Difference between revisions of "LFI-Validation"

From Planck PLA 2015 Wiki
Jump to: navigation, search
(major change - oriented to what we've done, with samples, rather than list of possibilities.)
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{DISPLAYTITLE:Internal overall validation}}
+
{{DISPLAYTITLE:Overall internal validation}}
 
== Overview ==
 
== Overview ==
 
Data validation is critical at each step of the analysis pipeline.  Much of the LFI data validation is based on null tests. Here we present some examples from the current release, with comments on relevant time scales and sensitivity to various systematics.
 
Data validation is critical at each step of the analysis pipeline.  Much of the LFI data validation is based on null tests. Here we present some examples from the current release, with comments on relevant time scales and sensitivity to various systematics.
 +
 
== Null tests approach ==
 
== Null tests approach ==
Null tests at map level are performed routinely, whenever changes are made to the mapmaking pipeline.  These include differences at survey, year, 2 year, half mission and ringhalf levels, for single detectors, horns, horn pairs and full frequency complements.  Where possible, map differences are generated in I, Q and U.  
+
Null tests at map level are performed routinely, whenever changes are made to the mapmaking pipeline.  These include differences at survey, year, 2-year, half- mission and half-ring levels, for single detectors, horns, horn pairs and full frequency complements.  Where possible, map differences are generated in <i>I</i>, <i>Q</i> and <i>U</i>.  
 
For this release, we use the Full Focal Plane 8 (FFP8) simulations for comparison. We can use FFP8 noise simulations, identical to the data in terms of sky sampling and with matching time domain noise characteristics, to make statistical arguments about the likelihood of the noise observed in the actual data nulls.
 
For this release, we use the Full Focal Plane 8 (FFP8) simulations for comparison. We can use FFP8 noise simulations, identical to the data in terms of sky sampling and with matching time domain noise characteristics, to make statistical arguments about the likelihood of the noise observed in the actual data nulls.
In general null tests are performed in order to highlight possible issues in the data related to instrumental  systematic effecst not properly accounted for within the processing pipeline, or related to known changes in the operational conditions (e.g. switch-over of the sorption coolers), or related to intrinsic instrument properties coupled with the sky signal, such as stray light contamination.
+
In general null tests are performed to highlight possible issues in the data related to instrumental  systematic effecst not properly accounted for within the processing pipeline, or related to known changes in the operational conditions (e.g., switch-over of the sorption coolers), or related to intrinsic instrument properties coupled with the sky signal, such as stray light contamination.
Such null-tests can be performed using data on different time scales ranging from one minute to one year of observations, at different unit levels (radiometer, horn, horn-pair), within frequency and cross-frequency, both in total intensity, and, when applicable, in polarisation.
+
Such null-tests can be performed by using data on different time scales ranging from 1 minute to 1 year of observations, at different unit levels (radiometer, horn, horn-pair), within frequency and cross-frequency, both in total intensity, and, when applicable, in polarization.
 +
 
 
=== Sample Null Maps ===
 
=== Sample Null Maps ===
[[File:PlanckFig_map_Diff070full_ringhalf_1-full_ringhalf_2sm3I_Stokes_88mm.pdf|thumb|center|400px|]][[File:PlanckFig_map_Diff070full_ringhalf_1-full_ringhalf_2sm3Q_Stokes_88mm.pdf|thumb|center|400px|]]
+
 
