Difference between revisions of "Component maps test"

From Planck Legacy Archive Wiki
Jump to: navigation, search
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
---------
 
<br>
 
 
<span style="font-size:150%">'''Contents of this chapter'''</span>
 
<span style="font-size:150%">'''Contents of this chapter'''</span>
  
<br>
+
; [[Component maps test#overview | Overview]]
 +
; [[CMB Maps test#toc | CMB maps]]
 +
; [[Astrophysical component maps test#toc | Astrophysical component maps]]
  
; [[HFI_design,_qualification,_and_performance#overview | Overview]]
+
==<span id="overview" >'''Overview'''</span>==
 
 
; [[HFI_cryogenics | Cryogenics]]: ''[[HFI_cryogenics#Dilution|Dilution cooler]] • [[HFI_cryogenics#4K_J-T_cooler|4K J-T cooler]]
 
; [[HFI_cold_optics | Cold optics]]: ''[[HFI_cold_optics #Horns,lenses|Horns,lenses]] • [[HFI_cold_optics #Spectral_Response|Spectral response]]
 
; [[HFI_detection_chain | Detection chain]]: ''[[HFI_detection_chain#Bolometers|Bolometers]] • [[HFI_detection_chain#Focal_plane_layout|Focal plane layout]] • [[HFI_detection_chain#Readout|Readout]] • [[HFI_detection_chain#Principles_of_the_readout_electronics|Principles of the readout electronics]] • [[HFI_detection_chain#JFETs|JFETs]] • [[HFI_detection_chain#Time_response|Time response]] • [[HFI_detection_chain#Data_compression|Data compression]]''
 
; [[HFI_operations | Operations]]:''• ''
 
; [[HFI_perfsummary | Performance summary]]: here remind worse sytematics and point to DPC. Summary of sucess and limitations. JML. Link to early HFI in flight perf.<span style="color:red">(Lamarre)</span>
 
; [[HFI_inst_annexes | Annexes]]
 
 
 
<br>
 
---------
 
 
 
==<span id="overview" style="font-size:200%">'''Overview'''</span>
 
  
 
<span style="color:red"> This section is very preliminary. Its purpose is to give examples of what these products could look like.
 
<span style="color:red"> This section is very preliminary. Its purpose is to give examples of what these products could look like.
Line 29: Line 17:
 
; variable with frequency : in this case the file will contain up to 10 signal maps, for the 10 Planck frequencies, accompanied (optionally) by uncertainties a mask.
 
; variable with frequency : in this case the file will contain up to 10 signal maps, for the 10 Planck frequencies, accompanied (optionally) by uncertainties a mask.
  
== CMB maps ==
 
 
<span style="color:Red">NOTE: Text in red to be removed when filling the contents</span>
 
 
===Product description===
 
<span style="color:Red">A general description of the product, including e.g. figures related to the contents (e.g. maps, tables), and some explanation of its scientific meaning. If there are scientific warnings about the use of the product (User’s caveats), they should also be given here, or at least references to other explanatory documents (papers etc).</span>
 
 
Three different estimates of the CMB are produced. The subsections below give a brief description of each method, and what are its advantages. Details of the motivations can be found in the corresponding paper <cite>#planck2013-06</cite>[06].
 
 
The CMB data are in thermodynamic temperature units (uK_cmb), and the residuals are in the units of the original sky map (K_cmb for the CMB channels, and MJy/sr for the Galactic channels). As usual, all maps are in Galactic coordinate and use Nested ordering scheme.
 
 
 
 
==== SMICA ====
 
 
<span style="color:red"> Cardoso to write brief intro with purpose, production method, inputs used, constraints
 
</span>
 
 
==== Sevem ====
 
 
The aim of Sevem is to produce clean CMB maps at one or several frequencies by using a procedure based on template fitting. The templates are internal, i.e., they are constructed from Planck data, avoiding the need for external data sets, which usually complicates the analyses and may introduce inconsistencies. The method has been successfully applied to Planck simulations Leach et al., 2008 and to WMAP polarisation data Fernandez-cobos et al., 2012. In the cleaning process, no assumptions about the foregrounds or noise levels are needed, rendering the technique very robust.
 
