Difference between revisions of "CMB spectrum & Likelihood Code"

From Planck PLA 2015 Wiki
Jump to: navigation, search
(File names and Meta data)
Line 101: Line 101:
  
 
The spectra give <math>D_\ell = \ell(\ell+1)C_\ell / 2\pi </math> in units of <math>\mu\, K^2</math>. The covariance matrices of the spectra will be released at a later time.
 
The spectra give <math>D_\ell = \ell(\ell+1)C_\ell / 2\pi </math> in units of <math>\mu\, K^2</math>. The covariance matrices of the spectra will be released at a later time.
<!--
 
  
The CMB spectrum is also given in a simple text comma-separated file:
+
The CMB spectra are also given in seven simple text files, corresponding to each of the FITS file BINTABLE extensions described above.
* ''{{PLASingleFile | fileType=cosmo | name=COM_PowerSpect_CMB_R1.10.txt |link=COM_PowerSpect_CMB_R1.10.txt}}''
 
 
 
-->
 
  
 
==Likelihood==
 
==Likelihood==

Revision as of 09:30, 6 May 2015


2015 CMB spectra[edit]

General description[edit]

TT[edit]

The Planck best-fit CMB temperature power spectrum, shown in the figure below, covers the wide range of multipoles [math] \ell [/math] = 2-2508. Over the multipole range [math] \ell [/math] = 2–29, the power spectrum is derived from the Commander: component separation algorithm applied to the combination of Planck 2015 temperature data between 30 and 857 GHz, the 9-year WMAP sky maps, and the 408 MHz Haslam et al. (1982) survey, including 93% of the sky Planck-2015-A10[1] . The asymmetric error bars associated to this spectrum are the 68% confidence limits and include the uncertainties due to foreground subtraction.

For multipoles equal or greater than [math]\ell=30[/math], instead, the spectrum is derived from the Plik likelihood Planck-2015-A11[2] by optimally combining the spectra in the frequency range 100-217 GHz, and correcting them for unresolved foregrounds using the best-fit foreground solution from a Planck TT+lowP [math]\Lambda[/math]CDM run. Associated 1-sigma errors include beam uncertainties. Both Commander and Plik are described in more details in the sections below.

The Planck 2015 TT power spectrum. Logarithmic x-scale up to [math]\ell = 30 [/math] , linear at higher [math]\ell[/math]. The red line is the Planck best-fit primordial power spectrum (cf Planck TT+lowP in Table 3 of Planck-2015-A15[3]). Residuals with respect to this model are shown in the lower panel. The error bars show [math]\pm 1\sigma[/math] uncertainties.

TE and EE[edit]

The Planck best-fit CMB polarization and temperature-polarization cross-correlation power spectra, shown in the figure below, cover the multipole range [math] \ell [/math] = 30-1996. The data points relative to the multipole range [math] \ell [/math] = 2-29 will be released at a later time. Analogously to the TT case, the [math] \ell\ge 30 [/math] spectrum is derived from the Plik likelihood Planck-2015-A11[2] by optimally combining the spectra in the frequency range 100-217 GHz, and correcting them for unresolved foregrounds using the best-fit foreground solution from a Planck TT,TE,EE+lowP [math]\Lambda[/math]CDM run.

The Planck 2015 EE power spectrum. The red line is the Planck best-fit primordial power spectrum (cf Planck TT+lowP in Table 3 of Planck-2015-A15). Residuals with respect to this model are shown in the lower panel. The error bars show [math]\pm 1\sigma[/math] uncertainties. The green lines in the lower panels show the best-fit temperature-to-polarization leakage model of Eqs. (11a) and (11b) in Planck-2015-A15.
The Planck 2015 TE power spectrum. The red line is the Planck best-fit primordial power spectrum (cf Planck TT+lowP in Table 3 of Planck-2015-A15). Residuals with respect to this model are shown in the lower panel. The error bars show [math]\pm 1\sigma[/math] uncertainties. The green lines in the lower panels show the best-fit temperature-to-polarization leakage model of Eqs. (11a) and (11b) in Planck-2015-A15.