[[File:PlanckFig_map_Diff070yr1+yr3-yr2+yr4sm3Q_Stokes_88mm.pdf|thumb|center|400px|]][[File:PlanckFig_map_Diff070yr1+yr3-yr2+yr4sm3I_Stokes_88mm.pdf|thumb|center|400px|'''70 GHz null map samples: top to bottom, ringhalf differences I, Q, 2 year combination differences I, Q. All maps smoothed to 3 degrees''']]
+
<gallery mode="nolines">
 +
File:PlanckFig_map_Diff030full_ringhalf_1-full_ringhalf_2sm3I_Stokes_88mm.png
 +
File:PlanckFig_map_Diff030full_ringhalf_1-full_ringhalf_2sm3Q_Stokes_88mm.png
 +
File:PlanckFig_map_Diff030yr1+yr3-yr2+yr4sm3Q_Stokes_88mm.png
 +
File:PlanckFig_map_Diff030yr1+yr3-yr2+yr4sm3I_Stokes_88mm.png
 +
</gallery>
 +
<gallery mode="nolines">
 +
File:PlanckFig_map_Diff044full_ringhalf_1-full_ringhalf_2sm3I_Stokes_88mm.png
 +
File:PlanckFig_map_Diff044full_ringhalf_1-full_ringhalf_2sm3Q_Stokes_88mm.png
 +
File:PlanckFig_map_Diff044yr1+yr3-yr2+yr4sm3Q_Stokes_88mm.png
 +
File:PlanckFig_map_Diff044yr1+yr3-yr2+yr4sm3I_Stokes_88mm.png
 +
</gallery>
 +
<gallery mode="nolines">
 +
File:PlanckFig_map_Diff070full_ringhalf_1-full_ringhalf_2sm3I_Stokes_88mm.png
 +
File:PlanckFig_map_Diff070full_ringhalf_1-full_ringhalf_2sm3Q_Stokes_88mm.png
 +
File:PlanckFig_map_Diff070yr1+yr3-yr2+yr4sm3Q_Stokes_88mm.png
 +
File:PlanckFig_map_Diff070yr1+yr3-yr2+yr4sm3I_Stokes_88mm.png
 +
</gallery>
 +
'''<small>Figure 1: Null map samples for 30GHz (top), 44GHz (middle), and 70GHz (bottom).  From left to right: half-ring differences in <i>I</i> and <i>Q</i>; 2-year combination differences in <i>I</i> and <i>Q</i>. All maps are smoothed to 3&deg;.</small>'''
  
  
 
Three things are worth pointing out generally about these maps.
 
Three things are worth pointing out generally about these maps.
First- there are no obvious 'features' standing out at this resolution and noise level. Earlier versions of the data processing, where there were errors in calibration for instance, would show scan-correlated structures at much larger amplitude.
+
Firstly, there are no obvious "features" standing out at this resolution and noise level. Earlier versions of the data processing, where there were errors in calibration for instance, would show scan-correlated structures at much larger amplitude.
Second- The half-ring difference maps and the2 year combination differnce maps give a very similar overall impression. This is a very good sign, as these two typese of null cover very different time scales (1 hour to 2 years).
+
Secondly, the half-ring difference maps and the 2-year combination difference maps give a very similar overall impression. This is a very good sign, as these two types of null map cover very different time scales (1 hour to 2 years).
Third- Its impossible to know how 'good' the test is just by looking at the map. There is clearly noise, but determining if it is consistent with the noise model of the instrument, and further, if it will bias the scientific results, requires more analsysis.
+
Thirdly, it is impossible to know how "good" the test is just by looking at the map. There is clearly noise, but determining if it is consistent with the noise model of the instrument, and further, if it will bias the scientific results, requires more analysis.
 +
 
 
===Statistical Analyses===
 
===Statistical Analyses===
 
The next level of data compression is to use the angular power spectra of the null tests, and to compare to simulations in a statistically robust way. We use two different approaches.   
 
The next level of data compression is to use the angular power spectra of the null tests, and to compare to simulations in a statistically robust way. We use two different approaches.   
In the first we compare pseudospectra of the null maps to the half ring spectra, which are the most 'free' of anticipated systmatics.  
+
In the first we compare pseudo-spectra of the null maps to the half-ring spectra, which are the most "free" of anticipated systmatics.  
In the second, we use noise monte carlos from the FFP8 simulations, where we run the mapmaking identically to the real data, over data sets with identical sampling to the real data but consisting of noise only generated to match the per-detector LFI noise model.  
+
In the second, we use noise Monte Carlos from the FFP8 simulations, where we run the mapmaking identically to the real data, over data sets with identical sampling to the real data but consisting of noise only generated to match the per-detector LFI noise model.
 +
 
 +
Here we show examples comparing the pseudo-spectra of a set of 100 Monte Carlos to the real data. We mask both data and simlations to concentrate on residuals impacting CMB analyses away from the Galactic plane.
 +
 