 
 
==== NILC ====
 
 
<span style="color:red"> Cardoso to write brief intro with purpose, production method, inputs used, constraints
 
</span>
 
 
===Production process===
 
<span style="color:Red">Description of the Pipeline used to generate the product. In particular any limitations and approximations used in the data processing should be listed. Avoiding detailed descriptions of methods and referring to other parts of the ES and/or the relevant Planck papers for the details. References however should be quite detailed (i.e. it is not enough to direct the user to a paper, but the relevant section in the paper should be provided).</span>
 
 
 
==== SMICA ====
 
 
<span style="color:red"> Cardoso to write brief intro with purpose, production method, inputs used, constraints
 
</span>
 
 
==== Sevem ====
 
 
The templates are constructed by subtracting two neighbouring Planck frequency channel maps, after first smoothing them to a common resolution to ensure that the CMB signal is properly removed. A linear combination of the templates is then subtracted from the Planck sky map at the frequency to be cleaned, in order to produce the clean CMB. The coefficients of the linear combination are obtained by minimising the variance of the clean map outside a given mask. Although we exclude very contaminated regions during the minimization, the subtraction is performed for all pixels and, therefore, the cleaned maps cover the full-sky (although we expect that foreground residuals are present in the excluded areas).
 
 
An additional level of flexibility can also be considered: the linear coefficients can be the same for all the sky, or several regions with different sets of coefficients can be considered. The regions are then combined in a smooth way, by weighting the pixels at the boundaries, to avoid discontinuities in the clean maps. In order to take into account the different spectral behaviour of the foregrounds at low and high galactic latitudes, we have chosen to use two regions: the region with the 3 per cent brightest Galactic emission, and the region with the remaining 97 per cent of the sky.
 
 
Our final CMB map has then been constructed by combining the 143 and 217 GHz cleaned maps by weighting the maps in harmonic space taking into account the noise level, the resolution and a rough estimation of the foreground residuals of each map (obtained from realistic simulations). This final map has a resolution corresponding to a Gaussian beam of fwhm=5 arcminutes.
 
 
==== NILC ====
 
 
===Inputs===
 
<span style="color:Red">A list (and brief description to the extent possible) of the input data used to generate this product (down to file names), as well as any external ancillary data sets which were used.</span>
 
 
 
==== SMICA ====
 
 
<span style="color:red"> Cardoso to write brief intro with purpose, production method, inputs used, constraints
 
</span>
 
 
==== Sevem ====
 
 
The inputs maps used are all the Planck frequency channels. In particular, we have cleaned the 100, 143 GHz and 217 GHz maps using four templates constructed as the difference of the following Planck channels (smoothed to a common resolution): (30-44)GHz, (44-70)GHz, (545-353)GHz and (857-545)GHz. [from Laura Bonavera & Belen Barreiro, 18.feb.2013]
 
 
==== NILC ====
 
 
 
===Related products===
 
<span style="color:Red">A description of other products that are related and share some commonalities with the product being described here. E.g. if the description is of a generic product (e.g. frequency maps), all the products falling into that type should be listed and referenced.</span>
 
 
===File names===
 
The FITS files corresponding to the three CMB products are the following:
 
 
* COM_CompMap_CMB-nilc_2048_R1.10.fits
 
* COM_CompMap_CMB-sevem_2048_R1.10.fits
 
* COM_CompMap_CMB-smica_2048_R1.10.fits
 
 
===Meta Data===
 
<span style="color:Red">A detailed description of the data format of each file, including header keywords for fits files, extension names, column names, formats….</span>
 
 
Each CMB products is delivered as a FITS file that contains four data extensions (nos. 1-4) in addition to a primary extension (no. 0) with no data. They contain:
 
 
:    Ext 1, 'COMP-MAP' : a CMB signal map accompanied by an uncertainty map, and two mask, all at Nside 2048. The CMB has been inpainted with likely values in regions where it could not be determined (namely over the Galactic Plane and some bright sources); the inpainted area covers ~3% of the sky. The uncertainty map is derived from the half-ring maps, which thus misses the low frequency components of the noise, but provides a reasonable estimate of the uncertainties at hi l, but not at low l, where residuals from the foregrounds become important. The masks are a validity mask to indicate where the resulting CMB is considered valid, and an inpainting mask to indicate where the CMB was inpainted.
 
