into a BINTABLE extension of a FITS file together with a hit-count map (or hit map, for short, giving the number of observation samples that are cumulated in a pixel, all detectors combined) and with the variance and covariance maps. Additional information is given in the FITS file header. The structure of the FITS file is given in the FITS file structure section below.

R2.00 
this first release (Jan 2015) contains polarisation data for the 353 GHz channel only.
R2.01 
this second release (May 2015) adds polarisation data to the 100-217 GHz channels.
R2.02 
a full re-release to correct the Healpix bad pixel value in the maps which was altered during the preparation of the maps and not reset to the correct value (the valid pixels are unchanged). It also fixes some FITS keywords, and includes a full re-release of the Zodi correction maps, with the 100-217 GHz one now including the polarisation correction)
Ranges for mission and surveys
Range ODs HFI rings pointing-IDs Comment
nominal mission 91 - 563 240 - 14723 00004200 - 03180200
full mission 91 - 974 240 - 27005 00004200 - 05322620 for HFI
full mission 91 - 1543 n/a 00004200 - 06511160 for LFI
Survey 1 91 - 270 240 - 5720 00004200 - 01059820
Survey 2 270 - 456 5721 - 11194 01059830 - 02114520
Survey 3 456 - 636 11195 - 16691 02114530 - 03193660
Survey 4 636 - 807 16692 - 21720 03193670 - 04243900
Survey 5 807 - 974 21721 - 27005 05267180 - 05322590 end of mission for HFI
Survey 5 807 - 993 n/a 05267180 - 06344800 end of survey for LFI
Survey 6 993 - 1177 n/a 06344810 - 06398120 LFI only
Survey 7 1177 - 1358 n/a 06398130 - 06456410 LFI only
Survey 8 1358 - 1543 n/a 06456420 - 06511160 LFI only
Survey 9 1543 - 1604 n/a 06511170 - 06533320 LFI only Not in this delivery
HFI mission-half-1 91 - 531 240 - 13471 00004200 - 03155580
HFI mission-half-2 531 - 974 13472 - 27005 03155590 - 05322590
LFI Year 1 91 - 456 n/a 00004200 - 02114520
LFI Year 2 456 - 807 n/a 02114530 - 04243900
LFI Year 3 807 - 1177 n/a 05267180 - 06398120
LFI Year 4 1177 - 1543 n/a 06398130 - 06511160

Production process

Sky maps are produced by combining appropriately the data of all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarised) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system. In particular, they include the Zodiacal light emission (Zodi for short) and also the scattering from the far-side lobes of the beams (FSL). More on this below.

HFI processing

The mapmaking and calibration process is described in detail in the Map-making section and in the Planck-2015-A08[1] paper, where detailed references are found. In brief it consists of:

binning the TOI data onto rings 
Healpix rings (HPRs) are used here, each ring containing the combined data of one pointing period.
flux calibration 
at 100-353 GHz, the flux calibration factors are determined by correlating the signal with the orbital dipole, which is determined very accurately from the Planck satellite orbital parameters provided by Flight Dynamics. This provides a single gain factor per bolometer. At 545 and 857 GHz the gain is determined from the observation of Uranus and Neptune (but not Jupiter which is too bright) and comparison to recent models made explicitly for this mission. A single gain is applied to all rings at these frequencies.
destriping 
in order to remove low-frequency noise, an offset per ring is determined by minimizing the differences between HPRs at their crossings, and removed.
Zodiacal light correction 
a Zodiacal light model is used to build HPRs of the the Zodi emission, which is subtracted from the calibrated HPRs.
projection onto the map 
the offset-corrected, flux-calibrated, and Zodi-cleaned HPRs are projected onto Healpix maps, with the data of each bolometer weighted by a factor of 1/NET of that bolometer.

These steps are followed by some post-processing which is designed to prepare the maps for the component separation work. This post processing consists of:

Dust bandpass leakage correction 
the Q and U maps are corrected for the intensity-to-polarisation leakage caused by the foregrounds having a non-CMB spectrum, and as a consequence of the non-identical bandpasses on the different detectors (bandpass mismatch, or BPM). This correction is determined using the ground method as described in Section 7.3 of Planck-2015-A08[1]. These correction maps can be found in the Planck Legacy Archive as HFI_CorrMap_???-dustleak-ground_2048_R2.0?_{coverage}.fits. The correction is applied by subtracting the correction map from the corresponding input map. This correction is not applied to the nominal mission maps in order to maintain compatibility with the PR1 products. In fact this correction was computed and applied only to the products used in component separation, so they were not applied to the single survey maps and to the half-ring maps, which are considered characterisation products.
Far Side Lobe calibration correction 
the 100-217 maps are multiplied by factors of 1.00087, 1.00046, and 1.00043, respectively, to compensate for the non-removal of the far-side lobes, and similarly the corresponding covariance maps have also been corrected by multiplication by the square of the factor.
Fill missing pixels 
missing pixels are filled in with a value that is the mean of valid pixels within a given radius. A radius of 1 deg is used for the full channel maps, and 1.5 deg is used for the detset maps. This step is not applied to the single survey maps since they have large swaths of the sky that are not covered.
Map zero-level 
for the 100 to 857 GHz maps, the zero levels are set to their optimal levels for Galactic and CIB studies. A procedure for adjusting them to astrophysical values is given in the HFI Mapmaking and Calibration paper Planck-2015-A08[1].

These maps provide the main mission products. Together with signal maps, hit count, variance, and variance maps are also produced. The hit maps give the (integer) number of valid TOI-level samples that contribute to the signal of each pixel. All valid samples are counted in the same way, i.e., there is no weighting factor applied. The variance maps project the white noise estimate, provided by the NETs, in the sky domain.

Note that the nominal mission maps have not had the post-processing applied, which makes them more easily comparable to the PR1 products.

LFI processing LFI maps were constructed with the Madam map-making code, version 3.7.4. The code is based on generalized destriping technique, where the correlated noise component is modeled as a sequence of constant offset, called baselines. A noise filter was used to constrain the baseline solution allowing the use of 0.25 s and 1 second baselines for the 30 and 44, 70 GHz respectively.

Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The used weights are listed in Map-making. The flagged samples were excluded from the analysis by setting their weights to [math]C_{w}^{-1}[/math] = 0. The galaxy region was masked out in the destriping phase, to reduce error arising from strong signal gradients. The polarization component was included in the analysis...