 +
[[File:null_cl_ffp8_070yr1+yr3-yr2+yr4_TT_lin_88mm.png|thumb|center|400px]]
 +
[[File:null_cl_ffp8_070yr1+yr3-yr2+yr4_TT_log88mm.png|thumb|center|400px|'''Figure 2: Pseudo-spectrum comparison (70GHz <i>TT</i>) of 2-year data difference (Year(1+3)-Year(2+4) in green) to the FFP8 simulation distribution (blue error bars).''']]
 +
 
 +
[[File:null_cl_ffp8_070yr1+yr3-yr2+yr4_EE_lin_88mm.png|thumb|center|400px]]
 +
[[File:null_cl_ffp8_070yr1+yr3-yr2+yr4_EE_log88mm.png|thumb|center|400px|'''Figure 3: Pseudo-spectrum comparison (70GHz <i>EE</i>) of 2-year data difference (Year(1+3)-Year(2+4) in green) to the FFP8 simulation distribution (blue error bars).''']]
 +
 
 +
[[File:null_cl_ffp8_070yr1+yr3-yr2+yr4_BB_lin_88mm.png|thumb|center|400px]]
 +
[[File:null_cl_ffp8_070yr1+yr3-yr2+yr4_BB_log88mm.png|thumb|center|400px|'''Figure 4: Pseudo-spectrum comparison(70GHz <i>BB</i>) of 2-year data difference (Year(1+3)-Year(2+4) in green) to the FFP8 simulation distribution (blue error bars).''']]
 +
 
 +
Finally, we can look at the distribution of noise power from the Monte Carlos "&#8467; by &#8467;" and check where the real data fall in that distribution, to see if it is consistent with noise alone.
  
Together with images, power spectra of the residual are also produced and compared with the expected level of white noise
+
[[File:ffp8_dist_070full-survey_1survey_3_TT88mm_nt.png|350px|]]
derived from the half-ring jack-knifes. With these quantities are combined to produce a sort of <math>\chi^2</math>. This gives an indication of the deviation of the residuals with respect to the white noise level. Of course underlying signal does not posses a Gaussian statistic and therefore with non-Gaussian data, the <math>\chi^2</math> tests is less meaningful. However this gives an hint on the presence of residuals which in some cases are indeed expected: in fact making difference between odd and even survey at horn and frequency level, is a way to show the signature of the external stray-light which, although properly accounted for during the calibration procedure, has not been removed from the data.
+
[[File:ffp8_dist_070full-survey_1survey_3_EE88mm_nt.png|350px|]]
 +
[[File:ffp8_dist_070full-survey_1survey_3_BB88mm_nt.png|350px|]]
  
 +
'''<small>Figure 5: Sample 70GHz null test in comparison with FFP8 null distribution for multipoles from 2 to 4. From left to right we show <i>TT</i>, <i>EE</i>, <i>BB</i>. In this case, the null test is the full mission map - (Survey 1+Survey 3). We report the probability to exceed (PTE) values for the data relative to the FFP8 noise-only distributions. All values for this example are very reasonable, suggesting that our noise model captures the important features of the data even at low multipoles.</small>'''
  
Here we show examples comparing the pseudospectra of a set of 100 monte carlos to the real data. We mask both data and simlations to concentrate on residuals impactin CMB analyses away from the galactic plane.
 
(I'll include some plots of error bars from FFP8 per ell overlaid with data nulls (maybe same nulls as above)
 
Finally, we can look at the distribution of noise power from the monte carlos 'ell by ell' and check where the real data fall in that distribution, to see if it is consistent with noise alone.
 
(here I'll put some of the histogram comparisons for the low ell as seen in the DPC paper)
 
 
==Consistency checks ==
 
==Consistency checks ==
  
All the details can be found in {{PlanckPapers|planck2013-p02}} {{PlanckPapers|planck2014-a03||Planck-2015-A03}}.  
+
All the details of consistency tests performed can be found in {{PlanckPapers|planck2013-p02}} and {{PlanckPapers|planck2014-a03||Planck-2015-A03}}.  
  