:    Ext 2, 'FGDS-LFI' : foregrounds at the three LFI frequencies, at Nside 1024, built by smoothing the CMB map to the resolution of the given frequency
 
:    Ext 3, 'FGDS-HFI' : foregrounds at the six HFI frequencies, at Nside 2048, built by smoothing the CMB map to the resolution of the given frequency
 
:    Ext 4, 'BEAM-WF' : the beam transfer function, out to a value of ell that depends on the method and that is given in the header
 
 
== Maps of astrophysical foregrounds ==
 
 
We describe diffuse foreground products for the Planck 2013 release. See Planck paper P06-Component Separation <cite>#planck2013-p06</cite> for a detailed description and astrophysical discussion of those.
 
 
===Product description===
 
 
====Low frequency foreground component====
 
 
The products below contain the result of the fitting for one foreground component at low frequencies in Planck bands,
 
along with its spectral behavior parametrized by a power law spectral index. Amplitude and spectral indeces are
 
evaluated at Nside 256 (see below in the production process), along with standard deviation from sampling and
 
instrumental noise on both. An amplitude solution at Nside=2048 is also given, along with standard deviation from
 
sampling and instrumental noise as well as solutions on halfrings. The beam profile associated to this component is
 
also provided as a secondary Extension in the Nside 2048 product.
 
 
====Thermal dust====
 
 
The products below contain the result of the fitting for one foreground component at high frequencies in Planck bands,
 
along with its spectral behavior parametrized by temperature and emissivity. Amplitude, temperature and emissivity are
 
evaluated at Nside 256 (see below in the production process), along with standard deviation from sampling and
 
instrumental noise on all of them. An amplitude solution at Nside=2048 is also given, along with standard deviation from
 
sampling and instrumental noise as well as solutions on halfrings. The beam profile associated to this component is provided.
 
 
====Sky mask====
 
 
The delivered mask is defined as the sky region where the fitting procedure was conducted and the solutions presented here were obtained. It is made by masking a region where the Galactic emission is too intense to perform the fitting, plus the masking of brightest point sources.
 
 
===Production process===
 
 
CODE: COMMANDER-RULER. The code exploits a parametrization of CMB and main diffuse foreground observables. The naive resolution of input
 
frequency channels is reduced to Nside=256 first. Parameters related to the foreground scaling with frequency are estimated at that resolution
 
by using Markov Chain Monte Carlo analysis using Gibbs sampling. The foreground parameters make the foreground mixing matrix which is
 
applied to the data at full resolution in order to obtain the provided products at Nside=2048. In the Planck paper P06-Component Separation <cite>#planck2013-p06</cite> additional material is discussed, specifically concerning the sky region where the solutions are reliable, in terms of chi2 maps.
 
 
===Inputs===
 
 
Nominal frequency maps at 30, 44, 70, 100, 143, 217, 353 GHz ({{PLAMaps|inst=LFI|freq=30|link=LFI 30 GHz frequency maps}}, {{PLAMaps|inst=LFI|freq=44|link=LFI 44 GHz frequency maps}} and {{PLAMaps|inst=LFI|freq=70|link=LFI 70 GHz frequency maps}}, {{PLAMaps|inst=HFI|freq=100|link=HFI 100 GHz frequency maps}}, {{PLAMaps|inst=HFI|freq=143|link=HFI 143 GHz frequency maps}},{{PLAMaps|inst=HFI|freq=217|link=HFI 217 GHz frequency maps}} and {{PLAMaps|inst=HFI|freq=353|link=HFI 353 GHz frequency maps}}) and their II column corresponding to the noise covariance matrix.
 
Halfrings at the same frequencies. Beam window functions as reported in the [[The RIMO#Beam Window Functions|LFI and HFI RIMO]].
 