Dipole and Far Side Lobe correction 
input timelines are cleaned by 4pi convolved dipole and Galactic Straylight obtained as convolution of the 4pi in band far sidelobes and Galactic Simulation as explained in Section 7.4 of Planck-2015-A02[2].

Beam effects on the LFI maps are described in Section 7.1 of Planck-2015-A02[2]. Scaling of the maps due to beam effects is taken into account in the LFI's beam functions (as provided in the RIMO, give reference) which should be used for analysis of diffuse components. To compute the flux densities of compact sources, correction must be made for beam effects (see Table 8 of Planck-2015-A02[2])."

Bandpass leakage correction 
as opposed to the HFI, the LFI high resolution maps have not been corrected for bandpass leakage. Only low resolution (nside 256) maps are provided with the bandpass correction. The correction maps (LFI_CorrMap_0??-BPassCorr_*.fits) can be found in the Planck Legacy Archive. Further details about the procedure used to generate the bandpass correction maps can be found in Section 11 of Planck-2015-A02[2].
Map zero-level 
for the 30, 44 and 70 GHz, maps are corrected for zero level monopole by applying an offset correction, see LFI Calibration paper Planck-2015-A05[3]. Note that the offset applied is indicated in the header as a comment keyword.

A detailed description of the map-making procedure is given in Planck-2013-II[4], Planck-2015-A02[2], Planck-2015-A06[5] and in section Map-making.

Types of maps

Full mission, full channel maps (6 HFI, 4 LFI)

Full channel maps are built using all the valid detectors of a frequency channel and cover the either the full or the nominal mission. For HFI, the 143-8 and 545-3 bolometers are rejected entirely as they are seriously affected by RTS noise. HFI provides the Q and U components for the 100, 143, 217 and 353 GHz channels only. LFI provides the I, Q and U maps for all the channels. Reminder: HFI Q and U maps are corrected for bandpass leakage but LFI Q and U maps are not. The I, Q and U maps are displayed in the figures below. The color range is set using a histogram equalisation scheme (from HEALPIX) that is useful for these non-Gaussian data fields. For visualization purposes, the Q and U maps shown here have been smoothed with a 1 degree Gaussian kernel, otherwise they look like noise to the naked eye. The 70 GHz full map is available also at [math]N_{side}[/math] 2048.



Full mission light maps, full channel maps (6 HFI, 7 LFI)

These maps are based on the Full mission maps but contain fewer columns, IQU from 30 to 353 GHz, and I only at 545 and 857 GHz. These maps have been produced to reduce the transfer time of the most downloaded frequency full mission maps.

Nominal mission, full channel maps (6 HFI)

These maps are similar to the ones above, but cover the nominal mission only. They are meant primarily to be compared to the PR1 products in order to see the level of improvements in the processing. Because of this, they are produced in Temperature only, and have not had the post-processing applied.

Single survey, full channel maps (30 HFI, 35 LFI)

Single survey maps are built using all valid detectors of a frequency channel; they cover separately the different sky surveys. The surveys are defined as the times over which the satellite spin axis rotates but 180 degrees, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between ~80 and 90% depending on detector position. During adjacent surveys the sky is scanned in opposite directions. More precisely it is the ecliptic equator that is scanned in opposite directions. While these are useful to investigate variable sources, they are also used to study the systematics of the time-response of the detectors as they scan bright sources, like the Galactic Plane, in different directions during different survey. Note that the HFI and LFI missions cover 5 and 8 surveys, respectively, and in case of HFI the last survey in incomplete. The 70 GHz surveys maps are available also at [math]N_{side}[/math] 2048. Note LFI provide a special surveys maps combination used in the low l analysis. This maps, available at the three LFI frequency 30, 44 and 70 GHz, was built using the combination of survey 1, 3, 5, 6, 7 and 8.

Year maps, full channel maps (12 HFI, 16 LFI)

These maps are built using the data of surveys 1+2, surveys 3+4, and so forth. They are used to study long-term systematic effects. The 70 GHz years maps are available also at [math]N_{side}[/math] 2048.

Half-mission maps, full channel maps (12 HFI, 12 LFI)

For HFI, the half mission is defined after eliminating those rings discarded for all bolometers. There are 347 such rings, may of which are during the 5th survey when the End-of-Life tests were performed. The remaining 26419 rings are divided in half (up to the odd ring) to define the two halves of the mission. This exercise is done for the full mission only.

For LFI instead of the half-mission the following year combination has been created: Year 1+2, Year 1+3, Year 2+4, Year 3+4,

Full mission, single detector maps (18 HFI, 22 LFI)

IN case of HFI these maps are built only for the SWBs (non polarized) and contain only temperature data, of course. They are not built for the polarisation sensitive detectors because they are not fixed on the sky as the polarisation component depends on the position angle at the time of observation. Instead, we provide maps built by quads of polarisation-sensitive detectors (see next section), which have different polarisation angles and that can be used to built I, Q, and U maps

HFI Temperature sensitive bolometers
Frequency Detector names
143 GHz 143-5, 6, 7
217 GHz 217-1, 2, 3, 4
353 GHz 353-1, 2, 7, 8
545 GHz 545-1, 2, 4
857 GHz 857-1, 2 , 3, 4

The 143-8 and 353-3 bolometer data are affected by strong RTS (random telegraphic signal) noise. They have not been used in the data processing, and are not delivered. For a figure showing the focal plane layout, see this Introduction of the Detector Pointing chapter.

In case of LFI, all the 22 Radiometers maps are available, those, obviously, are only in temperature.

Full mission, detector set or detector pairs maps (8 HFI, 8 LFI)

The objective here is to build independent temperature (I) and polarisation (Q and U) maps with the two pairs of polarisation sensitive detectors of each channel where they are available, i.e. in the 44-353 GHz channels. The table below indicates which detectors were used to built each detector set (detset).


Definition of HFI Detector Sets
Frequency DetSet1 DetSet2
100 GHz 100-1a/b & 100-4a/b 100-2a/b & 100-3a/b
143 GHz 143-1a/b 1 & 43-3a/b 143-2a/b & 143-4a/b
217 GHz 217-5a/b & 217-7a/b 217-6a/b & 217-8a/b
353 GHz 353-3a/b & 353-5a/b 353-4a/b & 353-6a/b
Definition of LFI Detector Pairs
Frequency Horn Pair Comment
44 GHz 24 This maps is only in temperature
44 GHz 25 & 26
70 GHz 18 & 23 Available also at [math]N_{side}[/math] = 2048
70 GHz 19 & 22 Available also at [math]N_{side}[/math] = 2048
70 GHz 20 & 21 Available also at [math]N_{side}[/math] = 2048


Half-ring maps (64 HFI, 62 LFI)

These maps are similar to the ones above, but are built using only the first or the second half of each ring (or pointing period). The HFI provides half-ring maps for the full mission only, and for the full channel, the detsets, and the single bolometers. The LFI provides half-rings maps for the channel full mission (70 GHz also at [math]N_{side}[/math] 2048), for the radiometer full mission and the horn pairs full mission.