===Intra frequency consistency check===
+
===Intra-frequency consistency check===
We have tested the consistency between 30, 44, and 70 GHz maps by comparing the power spectra in the multipole range around the first acoustic peak. In order to do so, we have removed the estimated contribution from unresolved point source from the spectra. We have then built the scatter plots for the three frequency pairs, i.e. 70 vs 30 GHz, 70 vs 44 GHz, and 44 vs 30 GHz, and performed a linear fit accounting for errors on both axis.
+
We have tested the consistency between 30, 44, and 70GHz maps by comparing the power spectra in the multipole range around the first acoustic peak. In order to do so, we have removed the estimated contribution from unresolved point source from the spectra. We have then built scatter plots for the three frequency pairs, i.e., 70GHz versus 30 GHz, 70GHz versus 44GHz, and 44GHz versus 30GHz, and performed a linear fit, accounting for errors on both axes.
The results reported in Fig. 1 show that the three power spectra are consistent within the errors. Moreover, please note that current error budget does not account for foreground removal, calibration, and window function uncertainties. Hence, the resulting agreement between spectra at different frequencies can be fairly considered even more significant.
+
The results reported in Fig. 6 show that the three power spectra are consistent within the errors. Moreover, note that the current error budget does not account for foreground removal, calibration, and window function uncertainties. Hence, the observed agreement between spectra at different frequencies can be considered to be even more satisfactory.
  
[[File:LFI_70vs44_DX11D_maskTCS070vs060_a.jpg|thumb|center|400px|]][[File:LFI_70vs30_DX11D_maskTCS070vs040_a.jpg|thumb|center|400px|]][[File:LFI_44vs30_DX11D_maskTCS060vs040_a.jpg|thumb|center|400px|'''Figure 1. Consistency between spectral estimates at different frequencies. From top to bottom: 70 vs 44 GHz; 70 vs 30 GHz; 44 vs 30 GHz. Solid red lines are the best fit of the linear regressions, whose angular coefficients <math>\alpha</math> are consistent with 1 within the errors.''']]
+
[[File:LFI_70vs44_DX11D_maskTCS070vs060_a.jpg|thumb|center|400px|]][[File:LFI_70vs30_DX11D_maskTCS070vs040_a.jpg|thumb|center|400px|]][[File:LFI_44vs30_DX11D_maskTCS060vs040_a.jpg|thumb|center|400px|'''Figure 6: Consistency between spectral estimates at different frequencies. From top to bottom: 70GHz versus 44 GHz; 70GHz versus 30 GHz; and 44GHz versus 30 GHz. Solid red lines are the best fit of the linear regressions, whose angular coefficients &alpha; are consistent with unity within the errors.''']]
  
 
===70 GHz internal consistency check===
 
===70 GHz internal consistency check===
We use the Hausman test {{BibCite|polenta_CrossSpectra}} to assess the consistency of auto and cross spectral estimates at 70 GHz. We define the statistic:
+
We use the Hausman test {{BibCite|polenta_CrossSpectra}} to assess the consistency of auto- and cross-spectral estimates at 70 GHz. We specifically define the statistic:
  
 
:<math>
 
:<math>
H_{\ell}=\left(\hat{C_{\ell}}-\tilde{C_{\ell}}\right)/\sqrt{Var\left\{ \hat{C_{\ell}}-\tilde{C_{\ell}}\right\} }
+
H_{\ell}=\left(\hat{C_{\ell}}-\tilde{C_{\ell}}\right)/\sqrt{{\rm Var}\left\{ \hat{C_{\ell}}-\tilde{C_{\ell}}\right\} },
 
</math>
 
</math>
  
where <math>\hat{C_{\ell}}</math> and <math>\tilde{C_{\ell}}</math> represent auto- and
+
where <math>\hat{C_{\ell}}</math> and <math>\tilde{C_{\ell}}</math> represent auto- and
cross-spectra respectively. In order to combine information from different multipoles into a single quantity, we define the following quantity:
+
cross-spectra, respectively. In order to combine information from different multipoles into a single quantity, we define
  