 
===Related products===
 
 
None.
 
 
===File names===
 
 
Low frequency component at Nside 256: COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits
 
 
Low frequency component at Nside 2048: COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits
 
 
Thermal dust at Nside 256: COM_CompMap_dust-commrul_0256_R1.00.fits
 
 
Thermal dust at Nside 2048: COM_CompMap_dust-commrul_2048_R1.00.fits
 
 
Mask: COM_CompMap_Mask-rulerminimal_2048.fits
 
 
===Meta Data===
 
 
====Low frequency foreground component====
 
 
=====Low frequency component at Nside 256=====
 
 
File name: COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits
 
 
Name HDU -- COMP-MAP
 
 
Column 1: I -- uK_CMB
 
 
Column 2: I_stdev -- uK_CMB
 
 
Column 3: Beta -- No Unit
 
 
Column 4: B_stdev -- No Unit
 
 
Comment: The Intensity is normalized at 30 GHz
 
 
Comment: The intensity was estimated during mixing matrix estimation
 
 
=====Low frequency component at Nside 2048=====
 
 
File name: COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits
 
 
Name HDU -- COMP-MAP
 
 
Column 1: I -- uK_CMB
 
 
Column 2: I_stdev -- uK_CMB
 
 
Column 3: I_hr1 -- uK_CMB
 
 
Column 4: I_hr2 -- uK_CMB
 
 
Comment: The intensity was computed after mixing matrix application
 
 
Nome HDU -- BeamWF
 
 
Column 1: Temperature (meaning the beam profile) -- None
 
 
Comment: Beam window function used in the Component separation process
 
 
====Thermal dust====
 
 
=====Thermal dust component at Nside=256=====
 
 
File name: COM_CompMap_dust-commrul_0256_R1.00.fits
 
 
Name HDU -- COMP-MAP
 
 
Column 1: I -- MJy/sr
 
 
Column 2: I_stdev -- MJy/sr
 
 
Column 3: Em -- none
 
 
Column 4: Em_stdev -- none
 
 
Column 5: T -- uK_CMB
 
 
Column 6: T_stdev -- uK_CMB
 
 
COMMENT: The intensity is normalized at 353 GHz
 
 
=====Thermal dust component at Nside=2048=====
 
 
File name: COM_CompMap_dust-commrul_2048_R1.00.fits
 
 
Name HDU -- COMP-MAP
 
 
Column 1: I -- MJy/sr
 
 
Column 2: I_stdev -- MJy/sr
 
 
Column 2: I_hr1 -- MJy/sr
 
 
Column 3: I_hr2 -- MJy/sr
 
 
Name HDU -- BeamWF
 
 
Column 1: Temperature (meaning the beam profile) -- None
 
 
Comment: Beam window function used in the Component separation process
 
 
====Sky mask====
 
 
File name: COM_CompMap_Mask-rulerminimal_2048.fits
 
 
Nome HDU -- COMP-MASK
 
 
Column 1: Mask
 
 
=== Dust optical depth map and model ===
 
 
Thermal emission from interstellar dust is captured by Planck-HFI over the whole sky, at all frequencies from 100 to 857 GHz. This emission is well modelled by a modified black body in the far-infrared to millimeter range. It is produced by the biggest interstellar dust grain that are in thermal equilibrium with the radiation field from stars. The grains emission properties in the sub-millimeter are therefore directly linked to their absorption properties in the UV-visible range. By modelling the thermal dust emission in the sub-millimeter, a map of dust reddening in the visible can then be constructed.
 
 
'''Model of thermal dust emission'''<br>
 
The model of the thermal dust emission is based on a modify black body fit to the data I_nu: <br>
 
I_nu = A B_nu(T) nu^beta.<br>
 
where B_nu(T) is the Planck function for dust equilibirum temperature T, A is the amplitude of the MBB and beta the dust spectral index. The dust optical depth at frequency nu is :<br>
 
Tau_nu = I_nu / B_nu(T) = A nu^beta
 
 
The dust parameters provided are T, beta and Tau_353. They were obtained by fitting the Planck data at 353, 545 and 857 GHz together with the IRAS (IRIS) 100 micron data. All maps (in Healpix nside=2048) were smoothed to a common resolution of 5 arcmin. The CMB anisotropies, clearly visible at 353 GHz, were removed from all the HFI maps using the SMICA map.
 