The Zodiacal light correction maps

The Zodiacal light signal depends on the location of the observer relative to the Zodiacal light bands, and thus it is not a fixed pattern on the sky but depends on the period of observation. The maps presented here are the difference between the uncorrected (and not delivered) and the corrected maps.

Note that while the Zodiacal light model that is subtracted at ring level (see here) is not polarised, the corrections are not null and Q and U. This is suspected to come from some combination of leakage due to bandpass differences and beam mismatch, and maybe other effects. These leakages are typically of order a few %, at max, of the maximum zodi intensity at I for each channel. They range from ~150 nK at 100 GHz to ~5 uK at 353 GHz.

Caveats and known issues

HFI polarization 100-217 GHz 
at low multipoles, despite the progress that has been made to control the systematic effects present in the maps, polarization data between 100-217 GHz are still contaminated by systematic residuals. Figure 10 of Planck-2015-A08[1] shows the EE power spectra from the half-difference maps at 100, 143, and 217 GHz and compared to the noise power spectrum from FFP8 simulations. he half-ring differences are compatible with noise while, at multipoles typically lower than 50, detector-set and half-mission differences are dominated by excess power which is larger than the EE CMB signal. The Planck Collaboration has used the range ell>30 to carry out component separation (Planck-2015-A09[6]), as data at ell<30 is not considered usable for cosmological analyses. The origin of the excess power will be explored in a forthcoming publication.


Inputs HFI inputs

The HFI mapmaking takes as input:

  • the cleaned TOIs of signal of each detector, together with their flags, produced by the TOI processing pipeline;
  • the TOIs of pointing (quaternions), described in Detector pointing;
  • bolometer-level characterization data, from the DPC's internal IMO (not distributed);
  • Planck orbit data, used to compute and remove the Earth's dipole;
  • Planck solar dipole information, used to calibrate the CMB channels;
  • Planet models used to calibrate the Galactic channels.

LFI inputs

The Madam mapmaker takes as input:

  • the calibrated timelines (for details see TOI Processing);
  • the detector pointings (for details see Detector pointing);
  • the noise information in the form of 3-parameter (white noise level, σ, slope, and knee frequency, fknee) noise model (for details see RIMO)

Related products Masks

This section presents the masks of the point sources and of the Galactic plane. These are general purpose masks. Other masks specific to certain products are packaged with the products.

Point source masks

For HFI and LFI two sets of masks are provided:

  • Intensity masks, which removes sources detected with SNR > 5.
  • Polarisation masks, which remove sources which have polarisation detection significance of 99.97 % or greater at the position of a source detected in intensity. They were derived from the polarisation maps with dust ground bandpass mismatch leakage correction applied. The cut around each source has a radius of 3σ (width) of the beam ~ 1.27 FWHM (for LFI the cut around each source has a radius of 32 arcmin at 30GHz, 27 arcmin at 44 GHz and 13 arcmin at 70 GHz).

Both sets are found in the files HFI_Mask_PointSrc_2048_R2.00.fits and LFI_Mask_PointSrc_2048_R2.00.fits in which the first extension contains the Intensity masks, and the second contains the Polarisation masks.

Galactic plane masks

Eight masks are provided giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage derived from the 353 GHz map, after CMB subtraction. They are independent of frequency channel. Three versions of these are given: not apodized, and apodized by 2 and 5 deg. The filenames are HFI_Mask_GalPlane-apoN_2048_R2.00.fits, where N = 0, 2, 5.

The masks are shows below. The 8 GalPlane masks are combined (added together) and shown in a single figure for each of the three apodization. While the result is quite clear for the case of no apodization, it is less so for the apodized case. The point source masks are shown separately for the Intensity case.

File names The FITS filenames are of the form {H|L}FI_SkyMap_fff{-tag}_Nside_R2.nn_{coverage}-{type}.fits, where fff are three digits to indicate the Planck frequency band, tag indicates the single detector or the detset, Nside is the Healpix Nside of the map, coverage indicates which part of the mission is covered (full, half mission, survey, year, ...) , and the optional type indicates the subset of input data used. The table below lists the products by type, with the appropriate unix wildcards that form the full filename.

HFI FITS filenames
Coverage filename half-ring filename
Full chan, full mission HFI_SkyMap_???_2048_R2.??_full.fits HFI_SkyMap_???_2048_R2.??_full-ringhalf-?.fits
Full channel, nominal mission HFI_SkyMap_???_2048_R2.??_nominal.fits n/a
Full channel, single survey HFI_SkyMap_???_2048_R2.??_survey-?.fits n/a
Full channel, single year HFI_SkyMap_???_2048_R2.??_year-?.fits n/a
Full channel, half mission HFI_SkyMap_???_2048_R2.??_halfmission*-?.fits n/a
Det-set, full mission HFI_SkyMap_???-ds?_2048_R2.??_full.fits HFI_SkyMap_???-ds?_2048_R2.??_full-ringhalf-?.fits
Single SWB, full mission HFI_SkyMap_???-?_2048_R2.??_full.fits HFI_SkyMap_???-?_2048_R2.??_full-ringhalf-?.fits
LFI FITS filenames
Coverage filename half-ring filename Comment
Full channel, full mission LFI_SkyMap_???_1024_R2.??_full.fits LFI_SkyMap_???_1024_R2.??_full-ringhalf-?.fits Available also at Nside = 2048
Full channel, single survey LFI_SkyMap_???_1024_R2.??_survey-?.fits n/a Available also at Nside = 2048
Full channel, survey combination LFI_SkyMap_???_1024_R2.??_survey-1-3-5-6-7-8.fits n/a n/a
Full channel, single year LFI_SkyMap_???_1024_R2.??_year-?.fits n/a Available also at Nside = 2048
Full channel, year combination LFI_SkyMap_???_1024_R2.??_year?-?.fits n/a n/a
Horn pair, full mission LFI_SkyMap_???-??-??_1024_R2.??_full.fits LFI_SkyMap_???_??-??_1024_R2.??_full-ringhalf-?.fits Available also at Nside = 2048
Single radiometer, full mission LFI_SkyMap_???-???_1024_R2.??_full.fits LFI_SkyMap_???-???_1024_R2.??_full-ringhalf-?.fits n/a


For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the 9 frequency maps as separate columns in a single extension. The 9 columns in this file contain the intensity maps ONLY and no other information (hit maps and variance maps) is provided.