 
:<math>
 
:<math>
B_{L}(r)=\frac{1}{\sqrt{L}}\sum_{\ell=2}^{[Lr]}H_{\ell},r\in\left[0,1\right]
+
B_{L}(r)=\frac{1}{\sqrt{L}}\sum_{\ell=2}^{[Lr]}H_{\ell},r\in\left[0,1\right],
 
</math>
 
</math>
  
where <math>[.]</math> denotes integer part. The distribution of <math>B_{L}(r)</math>
+
where square brackets denote the integer part. The distribution of <i>B<sub>L</sub></i>(<i>r</i>)
 
converges (in a functional sense) to a Brownian motion process, which can be studied through the statistics
 
converges (in a functional sense) to a Brownian motion process, which can be studied through the statistics
<math>s_{1}=\textrm{sup}_{r}B_{L}(r)</math>
+
<i>s</i><sub>1</sub>=sup<sub><i>r</i></sub><i>B<sub>L</sub></i>(<i>r</i>),
<math>s_{2}=\textrm{sup}_{r}|B_{L}(r)|</math> and
+
<i>s</i><sub>2</sub>=sup<sub><i>r</i></sub>|<i>B<sub>L</sub></i>(<i>r</i>)|, and
<math>s_{3}=\int_{0}^{1}B_{L}^{2}(r)dr</math>. Using the ''FFP7'' simulations
+
<i>s</i><sub>3</sub>=&#8747;<sub>0</sub><sup>1</sup><i>B<sub>L</sub></i><sup>2</sup>(<i>r</i>)dr. Using the "FFP7" simulations,
we derive the empirical distribution for all the three test statistics and we compare with results obtained from Planck data
+
we derive empirical distributions for all the three test statistics and compare with results obtained from Planck data
(see Fig. 2). Thus, the Hausman test shows no statistically significant inconsistencies between the two spectral
+
(see Fig. 7). We find that the Hausman test shows no statistically significant inconsistencies between the two spectral
 
estimates.
 
estimates.
  
[[File:cons2.jpg|thumb|center|800px|'''Figure 2. From left to right, the empirical
+
[[File:cons2.jpg|thumb|center|800px|'''Figure 7: From left to right, the empirical
distribution (estimated via ''FFP7'') of the <math>s_{1},s_{2},s_{3}</math>
+
distribution (estimated via FFP7) of the <i>s</i><sub>1</sub>, <i>s</i><sub>2</sub>, and <i>s</i><sub>3</sub>
statistics (see text). The vertical line represents 70 GHz data.''']]
+
statistics (see text). The vertical line represents 70GHz data.''']]
  
As a further test, we have estimated the temperature power spectrum for each of three horn-pair map, and we have compared the
+
As a further test, we have estimated the temperature power spectrum for each of three horn-pair maps, and have compared the
results with the spectrum obtained from all the 12 radiometers shown above. In Fig. 3 we show the
+
results with the spectrum obtained from all 12 radiometers shown above. In Fig. 8 we plot the
 
difference between the horn-pair and the combined power spectra.
 
difference between the horn-pair and the combined power spectra.
Again, the error bars have been estimated from the ''FFP7'' simulated dataset. A <math>\chi^{2}</math> analysis of the residual shows that they are compatible with the null hypothesis, confirming the
+
Again, the error bars have been estimated from the FFP7 simulated data set. A &chi;<sup>2</sup> analysis of the residual shows that they are compatible with the null hypothesis, confirming the
 
strong consistency of the estimates.
 
strong consistency of the estimates.
  
[[File:cons3.jpg|thumb|center|500px|'''Figure 3. Residuals between the auto power spectra of the horn pair maps and the power spectrum of the full 70 GHz frequency map. Error bars are derived from ''FFP7'' simulations.''']]
+
[[File:cons3.jpg|thumb|center|500px|'''Figure 8: Residuals between the auto-power spectra of the horn-pair maps and the power spectrum of the full 70GHz frequency map. Error bars here are derived from FFP7 simulations.''']]
  
 
<!--
 
<!--

Latest revision as of 13:37, 19 September 2016

Overview[edit]

Data validation is critical at each step of the analysis pipeline. Much of the LFI data validation is based on null tests. Here we present some examples from the current release, with comments on relevant time scales and sensitivity to various systematics.