Production process[edit]

The [math]\ell[/math] < 30 part of the Planck TT power spectrum is derived from the Commander approach, which implements Bayesian component separation in pixel space, fitting a parametric model to the data by sampling the posterior distribution for the model parameters Planck-2015-A10[1]. The power spectrum at any multipole [math]\ell[/math] is given as the maximum probability point for the posterior [math]C_\ell[/math] distribution, marginalized over the other multipoles, and the error bars are 68% confidence level; see Planck-2015-A10[1].

The [math]\ell \ge 30[/math] part of the TT, TE and EE power spectra have been derived by the Plik likelihood, a code that implements a pseudo-Cl based technique, extensively described in Sec. 2 and the Appendix of Planck-2013-XV[3] and Planck-2015-A11[2]. Frequency spectra are computed as cross-spectra between half-mission maps. Mask and multipole range choices for each frequency spectrum are summarized in Section 3.3 of Planck-2015-A13[4] and in Planck-2015-A11[2]. The final power spectrum is an optimal combination of the 100, 143, 143x217 and 217 GHz spectra, corrected for the best-fit unresolved foregrounds and inter-frequency calibration factors, as derived from the full likelihood analysis (for TT we use the best-fit solutions for the nuisance parameters from the Planck+TT+lowP data combination, while for TE and EE we use the best fit from Planck+TT+lowP, cf Table 3 of Planck-2015-A13[4]). A thorough description of the models of unresolved foregrounds is given in Planck-2015-A11[2]. The spectrum covariance matrix accounts for cosmic variance and noise contributions, together with beam uncertainties. The [math]\ell \ge 30[/math] CMB TT spectrum and associated covariance matrix are available in two formats:

  1. Unbinned. TT: 2479 bandpowers ([math]\ell=30-2508[/math]); TE or EE: 1697 bandpowers ([math]\ell=30-1996[/math]).
  2. Binned, in bins of [math] \Delta\ell=30 [/math]. TT: 83 bandpowers. TE or EE: 66 bandpowers. We bin the [math] C_\ell [/math] power spectrum with a weight proportional to [math] \ell (\ell+1) [/math], so that the [math] C_{\ell_b} [/math] binned bandpower centered in [math] \ell_b [/math] is: [math] \\ C_{\ell_b}=\Sigma_{\ell \in b} w_{\ell_b\ell} C_\ell \quad \text{with} \quad w_{\ell_b\ell}=\frac{\ell (\ell+1)}{\Sigma_{\ell \in b} \ell (\ell+1)}. \\[/math] Equivalently, using the matrix formalism, we can construct the binning matrix B as: [math]\\ B_{\ell_b \ell}=w_{\ell_b\ell} \\ [/math] where B is a [math] n_b\times n_\ell[/math] matrix, with [math]n_b=83[/math] the number of bins and [math]n_\ell=2479[/math] the number of unbinned multipoles. Thus: [math] \\ \vec{C}_\mathrm{binned}=B \, \vec{C} \\ \mathrm{cov_\mathrm{binned}}= B\, \mathrm{cov}\, B^T \\ \ell_b=B\, \ell \\ [/math] Here, [math] \vec{C}_{binned}\, (\vec{C}) [/math] is the vector containing all the binned (unbinned) [math]C_\ell[/math] bandpowers, [math]\mathrm{cov} [/math] is the covariance matrix and [math]\ell_b[/math] is the weighted average multipole in each bin. Note that following this definition, [math]\ell_b[/math] can be a non-integer. The binned [math]D_{\ell_B}[/math] power spectrum is then calculated as: [math] \\ D_{\ell_b}=\frac{\ell_b (\ell_b+1)}{2\pi} C_{\ell_b} [/math].