FITS file structure

The FITS files for the sky maps contain a minimal primary header with no data, and a BINTABLE extension (EXTENSION 1, EXTNAME = FREQ-MAP) containing the data. The structure is shows schematically in the figure below. The FREQ-MAP extension contains a 3- or a 10-column table that contain the signal, hit-count and variance maps, all in Healpix format. The 3-column case is for intensity only maps, the 10-column case is for polarisation. The number of rows is the number of map pixels, which is Npix = 12 [math]N_{side}[/math]2 for Healpix maps, where [math]N_{side}[/math] = 1024 or 2048 for most the maps presented in this chapter.

FITS file structure

Note that file sizes are ~0.6 GB for I-only maps and ~1.9 GB for I,Q,U maps at [math]N_{side}[/math] 2048 and ~0.14 GB for I-only maps and ~0.45 GB for I,Q,U maps at [math]N_{side}[/math] 1024 .

Keywords indicate the coordinate system (GALACTIC), the Healpix ordering scheme (NESTED), the units (K_cmb or MJy/sr) of each column, and of course the frequency channel (FREQ). Where polarisation Q and U maps are provided, the COSMO polarisation convention (used in HEALPIX) is adopted, and it is specified in the POLCCONV keyword (see this section. The COMMENT fields give a one-line summary of the product, and some other information useful for traceability within the DPCs. The original filename is also given in the FILENAME keyword. The BAD_DATA keyword gives the value used by Healpix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The main parameters are summarised below:


Sky map file data structure
1. EXTNAME = 'FREQ-MAP' : Data columns
Column Name Data Type Units Description
I_STOKES Real*4 K_cmb or MJy/sr The Stokes I map
Q_STOKES Real*4 K_cmb or MJy/sr The Stokes Q map (optional)
U_STOKES Real*4 K_cmb or MJy/sr The Stokes U map (optional)
HITS Int*4 none The hit-count map
II_COV Real*4 K_cmb2 or (MJy/sr)2 The II variance map
IQ_COV Real*4 K_cmb2 or (MJy/sr)2 The IQ variance map (optional)
IU_COV Real*4 K_cmb2 or (MJy/sr)2 The IQ variance map (optional)
QQ_COV Real*4 K_cmb2 or (MJy/sr)2 The QQ variance map (optional)
QU_COV Real*4 K_cmb2 or (MJy/sr)2 The QU variance map (optional)
UU_COV Real*4 K_cmb2 or (MJy/sr)2 The UU variance map (optional)
Keyword Data Type Value Description
PIXTYPE string HEALPIX
COORDSYS string GALACTIC Coordinate system
ORDERING string NESTED Healpix ordering
POLCCONV String COSMO Polarization convention
NSIDE Int 1024 or 2048 Healpix [math]N_{side}[/math]
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 12 [math]N_{side}[/math]2 – 1 Last pixel number
FREQ string nnn The frequency channel


The same structure applies to all SkyMap products, independent of whether they are full channel, survey of half-ring. The distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).

Polarization convention used in the Planck project

The Planck collaboration used the COSMO convention for the polarization angle (as usually used in space based CMB missions), whereas other astronomical fields usually use the IAU convention. In the following document we report the difference between these two conventions, and the consequence if it is NOT taken into account correctly in the analysis.

Figure 1. COSMO convention (left) and IAU convention (right). The versor [math]\hat{z}[/math] points outwards the pointing direction in COSMO, and inwards in IAU. The bottom panel refers to the plane tangent to the sphere.

Changing the orientation convention is equivalent to a transformation [math]\psi'=\pi-\psi[/math] of the polarization angle (Figure 1). The consequence of this transformation is the inversion of the Stokes parameter [math]U[/math]. The components of the polarization tensor in the helicity basis [math]\epsilon^{\pm}=1/\sqrt{2}(\hat{x}\pm i\hat{y})[/math] are:

[math] (Q+iU)(\hat{n}) = \sum _{\ell m}a_{2,lm}{}_{2}Y_{\ell }^{m}(\hat{n}) \\(Q-iU)(\hat{n}) = \sum _{\ell m}a_{-2,lm}{}_{2}Y_{\ell }^{m}(\hat{n}) [/math]

where [math]{}_{2}Y_{\ell }^{m}(\hat{n})[/math] are the spin weighted spherical harmonic functions. The [math]E[/math] and [math]B[/math] modes can be defined as: [math] E(\hat{n}) = \sum_{\ell m}a_{E,\ell m}Y_{\ell }^{m}(\hat{n}) \\B(\hat{n}) = \sum_{\ell m}a_{B,\ell m}Y_{\ell }^{m}(\hat{n}) [/math]

where the coefficients [math]a_{E,\ell m}[/math] and [math]a_{B,\ell m}[/math] are derived from linear combinations of the [math]a_{2,\ell m}[/math] , [math]a_{-2,\ell m}[/math] defined implicitly in the first equation ([math]Q\pm iU[/math]).

Test gradient.jpg
Figure 2. Error on Planck-LFI 70 GHz [math]EE[/math] (top) and [math]BB[/math] (bottom) spectra, in case of wrong choice of the coordinate system convention (IAU instead of COSMO).

The effect of the sign inversion of [math]U[/math] on the polarization spectra is a non trivial mixing of [math]E[/math] and [math]B[/math] modes.

An example of the typical error on [math]EE[/math] and [math]BB[/math] auto-spectra in case of a wrong choice of the polarization basis is shown in Figure 2.

BE CAREFUL about the polarization convention you are using. If the IAU convention is used in computing the power spectra, the sign of the [math]U[/math] component of the Planck maps must be inverted before computing [math]E[/math] and [math]B[/math] modes.

Note on the convention used by the Planck Catalogue of Compact Sources (PCCS) For continuity with other compact sources catolgues, the Catalogue of Compact Sources provided by Planck follows the IAU convention, and the polarization angles are defined on an interval of [-90°,90°]. To switch to the COSMO convention, the polarization angles listed in the catalogue have to be shifted by 90° and multiplied by -1.