Null tests approach[edit]

Null tests at map level are performed routinely, whenever changes are made to the mapmaking pipeline. These include differences at survey, year, 2-year, half- mission and half-ring levels, for single detectors, horns, horn pairs and full frequency complements. Where possible, map differences are generated in I, Q and U. For this release, we use the Full Focal Plane 8 (FFP8) simulations for comparison. We can use FFP8 noise simulations, identical to the data in terms of sky sampling and with matching time domain noise characteristics, to make statistical arguments about the likelihood of the noise observed in the actual data nulls. In general null tests are performed to highlight possible issues in the data related to instrumental systematic effecst not properly accounted for within the processing pipeline, or related to known changes in the operational conditions (e.g., switch-over of the sorption coolers), or related to intrinsic instrument properties coupled with the sky signal, such as stray light contamination. Such null-tests can be performed by using data on different time scales ranging from 1 minute to 1 year of observations, at different unit levels (radiometer, horn, horn-pair), within frequency and cross-frequency, both in total intensity, and, when applicable, in polarization.

Sample Null Maps[edit]

Figure 1: Null map samples for 30GHz (top), 44GHz (middle), and 70GHz (bottom). From left to right: half-ring differences in I and Q; 2-year combination differences in I and Q. All maps are smoothed to 3°.


Three things are worth pointing out generally about these maps. Firstly, there are no obvious "features" standing out at this resolution and noise level. Earlier versions of the data processing, where there were errors in calibration for instance, would show scan-correlated structures at much larger amplitude. Secondly, the half-ring difference maps and the 2-year combination difference maps give a very similar overall impression. This is a very good sign, as these two types of null map cover very different time scales (1 hour to 2 years). Thirdly, it is impossible to know how "good" the test is just by looking at the map. There is clearly noise, but determining if it is consistent with the noise model of the instrument, and further, if it will bias the scientific results, requires more analysis.

Statistical Analyses[edit]

The next level of data compression is to use the angular power spectra of the null tests, and to compare to simulations in a statistically robust way. We use two different approaches. In the first we compare pseudo-spectra of the null maps to the half-ring spectra, which are the most "free" of anticipated systmatics. In the second, we use noise Monte Carlos from the FFP8 simulations, where we run the mapmaking identically to the real data, over data sets with identical sampling to the real data but consisting of noise only generated to match the per-detector LFI noise model.

Here we show examples comparing the pseudo-spectra of a set of 100 Monte Carlos to the real data. We mask both data and simlations to concentrate on residuals impacting CMB analyses away from the Galactic plane.

Null cl ffp8 070yr1+yr3-yr2+yr4 TT lin 88mm.png
Figure 2: Pseudo-spectrum comparison (70GHz TT) of 2-year data difference (Year(1+3)-Year(2+4) in green) to the FFP8 simulation distribution (blue error bars).
Null cl ffp8 070yr1+yr3-yr2+yr4 EE lin 88mm.png
Figure 3: Pseudo-spectrum comparison (70GHz EE) of 2-year data difference (Year(1+3)-Year(2+4) in green) to the FFP8 simulation distribution (blue error bars).
Null cl ffp8 070yr1+yr3-yr2+yr4 BB lin 88mm.png
Figure 4: Pseudo-spectrum comparison(70GHz BB) of 2-year data difference (Year(1+3)-Year(2+4) in green) to the FFP8 simulation distribution (blue error bars).

Finally, we can look at the distribution of noise power from the Monte Carlos "ℓ by ℓ" and check where the real data fall in that distribution, to see if it is consistent with noise alone.

Ffp8 dist 070full-survey 1survey 3 TT88mm nt.png Ffp8 dist 070full-survey 1survey 3 EE88mm nt.png Ffp8 dist 070full-survey 1survey 3 BB88mm nt.png

Figure 5: Sample 70GHz null test in comparison with FFP8 null distribution for multipoles from 2 to 4. From left to right we show TT, EE, BB. In this case, the null test is the full mission map - (Survey 1+Survey 3). We report the probability to exceed (PTE) values for the data relative to the FFP8 noise-only distributions. All values for this example are very reasonable, suggesting that our noise model captures the important features of the data even at low multipoles.