Inputs[edit]

Low-l spectrum ([math]\ell \lt 30[/math])
  • Planck 30 and 44 GHz frequency maps
  • Planck 70 to 857 GHz detector and detector set maps
  • 9-year WMAP temperature sky maps between 23 and 94 GHz
  • 408 MHz survey by Haslam et al. (1982)
  • Commander [math]\chi^2[/math] based LM93 confidence mask Planck-2015-A10[1]
High-l spectrum ([math]30 \le \ell \le 2508[/math])

File names and Meta data[edit]

The CMB spectrum and its covariance matrix are distributed in a single FITS file named

  • COM_PowerSpect_CMB_R2.nn.fits

which contains 7 BINTABLE extensions

1. TT low-ell, unbinned (TTLOLUNB)
with the low ell part of the spectrum, not binned, and for l=2-29. The table columns are
  1. ELL (integer): multipole number
  2. D_ELL (float): [math]D_ell[/math] as described above
  3. ERRUP (float): the upward uncertainty
  4. ERRDOWN (float): the downward uncertainty
2. TT high-ell, binned (TTHILBIN)
with the high-ell part of the spectrum, binned into 83 bins covering [math]\langle l \rangle = 47-2499\ [/math] in bins of width [math]l=30[/math] (with the exception of the last bin that is smaller). The table columns are as follows:
  1. ELL (float): mean multipole number of bin
  2. L_MIN (integer): lowest multipole of bin
  3. L_MAX (integer): highest multipole of bin
  4. D_ELL (float): [math]D_\ell[/math] as described above
  5. ERR (float): the uncertainty
3. TT high-ell unbinned (TTHILUNB)
with the high-ell part of the spectrum, unbinned, in 2979 bins covering [math]\langle l \rangle = 30-2508\ [/math]. The table columns are as follows:
  1. ELL (integer): multipole
  2. D_ELL (float): [math]D_\ell[/math] as described above
  3. ERR (float): the uncertainty
4. TE high-ell, binned (TEHILBIN)
with the high-ell part of the spectrum, binned into 83 bins covering [math]\langle l \rangle = 47-1988\ [/math] in bins of width [math]l=30[/math] (with the exception of the last bin that is smaller). The table columns are as follows:
  1. ELL (float): mean multipole number of bin
  2. L_MIN (integer): lowest multipole of bin
  3. L_MAX (integer): highest multipole of bin
  4. D_ELL (float): [math]D_\ell[/math] as described above
  5. ERR (float): the uncertainty
5. TE high-ell, unbinned (TEHILUNB)
with the high-ell part of the spectrum, unbinned, in 2979 bins covering [math]\langle l \rangle = 30-1996\ [/math]. The table columns are as follows:
  1. ELL (integer): multipole
  2. D_ELL (float): [math]D_\ell[/math] as described above
  3. ERR (float): the uncertainty
6. EE high-ell, binned (EEHILBIN)
with the high-ell part of the spectrum, binned into 83 bins covering [math]\langle l \rangle = 47-1988\ [/math] in bins of width [math]l=30[/math] (with the exception of the last bin that is smaller). The table columns are as follows:
  1. ELL (float): mean multipole number of bin
  2. L_MIN (integer): lowest multipole of bin
  3. L_MAX (integer): highest multipole of bin
  4. D_ELL (float): [math]D_\ell[/math] as described above
  5. ERR (float): the uncertainty
7. EE high-ell, unbinned (EEHILUNB)
with the high-ell part of the spectrum, unbinned, in 2979 bins covering [math]\langle l \rangle = 30-1996\ [/math]. The table columns are as follows:
  1. ELL (integer): multipole
  2. D_ELL (float): [math]D_\ell[/math] as described above
  3. ERR (float): the uncertainty

Note that R2.00 of these files contained a small error in that the effective [math]\ell[/math] of the bin in the binned data was truncated to an integer. While the [math]\ell[/math] values of the unbinned (full) data are indeed integer, the effective [math]\ell[/math] of the binned data is a weighted average of the [math]\ell[/math]'s used in the bin and it should be a real number. This is corrected in R2.01.

The spectra give [math]D_\ell = \ell(\ell+1)C_\ell / 2\pi [/math] in units of [math]\mu\, K^2[/math]. The covariance matrices of the spectra will be released at a later time.

The CMB spectra are also given in seven simple text files, corresponding to each of the FITS file BINTABLE extensions described above.

Likelihood[edit]

The likelihood code will released in March-April 2015 with an accompanying paper and an Explanatory Supplement update.

References[edit]

Cosmic Microwave background

Flexible Image Transfer Specification