An offset was removed from each map to obtained a meaningful Galactic zero level, using a correlation with the LAB 21 cm data in diffuse areas of the sky (N_HI < 2x10^20 cm^-2). Because the dust emission is so well correlated between frequencies in the Rayleigh-Jeans part of the dust spectrum, the zero level of the 545 and 353 GHz were improved by correlating with the 857 GHz over a larger mask (N_HI < 3x10^20 cm^-2). Faint residual dipole structures, identified in the 353 and 545 GHz maps, were removed prior to the fit.
 
 
The MBB fit was performed using a chi-square minimization, assuming errors for each data point that include instrumental noise, calibration uncertainties (on both the dust emission and the CMB anisotropies) and uncertainties on the zero level. Because of the known degeneracy between T and Beta in the presence of noise, we produced a model of dust emission using data smoothed to 35 arcmin; at such resolution no systematic bias of the parameters is observed. The map of the spectral index Beta at 35 arcmin was than used to fit the data for T and Tau_353 at 5 arcmin.
 
 
'''E(B-V) map :'''<br>
 
For the production of the E(B-V) map, we used Planck and IRAS data from which point sources in diffuse areas were removed to avoid contamination by galaxies.
 
In the hypothesis of constant dust emission cross-section, the optical depth map Tau_353 is proportional to dust column density. It can then be used to estimate E(B-V), also proportional to dust column density in the hypothesis of a constant differential absorption cross-section between the B and V bands. Given those assumptions : <br>
 
E(B-V) = q Tau_353.<br>
 
To estimate the calibration factor q, we followed a method similar to Mortsell (2013) based on SDSS reddening measurements (E(g-r) which corresponds closely to E(B-V)) of 77 429 Quasars (Schneider et al. 2007). The interstellar HI column densities covered on the lines of sight of this sample ranges from 0.5 to 10x10^20 cm^-2. Therefore this sample allows to estimate q in the diffuse ISM where dust properties are expected to vary less than in denser clouds where coagulation and grain growth might modify dust emission and absorption cross sections.
 
 
'''Dust optical depth products'''<br>
 
The characteristics of the dust model maps are the following.
 
* Dust temperature : nside 2048, fwhm=5 arcmin, units=Kelvin
 
* Dust spectral index : nside=2048, fwhm=35 arcmin, no units
 
* Dust optical depth at 353 GHz : nside=2048, fwhm=5 arcmin, no units
 
* Dust reddening E(B-V) : nside=2048, fwhm=5 arcmin, units=magnitude, obtained with data from which point sources were removed.
 
These maps and their associated uncertainty maps are written into a single extension whose structure is shows below.
 
 
;-----------------------------------------------------------------------------
 
; EXTENSION 1: COMP-MAP
 
; - Header
 
;-----------------------------------------------------------------------------
 
MRDFITS: Binary table.  8 columns by  1 rows.
 