References[edit]

  1. 1.01.11.21.3 Planck 2015 results. VIII. High Frequency Instrument data processing: Calibration and maps, Planck Collaboration, 2016, A&A, 594, A8.
  2. 2.02.12.22.32.4 Planck 2015 results. II. LFI processing, Planck Collaboration, 2016, A&A, 594, A2.
  3. Planck 2015 results. V. LFI calibration, Planck Collaboration, 2016, A&A, 594, A5.
  4. Planck 2013 results. II. Low Frequency Instrument data processing, Planck Collaboration, 2014, A&A, 571, A2.
  5. Planck 2015 results. VI. LFI mapmaking, Planck Collaboration, 2016, A&A, 594, A6.
  6. Planck 2015 results. XI. Diffuse component separation: CMB maps, Planck Collaboration, 2016, A&A, 594, A9.

2013 Sky temperature maps

General description


Sky maps give the best estimate of the intensity of the signal from the sky after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system. Sky maps are provided for the nominal Planck mission and also, separately, for the first two single surveys, the third one being covered only for a small part during the nominal mission.The details of the start and end times of each are given in this table. As a secondary product, maps with estimates of the Zodiacal light and Far-Side-Lobes contribution removed are also provided.

For characterization purposes, are also provided maps covering the nominal survey but each one using only half of the available data. These are the ringhalf_{1|2} maps, which are built using the first and second half of the stable pointing part in each pointing period. These maps are used extensively to investigate the (high frequency) noise properties the maps themselves and of other products described elsewhere (see e.g., the data validation section).

To help in further processing, there are also masks of the Galactic Plane and of point sources, each provided for several different depths.

All sky maps are in Healpix format, with Nside of 2048 for HFI and of 1024 for LFI (note that the LFI 70 GHz has been delivered also at Nside of 2048 to be directly comparable with HFI maps), in Galactic coordinates, and Nested ordering. The signal is given in units of Kcmb for 30-353 GHz, and of MJy/sr (for a constant $\nu F_\nu$ energy distribution ) for 545 and 857 GHz. Each sky map is packaged into a BINTABLE extension of a FITS file together with a hit-count map (or hit map, for short, giving the number of observation samples that are cumulated in a pixel, all detectors combined) and a variance map (determined from the half-ring maps), and additional information is given in the FITS file header. The structure of the FITS file is given in the FITS file structure section below.


Types of maps

Full channel maps
Full channel maps are built using all the valid detectors of a frequency channel and cover the nominal mission. For HFI, the 143-8 and 545-3 bolometers are rejected entirely as they are seriously affected by RTS noise. The maps are displayed in the figures below. The range is the same from 30 - 143 GHz in order to show the CMB at the same level. At higher frequencies the range is increased in order to keep the Galactic Plane from invading the whole sky.
Single survey maps
Single survey maps are built using all valid detectors of a frequency channel; they cover separately the different sky surveys. The surveys are defined as the times over which the satellite spin axis rotates but 180 degrees, which, due to the position of the detectors in the focal plane does not cover the full sky, but a fraction between ~80 and 90% depending on detector position.
Detector set or detector pairs maps
These are maps built from a subset of the detectors in a frequency channel, typically our of two PSB pairs (i.e., four poloarisation-sensitive bolometers with different orientation on the sky), for HFI in order to extract a single temperature map. While none of these maps are part of the first Planck data release, the concept of detset is used, and thus it is worth mentioning it here. In particular, information by detector set is available at the sky power spectrum level and in the RIMO.
Half-ring maps
Half-ring maps are built using only the first or the second half of the stable pointing period data. There are thus two half-ring maps per frequency channel named ringhalf_1 and ringhalf_2 respectively. These maps are built for characterization purposes in order to perform null tests. In particular, the difference between the two half-ring maps at a given frequency give a good estimate of the high frequency noise in the data (albeit biased low by ~0.5% for the HFI channels due to specifics of the TOI processing).
Masks
Masks are provided of the Galactic Plane and of the point sources. For the Galactic Plane, eight masks are given covering different fractions of the sky, and for the points sources two masks are given, at the 5 and 10 sigma level, for each Planck HFI frequency channel. These are generic masks, specific masks applicable to other products are delivered with the products themselves.

Caveats and known issues

The primary limitation of the HFI maps are

  • the absence of correction of the ADC non-linearities,
  • the far-side lobe contribution is not accounted for in the processing and in the calibration,
  • the dipole removal is based on the non-relativistic approximation which leaves a weak quadrupole component in the map.

And thus the overall calibration accuracy is at the 0.2% level in 100-217 GHz channels

The LFI 70 GHz maps at Nside=2048 should be considered as additional product, the default are the LFI maps at Nside=1024. No effective beam at Nside=2048 is provided, only at Nside=1024, for this reason the use of the effective beam with maps at Nside 2048 is discouraged.

Map zero-level

For the 100 to 857 GHz maps, the zero levels are set to their optimal levels for Galactic and CIB studies. A procedure for adjusting them to astrophysical values is given in the HFI Calibration paper Planck-2013-VIII[1].

For the 30, 44 and 70 GHz, maps are corrected for zero level monopole by applying an offset correction, see LFI Calibration paper Planck-2013-V[2] section 3.4 "Setting the zero levels in the maps". Note that the offset applied is indicated in the header as a comment keyword.

The Zodiacal light and the Far-Side Lobes

The figures below show the modeled Zodiacal light and Far Side Lobes projected onto the maps; they are simply the difference between the main product and the ZodiCorrected maps for the nominal mission. The units are given in the figures. The heat color table has been used in place of the standard Planck for clarity reasons.

The effects of the FSLs are seen most clearly at the highest frequencies, as structures roughly symmetric about the center of the image, which corresponds to the location of the Galactic Centre, which is in turn the source of most of the radiation that is scattered into the FSLs.

Artifacts near caustics of the scanning strategy

The scanning strategy is such that regions around the Ecliptic poles are surveyed very deeply and compared to the average, and the transition from the nominal depth to the high depth, as shows on hit-count maps is very rapid, namely a few pixels, for a contrast of ~30. These transitions, or caustics in the maps, occur at different positions on the sky for different detectors, as the positions depend on their location in the focal plane of the instrument. As a result, when data from different detectors are combined to build a full channel map, the the weights of different detectors in the mix changes rapidly across the caustic, and given the remaining errors in the relative calibration of the detectors, a visible effect can be introduced in the maps, especially when the SNR is very high, i.e. at the highest frequencies and near bright regions like the Galactic Plane. Some examples are shown below.

