Difference between revisions of "Summary LFI"
Line 8: | Line 8: | ||
<math>^{ \rm a \, }</math> FWHM and ellipticity from scanning beam evaluated fitting Jupiter directly in the timelines. <math>\hspace{480mm} </math> | <math>^{ \rm a \, }</math> FWHM and ellipticity from scanning beam evaluated fitting Jupiter directly in the timelines. <math>\hspace{480mm} </math> | ||
<math>^{ \rm b \, }</math> FWHM from effective beam estimated from the main beam solid angle of the effective beam. Those are the values used in the source extraction pipeline <cite>#planck2013-p05</cite> {{P2013|28}}. | <math>^{ \rm b \, }</math> FWHM from effective beam estimated from the main beam solid angle of the effective beam. Those are the values used in the source extraction pipeline <cite>#planck2013-p05</cite> {{P2013|28}}. | ||
− | <math>{\\}</math> | + | <math>{\hspace{10mm}\}</math> |
<math>^{ \rm c \, }</math> White noise per pixel computed from half-ring difference maps. Those values are within the 1% with the white noise sensitivity computed directly on the timelines, taking in account the actual mission time minus the manoeuvres and bad-science flagged data. | <math>^{ \rm c \, }</math> White noise per pixel computed from half-ring difference maps. Those values are within the 1% with the white noise sensitivity computed directly on the timelines, taking in account the actual mission time minus the manoeuvres and bad-science flagged data. | ||
]] | ]] |
Revision as of 16:41, 23 May 2014
The LFI performance are summarized in Table 1 below. All the details can be found in the LFI data processing paper #planck2013-p02 Planck-2013-II .
Table 1. Summary of the LFI performance parameters
References[edit]
<biblio force=false>
</biblio>
(Planck) Low Frequency Instrument
Full-Width-at-Half-Maximum