XTENSION= 'BINTABLE'          /Written by IDL:  Mon Feb  4 11:33:34 2013     
 
BITPIX  =                    8 /                                               
 
NAXIS  =                    2 /Binary table                                   
 
NAXIS1  =          1610612736 /Number of bytes per row                       
 
NAXIS2  =                    1 /Number of rows                                 
 
PCOUNT  =                    0 /Random parameter count                         
 
GCOUNT  =                    1 /Group count                                   
 
TFIELDS =                    8 /Number of columns                             
 
COMMENT                                                                       
 
COMMENT  *** End of mandatory fields ***                                       
 
COMMENT                                                                       
 
EXTVER  =                    1 /Extension version                             
 
DATE    = '2013-02-04'        /Creation date                                 
 
COMMENT                                                                       
 
COMMENT  *** Column names ***                                                 
 
COMMENT                                                                       
 
TTYPE1  = 'TAU353  '          / opacity 353GHz                               
 
TTYPE2  = 'TAU353ERR'          / opacity 353GHz                               
 
TTYPE3  = 'A_V    '          / Extinction                                   
 
TTYPE4  = 'A_V_ERR '          / Error on A_V                                 
 
TTYPE5  = 'T_HF    '          / T for hi freq correction                     
 
TTYPE6  = 'T_HF_ERR'          / T for hi freq correction                     
 
TTYPE7  = 'BETAHF  '          / Beta for hi freq correction                   
 
TTYPE8  = 'BETAHFERR'          / Mask                                         
 
COMMENT                                                                       
 
COMMENT  *** Column formats ***                                               
 
COMMENT                                                                       
 
TFORM1  = '50331648E'          /                                               
 
TFORM2  = '50331648E'          /                                               
 
TFORM3  = '50331648E'          /                                               
 
TFORM4  = '50331648E'          /                                               
 
TFORM5  = '50331648E'          /                                               
 
TFORM6  = '50331648E'          /                                               
 
TFORM7  = '50331648E'          /                                               
 
TFORM8  = '50331648E'          /                                               
 
COMMENT                                                                       
 
COMMENT  *** Column units ***                                                 
 
COMMENT                                                                       
 
TUNIT1  = 'none    '          /                                               
 
TUNIT2  = 'none    '          /                                               
 
TUNIT3  = 'mag    '          /                                               
 
TUNIT4  = 'mag    '          /                                               
 
TUNIT5  = 'K      '          /                                               
 
TUNIT6  = 'K      '          /                                               
 
TUNIT7  = 'none    '          /                                               
 
TUNIT8  = 'none    '          /                                               
 
COMMENT                                                                       
 
COMMENT  *** Planck params ***                                                 
 
COMMENT                                                                       
 
EXTNAME = 'COMP-MAP'          / Extension name                               
 
AST-COMP= 'DUST_OPA'          / Component                                     
 
COORSYS = 'GALACTIC'          / Coordinate system                             
 
ORDERING= 'NESTED  '          / Healpix ordering                             
 
NSIDE  =                2048 / Healpix Nside                                 
 
FIRSTPIX=                    0 /                                               
 
LASTPIX =            50331647 /                                               
 
BAD_DATA=        -1.63750E+30 / bad pixel value                               
 
FILENAME= 'HFI_CompMap_DustOpacity_2048_R1.00.fits' / FITS filename           
 
CHECKSUM= '7DPW8CMU7CMU7CMU'  / HDU checksum created 2013-02-04T10:33:35     
 
PROCVER = 'DX9    '          / Product version                               
 
COMMENT                                                                       
 
COMMENT  see Planck Eplanatory Supplement Ch. 999 for                         
 
COMMENT  for description of the model and how to use it.                       
 
COMMENT                                                                       
 
END
 
 
=== CO emission maps ===
 
 
CO rotational transition line emission is present in all HFI bands but for the 143 GHz channel. It is especially significant in the 100, 217 and 353 GHz channels (due to the 115 (1-0), 230 (2-1) and 345 GHz (3-2) CO transitions). This emission comes essentially from the Galactic interstellar medium and is mainly located at low and intermediate Galactic latitudes. Three approaches (summarised below) have been used to extract CO velocity-integrated emission maps from HFI maps and to make three types of CO products. An introduction is given in [[Science#CO_maps|Section]] and a full description of these products is given in <cite>#planck2013-p03a</cite>.
 
* Type 1 product: it is based on a single channel approach using the fact that each CO line has a slightly different transmission in each bolometer at a given frequency channel. These transmissions can be evaluated from bandpass measurements that were performed on the ground or empirically determined from the sky using existing ground-based CO surveys. From these, the J=1-0, J=2-1 and J=3-2 CO lines can be extracted independently. As this approach is based on individual bolometer maps of a single channel, the resulting Signal-to-Noise ratio (SNR) is relatively low. The benefit, however, is that these maps do not suffer from contamination from other HFI channels (as is the case for the other approaches) and are more reliable, especially in the Galactic Plane.
 