Production process


Sky maps are produced by combining appropriately the data of all working detectors in a frequency channel over some period of the mission. They give the best estimate of the signal from the sky (unpolarised) after removal, as far as possible, of known systematic effects and of the dipole signals induced by the motion of the solar system in the CMB and of the Planck satellite in the solar system. In particular, they include the Zodiacal light emission (Zodi for short) and also the scattering from the far-side lobes of the beams (FSL). More on this below.

HFI processing

The inputs to the mapmaking are TOIs of signal that have been cleaned (as far as possible) of instrumental effects and calibrated in absorbed watts. While the processing involved is described in detail in the TOI processing section, we give a very brief summary here for convenience. That pipeline performs the following operations:

demodulation
this is performed around a variable level which is determined from the valid input data (a validity flag from a previous version of the processing is used for this purpose), and the data are converted to engineering units (V) using known conversion coefficients.
despiking
using the demodulated data converted to V (by the transfer function) the glitches are identified and fitted with templates. A glitch flag is produced that identifies the strongest part of the glitches, and a timeline of glitch tails is produced from the template fits, and subtracted from the demodulated timeline from step 1. Finally, the flagged ranges are replaced with data from an average over the pointing period (TBC)
dark template removal
the two dark bolometers are demodulated and despiked as above; the resulting timelines are then smoothed and used as an indicator of the overall temperature variations of the bolometer plate. Where the variations are consistent with each other, they are combined and removed from the bolometer signal timelines using appropriate coupling coefficients. The few percent of the data where they are not consistent are flagged on the timelines.
conversion to absorbed power
the timeline is converted to watts of absorbed power using the bolometer function. This includes a non-linearity correction; removal of the 4K cooler lines: the electromagnetic interference of the 4K cooler with the bolometer readout wires induces some sharp lines in the signal power spectra at frequencies of the 4K cooler's fundamental and its multiples, folded by the signal modulations. Fourier coefficients of the relevant lines are determined on a per-ring basis, and then removed from the data. The quality of the removal depends on the bolometer.
deconvolution by the time transfer function
this is done to correct for the non-instantaneous time response of the bolometers. The function itself is modeled using 4 parameters which are adjusted primarily on the planet data and also from comparisons of the northward and southward scans of the Galactic Plane. It is then removed using Fourier techniques, which has the side-effect of increasing the noise at high frequencies.
jump correction
removes some (relatively rare: 0.3 jumps per bolometer per pointing period, on average) jumps in the signal baseline. The jumps are detected characterized on smoothed TOIs, and corrected by adding a constant to part of the signal timeline. The origin of the jumps is not known.

The results of this processing are a timeline of signal (in absorbed watts) and a valid data flag timeline for each of the 50 valid bolometers processed; these timelines contain the full sky signal, i.e., including the solar and orbital dipoles, the Zodiacal light, and contributions from the Far-Side lobes. The dipoles are necessary for the flux calibration and are removed at the mapmaking stage. The remaining two bolometers (143-8 and 535-3) show semi-random jumps in the signal level, typically jumping over 2-5 different pseudo-baseline levels, a behavior known as Random Telegraphic Signal, so that these are commonly called the RTS bolometers. Finally, ring-level statistics of different types (mean, median, rms, kurtosis, etc.) are determined on a per-ring basis for all timelines, and a selection based on these statistics is used to discard anomalous rings, which are recorded in a ring-level flag for each valid bolometer timeline (see the Discarded rings section).

Throughout this processing, bright planets (Mars, Jupiter, Saturn, Uranus) and bright asteroids are masked in the timeline in order to avoid ringing effects in the processing. Since they move on the sky, the portion of the sky masked during one survey is observed during one, and no hole is left in the final map. In parallel, the planet data are processed in a similar way, but with different parameters for the despiking step, and without the final jump correction step. These results are processed separately to determine the beam shapes and the focal plane geometry.

The pointing is determined starting from the AHF produced by MOC, which gives the direction and orientation of the LOS of a fiducial position in the focal plane at frequencies of 8Hz during stable pointing and 4 Hz during maneuvers (TBC for details, reference). This is interpolated to the times of data observation (ref to method), corrected for the wobble and other time-dependent offsets determined from the observed positions of a large number of sources around the sky, and finally converted to the LOS of each detector using the quaternions in the IMO (which are determined from observations of bright planets - see the Detector_pointing section).

The mapmaking and calibration process is described in detail in the Map-making section, where detailed references are found. In brief it consists of:

binning the TOI data onto rings 
Healpix rings (HPRs) are used here, each ring containing the combined data of one pointing period.
flux calibration 
at 100-353 GHz, the flux calibration factors are determined for each pointing period (or ring) from the solar-motion dipole, using the WMAP dipole as the reference, and after removal of the dipole signal induced by the motion of the Planck satellite in the solar system. This gain by ring is smoothed with a window of width 50 rings, which reveals an apparent variation of ~1-2% on a scale of 100s to 1000s of rings for the 100-217 GHz channels, and is applied. At 353GHz, where the solar motion dipole is weaker compared to the signal, no gain variation is detected (within the uncertainties), and a single fixed gain is applied to all rings. At 545 and 857 GHz the gain is determined from the observation of Uranus and Neptune (but not Jupiter which is too bright) and comparison to recent models made explicitly for this mission. A single gain is applied to all rings at these frequencies.
destriping 
in order to remove low-frequency noise, an offset per ring is determined by minimizing the differences between HPRs at their crossings, and removed.
projection onto the map 
the offset-corrected and flux-calibrated HPRs are projected onto Healpix maps, with the data of each bolometer weighted by a factor of 1/NET of that bolometer, and accounting for the slight different band transmission profiles of the bolometers in each band.

These maps provide the main mission products. A second, reduced, set of maps, cleaned of the Zodiacal emission of the FSL leakage is also produced for the nominal mission and the two single surveys, but not for the half-rings (since the contribution would be the same for the two halves of each ring). For this purpose, the the Zodiacal emission and the FSL contamination, which are not fixed on the sky, are modeled separately at HPR-level, and subtracted from the signal HPR before projecting them onto the maps.

