Map-making LFI

From Planck PLA 2015 Wiki
Revision as of 10:11, 19 October 2012 by Hkurkis (talk | contribs)
Jump to: navigation, search

Noise Monte Carlo Simulation[edit]

Overview[edit]

Calculating and handling full pixel-to-pixel noise covariances in Planck maps if feasible only at low resolution. To support the analysis of high-resolution maps, a Monte Carlo set of noise maps were produced. These noise Monte Carlos were produced at two levels of the analysis: 1) LFI Monte Carlo (MC) as part of the LFI data processing, and 2) Full Focal Plane (FFP) Monte Carlo as part of the joint HFI/LFI data processing. This page describes the LFI noise MC. For the FFP MC, see HL-sims.

Inputs[edit]

The noise MC assumes a three-parameter noise model: white noise level ($\sigma$), slope, and knee frequency ($f_\mathrm{knee}$), so that the noise power spectrum is assumed to have the form

$ P(f) = \frac{2\sigma^2}{f_\mathrm{sample}}\left(\frac{f}{f_\mathrm{knee}}\right)^\mathrm{slope} $.

Here $f_\mathrm{sample}$ is the sampling frequency of the instrument. The noise parameters were determined separately for each radiometer

(Planck) Low Frequency Instrument

(Planck) High Frequency Instrument