 
* Type 2 product: this product is obtained using a multi frequency approach. Three frequency channel maps are combined to extract the J=1-0 (using the 100, 143 and 353 GHz channels) and J=2-1 (using the 143, 217 and 353 GHz channels) CO maps. Because frequency channels are combined, the spectral behaviour of other foregrounds influences the result. The two type 2 CO maps produced in this way have a higher SNR than the type 1 maps at the cost of a larger possible residual contamination from other diffuse foregrounds.
 
 
* Type 3 product: using prior information on CO line ratios and a multi-frequency component separation method, we construct a combined CO emission map with the largest possible SNR. This type 3 product can be used as a sensitive finder chart for low-intensity diffuse CO emission over the whole sky.
 
 
The released Type 1 CO maps have been produced using the MILCA-b algorithm, Type 2 maps using a specific implementation of the Commander algorithm, and the Type 3 map using the full Commander-Ruler component separation pipeline (see [[Astrophysical_component_maps#Maps_of_astrophysical_foregrounds|above]]).
 
 
Characteristics of the released maps are the following. We provide Healpix maps with Nside=2048. For one transition, the CO velocity-integrated line signal map is given in K_RJ.km/s units. A conversion factor from this unit to the native unit of HFI maps (K_CMB) is provided in the header of the data files and in the RIMO. Four maps are given per transition and per type:
 
* The signal map
 
* The standard deviation map (same unit as the signal),
 
* A null test noise map (same unit as the signal) with similar statistical properties. It is made out of half the difference of half-ring maps.
 
* A mask map (0B or 1B) giving the regions (1B) where the CO measurement is not reliable because of some severe identified foreground contamination.
 
 
All products of a given type belong to a single file.
 
Type 1 products have the native HFI resolution i.e. approximately 10, 5 and 5 arcminutes for the CO 1-0, 2-1, 3-2 transitions respectively.
 
Type 2 products have a 15 arcminute resolution
 
The Type 3 product has a 5.5 arcminute resolution.
 
 
 
A typical header for these data is given below. It contains a keyword giving the conversion between the CO velocity-integrated units (K.km/s) and the HFI map native units (K_CMB). However, users are to use CO subtraction with care, as it will necessarily add noise to the result.
 