Together with signal maps, hit count and variance maps are also produced. The hit maps give the (integer) number of valid TOI-level samples that contribute to the signal of each pixel. All valid samples are counted in the same way, i.e., there is no weighting factor applied. The variance maps project the white noise estimate, provided by the NETs, in the sky domain.

LFI processing

LFI maps were constructed with the Madam map-making code, version 3.7.4. The code is based on generalized destriping technique, where the correlated noise component is modeled as a sequence of constant offset, called baselines. A noise filter was used to constrain the baseline solution allowing the use of 1 second baselines.

Radiometers were combined according to the horn-uniform weighting scheme to minimize systematics. The used weights are listed in Map-making. The flagged samples were excluded from the analysis by setting their weights to $C_{w}^{-1}$ = 0. The galaxy region was masked out in the destriping phase, to reduce error arising from strong signal gradients. The polarization component was included in the analysis, although only the temperature maps are released.

A detailed description of the map-making procedure is given in Planck-2013-II[3] and in section Map-making.

Inputs


HFI inputs

  • The cleaned TOIs of signal of each detector, together with their flags, produced by the TOI processing pipeline
  • The TOIs of pointing (quaternions), described in Detector_pointing
  • Bolometer-level characterization data, from the DPC's internal IMO (not distributed)
  • Planck orbit data used to compute and remove the earth dipole
  • WMAP solar dipole information used to calibrate the CMB channels
  • Planet models used to calibrate the Galactic channels.

LFI inputs

The Madam map-maker takes as an input:

  • The calibrated timelines (for details see TOI Processing)
  • The detector pointings (for details see Detector pointing)
  • The noise information in the form of three-parameter (white noise level ($\sigma$), slope, and knee frequency ($f_\mathrm{knee}$)) noise model (for details see RIMO)

Related products


Masks

Masks are provided of

the point sources
15 masks are provided, three for the LFI (one mask for each frequency masking at the 4[math]\sigma[/math] level) and 12 for the HFI (two masks for each frequency at the 5 and 10[math]\sigma[/math] levels. For the HFI the masks can be used as they are, for the LFI they need to be downgraded to Nside=1024 except for the 70 GHz channel at Nside=2048 which does not need to be downgraded.
the Galactic Plane
8 masks are provided giving 20, 40, 60, 70, 80, 90, 97, and 99% sky coverage in two different files, at Nside=2048. For the HFI they can be used as they are, for the LFI they need to be downgraded at Nside=1024 (note that if using the 70 GHZ at Nside=2048 no downgraded is needed)


The masks are binary, in GALACTIC coordinates, and NESTED ordering. The table below give the filenames.


FITS filenames for masks
Frequency LFI Point Source masks
30GHz LFI_MASK_030-ps_2048_R1.00.fits
44GHz LFI_MASK_044-ps_2048_R1.00.fits
70GHz LFI_MASK_070-ps_2048_R1.00.fits
HFI Point Source masks
HFI_Mask_PointSrc_2048_R1.10.fits
Galactic Plane masks
HFI_Mask_GalPlane_2048_R1.10.fits


The masks are shows below in a single figure. While this is quite clear for the Galactic Plane masks, it is less so for the point source masks, but it does give a clear perspective on how the latter are distributed over the sky.

File names


The FITS filenames are of the form {H|L}FI_SkyMap_fff_nnnn_R1.nn_{coverage}_{type}.fits, where fff are three digits to indicate the Planck frequency band, and nnnn is the Healpix Nside of the map, coverage indicates which part of the mission is covered, and the optional type indicates the subset of input data used. A full list of products, with links to them in the Archive, is given in the tables below.

For the benefit of users who are only looking for the frequency maps with no additional information, we also provide a file combining the 9 frequency maps as separate columns in a single extension. The 9 columns in this file contain the intensity maps ONLY and no other information (hit maps and variance maps) is provided.

FITS filenames
Frequency Full channel maps
30GHz LFI_SkyMap_030_1024_R1.10_nominal.fits
44GHz LFI_SkyMap_044_1024_R1.10_nominal.fits
70GHz LFI_SkyMap_070_1024_R1.10_nominal.fits
70GHz LFI_SkyMap_070_2048_R1.10_nominal.fits
100GHz HFI_SkyMap_100_2048_R1.10_nominal.fits
143GHz HFI_SkyMap_143_2048_R1.10_nominal.fits
217GHz HFI_SkyMap_217_2048_R1.10_nominal.fits
353GHz HFI_SkyMap_353_2048_R1.10_nominal.fits
545GHz HFI_SkyMap_545_2048_R1.10_nominal.fits
857GHz HFI_SkyMap_857_2048_R1.10_nominal.fits
Frequency Full channel, Zodi-corrected maps
100GHz HFI_SkyMap_100_2048_R1.10_nominal_ZodiCorrected.fits
143GHz HFI_SkyMap_143_2048_R1.10_nominal_ZodiCorrected.fits
217GHz HFI_SkyMap_217_2048_R1.10_nominal_ZodiCorrected.fits
353GHz HFI_SkyMap_353_2048_R1.10_nominal_ZodiCorrected.fits
545GHz HFI_SkyMap_545_2048_R1.10_nominal_ZodiCorrected.fits
857GHz HFI_SkyMap_857_2048_R1.10_nominal_ZodiCorrected.fits
Frequency Combined frequency maps
All COM_MapSet_I-allFreqs_R1.10_nominal.fits


FITS filenames
Frequency Survey 1 maps Survey 2 maps
30GHz LFI_SkyMap_030_1024_R1.10_survey_1.fits

LFI_SkyMap_030_1024_R1.10_survey_2.fits

44GHz LFI_SkyMap_044_1024_R1.10_survey_1.fits

LFI_SkyMap_044_1024_R1.10_survey_2.fits

70GHz LFI_SkyMap_070_1024_R1.10_survey_1.fits

LFI_SkyMap_070_1024_R1.10_survey_2.fits

70GHz LFI_SkyMap_070_2048_R1.10_survey_1.fits

LFI_SkyMap_070_2048_R1.10_survey_2.fits

100GHz HFI_SkyMap_100_2048_R1.10_survey_1.fits

HFI_SkyMap_100_2048_R1.10_survey_2.fits

143GHz HFI_SkyMap_143_2048_R1.10_survey_1.fits

HFI_SkyMap_143_2048_R1.10_survey_2.fits

217GHz HFI_SkyMap_217_2048_R1.10_survey_1.fits

HFI_SkyMap_217_2048_R1.10_survey_2.fits

353GHz HFI_SkyMap_353_2048_R1.10_survey_1.fits

HFI_SkyMap_353_2048_R1.10_survey_2.fits

545GHz HFI_SkyMap_545_2048_R1.10_survey_1.fits

HFI_SkyMap_545_2048_R1.10_survey_2.fits

857GHz HFI_SkyMap_857_2048_R1.10_survey_1.fits

HFI_SkyMap_857_2048_R1.10_survey_2.fits

Frequency Survey 1 Zodi-corrected maps Survey 2 Zodi-corrected maps
100GHz HFI_SkyMap_100_2048_R1.10_survey_1_ZodiCorrected.fits