Consistency checks[edit]

All the details of consistency tests performed can be found in Planck-2013-II[1] and Planck-2015-A03[2].

Intra-frequency consistency check[edit]

We have tested the consistency between 30, 44, and 70GHz maps by comparing the power spectra in the multipole range around the first acoustic peak. In order to do so, we have removed the estimated contribution from unresolved point source from the spectra. We have then built scatter plots for the three frequency pairs, i.e., 70GHz versus 30 GHz, 70GHz versus 44GHz, and 44GHz versus 30GHz, and performed a linear fit, accounting for errors on both axes. The results reported in Fig. 6 show that the three power spectra are consistent within the errors. Moreover, note that the current error budget does not account for foreground removal, calibration, and window function uncertainties. Hence, the observed agreement between spectra at different frequencies can be considered to be even more satisfactory.

LFI 70vs44 DX11D maskTCS070vs060 a.jpg
LFI 70vs30 DX11D maskTCS070vs040 a.jpg
Figure 6: Consistency between spectral estimates at different frequencies. From top to bottom: 70GHz versus 44 GHz; 70GHz versus 30 GHz; and 44GHz versus 30 GHz. Solid red lines are the best fit of the linear regressions, whose angular coefficients α are consistent with unity within the errors.

70 GHz internal consistency check[edit]

We use the Hausman test [3] to assess the consistency of auto- and cross-spectral estimates at 70 GHz. We specifically define the statistic:

[math] H_{\ell}=\left(\hat{C_{\ell}}-\tilde{C_{\ell}}\right)/\sqrt{{\rm Var}\left\{ \hat{C_{\ell}}-\tilde{C_{\ell}}\right\} }, [/math]

where [math]\hat{C_{\ell}}[/math] and [math]\tilde{C_{\ell}}[/math] represent auto- and cross-spectra, respectively. In order to combine information from different multipoles into a single quantity, we define

[math] B_{L}(r)=\frac{1}{\sqrt{L}}\sum_{\ell=2}^{[Lr]}H_{\ell},r\in\left[0,1\right], [/math]

where square brackets denote the integer part. The distribution of BL(r) converges (in a functional sense) to a Brownian motion process, which can be studied through the statistics s1=suprBL(r), s2=supr|BL(r)|, and s3=∫01BL2(r)dr. Using the "FFP7" simulations, we derive empirical distributions for all the three test statistics and compare with results obtained from Planck data (see Fig. 7). We find that the Hausman test shows no statistically significant inconsistencies between the two spectral estimates.

Figure 7: From left to right, the empirical distribution (estimated via FFP7) of the s1, s2, and s3 statistics (see text). The vertical line represents 70GHz data.

As a further test, we have estimated the temperature power spectrum for each of three horn-pair maps, and have compared the results with the spectrum obtained from all 12 radiometers shown above. In Fig. 8 we plot the difference between the horn-pair and the combined power spectra. Again, the error bars have been estimated from the FFP7 simulated data set. A χ2 analysis of the residual shows that they are compatible with the null hypothesis, confirming the strong consistency of the estimates.

Figure 8: Residuals between the auto-power spectra of the horn-pair maps and the power spectrum of the full 70GHz frequency map. Error bars here are derived from FFP7 simulations.


References[edit]

  1. Planck 2013 results. II. Low Frequency Instrument data processing, Planck Collaboration, 2014, A&A, 571, A2
  2. Planck 2015 results. II. LFI processing, Planck Collaboration, 2016, A&A, 594, A2.
  3. Unbiased estimation of an angular power spectrum, G. Polenta, D. Marinucci, A. Balbi, P. de Bernardis, E. Hivon, S. Masi, P. Natoli, N. Vittorio, J. Cosmology Astropart. Phys., 11, 1, (2005).

(Planck) Low Frequency Instrument

Cosmic Microwave background

[LFI meaning]: absolute calibration refers to the 0th order calibration for each channel, 1 single number, while the relative calibration refers to the component of the calibration that varies pointing period by pointing period.