 
XTENSION= 'BINTABLE'          /Written by IDL:  Fri Dec 14 14:29:27 2012
 
BITPIX  =                    8 /
 
NAXIS  =                    2 /Binary table
 
NAXIS1  =          1308622848 /Number of bytes per row
 
NAXIS2  =                    1 /Number of rows
 
PCOUNT  =                    0 /Random parameter count
 
GCOUNT  =                    1 /Group count
 
TFIELDS =                    8 /Number of columns
 
COMMENT
 
COMMENT  *** End of mandatory fields ***
 
COMMENT
 
EXTVER  =                    1 /Extension version
 
DATE    = '2012-12-14'        /Creation date
 
COMMENT
 
COMMENT  *** Column names ***
 
COMMENT
 
TTYPE1  = 'I10    '          / Intensity
 
TTYPE2  = 'E10    '          / Error
 
TTYPE3  = 'N10    '          / Nulltest
 
TTYPE4  = 'M10    '          / Mask
 
TTYPE5  = 'I21    '          / Intensity
 
TTYPE6  = 'E21    '          / Error
 
TTYPE7  = 'N21    '          / Nulltest
 
TTYPE8  = 'M21    '          / Mask
 
COMMENT
 
COMMENT  *** Column formats ***
 
COMMENT
 
TFORM1  = '50331648E'          /
 
TFORM2  = '50331648E'          /
 
TFORM3  = '50331648E'          /
 
TFORM4  = '50331648B'          /
 
TFORM5  = '50331648E'          /
 
TFORM6  = '50331648E'          /
 
TFORM7  = '50331648E'          /
 
TFORM8  = '50331648B'          /
 
COMMENT
 
COMMENT  *** Column units ***
 
COMMENT
 
TUNIT1  = 'Krj km/s'          /
 
TUNIT2  = 'Krj km/s'          /
 
TUNIT3  = 'Krj km/s'          /
 
TUNIT4  = 'none    '          /
 
TUNIT5  = 'Krj km/s'          /
 
TUNIT6  = 'Krj km/s'          /
 
TUNIT7  = 'Krj km/s'          /
 
TUNIT8  = 'none    '          /
 
COMMENT
 
COMMENT  *** Planck params ***
 
COMMENT
 
EXTNAME = 'COMP-MAP'          / Extension name
 
AST-COMP= 'CO-LINE '          / Component
 
COORSYS = 'GALACTIC'          / Coordinate system
 
ORDERING= 'NESTED  '          / Healpix ordering
 
NSIDE  =                2048 / Healpix Nside
 
FIRSTPIX=                    0 /
 
LASTPIX =            50331647 /
 
BAD_DATA=        -1.63750E+30 / bad pixel value
 
FILENAME= 'HFI_CompMap_CO-line_2048_R1.01.fits' / FITS filename
 
PROCVER = 'DX9    '          / Product version
 
COMMENT
 
COMMENT  Multiply by these factors to convert Kcmb
 
COMMENT
 
CNV(1-0)=    1.42144524614E-05 / Conv factor in Kcmb/(Krj*km/s)
 
CNV(2-1)=    4.43577255985E-05 / Conv factor in Kcmb/(Krj*km/s)
 
COMMENT
 
COMMENT ------------------------------------------------------------------------
 
COMMENT HFI-DMC objects:
 
COMMENT group: /data/dmc/MISS03/DATA/CO_PRODUCT_TYPE2/
 
COMMENT Creation date  - object name
 
COMMENT 12-11-30 14:21 - 115GHz_CO_J1-0_type2
 
COMMENT 12-11-30 14:23 - 230GHz_CO_J2-1_type2
 
COMMENT 12-11-30 14:22 - 115GHz_CO_J1-0_STDDEV_type2
 
COMMENT 12-11-30 14:24 - 230GHz_CO_J2-1_STDDEV_type2
 
COMMENT 12-11-30 14:22 - 115GHz_CO_J1-0_NULL_type2
 
COMMENT 12-11-30 14:23 - 230GHz_CO_J2-1_NULL_type2
 
COMMENT 12-11-30 16:29 - 115GHz_CO_J1-0_MASK_type2
 
COMMENT 12-11-30 16:31 - 230GHz_CO_J2-1_MASK_type2
 
COMMENT ------------------------------------------------------------------------
 
END
 
 
=== Other maps ===
 
 
This section will be for the various CIB maps, and others.  The overall structure of the FITS files will be similar to the cases above, though the details will be tailored to the individual products.
 
  
== References ==
 
<biblio force=false>
 
#[[References]]
 
</biblio>
 
 
__NOTOC__
 
__NOTOC__
 
[[Category:Mission science products|007]]
 
[[Category:Mission science products|007]]

Latest revision as of 18:47, 1 March 2013

Contents of this chapter

Overview
CMB maps
Astrophysical component maps

Overview[edit]

This section is very preliminary. Its purpose is to give examples of what these products could look like.

This section describes the astrophysical component maps are similar products that are provided in a joint effort by the two DPC. These products are derived from some or all of the nine channel maps described above using different techniques and, in some cases, using other constraints from external data sets. Here we give a brief description of the product and how it is obtained, followed by a description of the FITS file containing the data and associated information.

Two different types of structure are used for these products depending on whether the astrophysical component varies with frequency:

independent of frequency 
in this case a single map to give the structure suffices. It will (optionally) be accompanied by an uncertainty map a mask and possibly a beam window function, and a method will be given to convert the structure map to the map at a given frequency. This applies to the CMB and to the dust opacity.
variable with frequency 
in this case the file will contain up to 10 signal maps, for the 10 Planck frequencies, accompanied (optionally) by uncertainties a mask.

Data Processing Center

Flexible Image Transfer Specification

Cosmic Microwave background