HFI_SkyMap_100_2048_R1.10_survey_2_ZodiCorrected.fits

143GHz HFI_SkyMap_143_2048_R1.10_survey_1_ZodiCorrected.fits

HFI_SkyMap_143_2048_R1.10_survey_2_ZodiCorrected.fits

217GHz HFI_SkyMap_217_2048_R1.10_survey_1_ZodiCorrected.fits

HFI_SkyMap_217_2048_R1.10_survey_2_ZodiCorrected.fits

353GHz HFI_SkyMap_353_2048_R1.10_survey_1_ZodiCorrected.fits

HFI_SkyMap_353_2048_R1.10_survey_2_ZodiCorrected.fits

545GHz HFI_SkyMap_545_2048_R1.10_survey_1_ZodiCorrected.fits

HFI_SkyMap_545_2048_R1.10_survey_2_ZodiCorrected.fits

857GHz HFI_SkyMap_857_2048_R1.10_survey_1_ZodiCorrected.fits

HFI_SkyMap_857_2048_R1.10_survey_2_ZodiCorrected.fits

Frequency Half-ring 1 maps Half-ring 2 maps
30GHz LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_1.fits

LFI_SkyMap_030_1024_R1.10_nominal_ringhalf_2.fits

44GHz LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_1.fits

LFI_SkyMap_044_1024_R1.10_nominal_ringhalf_2.fits

70GHz LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_1.fits

LFI_SkyMap_070_1024_R1.10_nominal_ringhalf_2.fits

70GHz LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_1.fits

LFI_SkyMap_070_2048_R1.10_nominal_ringhalf_2.fits

100GHz HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_1.fits

HFI_SkyMap_100_2048_R1.10_nominal_ringhalf_2.fits

143GHz HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_1.fits

HFI_SkyMap_143_2048_R1.10_nominal_ringhalf_2.fits

217GHz HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_1.fits

HFI_SkyMap_217_2048_R1.10_nominal_ringhalf_2.fits

353GHz HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_1.fits

HFI_SkyMap_353_2048_R1.10_nominal_ringhalf_2.fits

545GHz HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_1.fits

HFI_SkyMap_545_2048_R1.10_nominal_ringhalf_2.fits

857GHz HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_1.fits

HFI_SkyMap_857_2048_R1.10_nominal_ringhalf_2.fits

FITS file structure


FITS file structure

The FITS files for the sky maps contain a minimal primary header with no data, and a BINTABLE extension (EXTENSION 1, EXTNAME = FREQ-MAP) containing the data. The structure is shows schematically in the figure at right.

The FREQ-MAP extension contains is a 3-column table that contain the signal, hit-count and variance maps, all in Healpix format, in columns 1, 2, and 3, respectively. The number of rows is 50331648 for HFI and LFI 70 GHz at Nside=2048 and 12582912 for LFI maps at Nside=1024 (N.B: Npix = 12 Nside^2). The three columns are I_STOKES for the intensity (or temperature) signal, HIT for the hit-count and II_COV for the variance. The exact order of the columns in the figure is indicative only, and the details can be found in the keywords.

Keywords indicate the coordinate system (GALACTIC), the Healpix ordering scheme (NESTED), the units (K_cmb or MJy/sr) of each column, and of course the frequency channel (FREQ). The COMMENT fields give a one-line summary of the product, and some other information useful for traceability within the DPCs. The original filename is also given in the FILENAME keyword as are the datasum and the md5 checksum for the extension. The BAD_DATA keyword gives the value used by Healpix to indicate pixels for which no signal is present (these will also have a hit-count value of 0). The COMMENT fields give further information including some traceability data for the DPC's. The main parameters are summarised below:


Sky map file data structure
1. EXTNAME = 'FREQ-MAP' : Data columns
Column Name Data Type Units Description
I_STOKES Real*4 K_cmb or MJy/sr The signal map
HITS Int*4 none The hit-count map
II_COV Real*4 K_cmb2 or (MJy/sr)2 The variance map
Keyword Data Type Value Description
PIXTYPE string HEALPIX
COORDSYS string GALACTIC Coordinate system
ORDERING string NESTED Healpix ordering
NSIDE Int 1024 or 2048 Healpix Nside
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 12582911 or 50331647 Last pixel number
FREQ string nnn The frequency channel


The same structure applies to all SkyMap products, independent of whether they are full channel, survey of half-ring. The distinction between the types of maps is present in the FITS filename (and in the traceability comment fields).

References

  1. Planck 2013 results. VIII. HFI photometric calibration and Map-making, Planck Collaboration, 2014, A&A, 571, A8.
  2. Planck 2013 results. V. LFI Calibration, Planck Collaboration, 2014, A&A, 571, A5.
  3. Planck 2013 results. II. Low Frequency Instrument data processing, Planck Collaboration, 2014, A&A, 571, A2.


(Planck) High Frequency Instrument

(Planck) Low Frequency Instrument

(Hierarchical Equal Area isoLatitude Pixelation of a sphere, <ref name="Template:Gorski2005">HEALPix: A Framework for High-Resolution Discretization and Fast Analysis of Data Distributed on the Sphere, K. M. Górski, E. Hivon, A. J. Banday, B. D. Wandelt, F. K. Hansen, M. Reinecke, M. Bartelmann, ApJ, 622, 759-771, (2005).

Cosmic Microwave background

Flexible Image Transfer Specification

random telegraphic signal

Planck Legacy Archive

reduced IMO

To be defined / determined

Data Processing Center

Full-Width-at-Half-Maximum

Noise Equivalent Temperature

analog to digital converter

To be confirmed

sudden change of the baseline level inside a ring

Attitude History File

[ESA's] Mission Operation Center [Darmstadt, Germany]

Line Of Sight