Difference between revisions of "CMB and astrophysical component maps"

From Planck PLA Wiki
Jump to: navigation, search
 
(24 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
== Overview ==
 
== Overview ==
 +
  
 
This section describes the maps of astrophysical components produced from the Planck data.  These products are derived from some or all of the nine frequency channel maps described above using different techniques and, in some cases, using other constraints from external data sets. Here we give a brief description of the product and how it is obtained, followed by a description of the FITS file containing the data and associated information.
 
This section describes the maps of astrophysical components produced from the Planck data.  These products are derived from some or all of the nine frequency channel maps described above using different techniques and, in some cases, using other constraints from external data sets. Here we give a brief description of the product and how it is obtained, followed by a description of the FITS file containing the data and associated information.
All the details can be found in <cite>#planck2013-p06</cite>.
+
All the details can be found in {{PlanckPapers|planck2013-p06}}.
  
 
==CMB maps==
 
==CMB maps==
  
Four pipelines have been used to produce maps of the CMB: Commander-Ruler, NILC, SEVEM and SMICA. The last three have been delivered as Legacy Archive products.
 
  
The front-runner CMB map is the SMICA one. This product is labeled as "Main product" in the Planck Legacy Archive Java interface while the two others (NILC, SEVEM) are labeled as "Additional product".
+
CMB maps have been produced by the SMICA, NILC, SEVEM and COMMANDER-Ruler pipelines. Of these, the SMICA product is considered the preferred one overall and is labelled ''Main product'' in the Planck Legacy Archive, while the other two are labeled as ''Additional product''.
  
The component separation pipelines are described in the [[Astrophysical_component_separation#CMB_and_foreground_separation|CMB and foreground separation]] section and also in Section 3 and Appendices A-D of <cite>#planck2013-p06</cite> {{P2013|12}} and references therein.
+
SMICA and NILC also produce ''inpainted'' maps, in which the Galactic Plane, some bright regions and masked point sources are replaced with a constrained CMB realization such that the whole map has the same statistical distribution as the observed CMB.
  
===Product description ===
+
The results of SMICA, NILC and SEVEM pipeline are distributed as a FITS file containing 4 extensions:
 +
# CMB maps and ancillary products (3 or 6 maps)
 +
# CMB-cleaned foreground maps from LFI (3 maps)
 +
# CMB-cleaned foreground maps from HFI (6 maps)
 +
# Effective beam of the CMB maps (1 vector)
  
; SMICA
+
The results of COMMANDER-Ruler are distributed as two FITS files (the high and low resolution) containing the following extensions:
 +
High resolution N$_\rm{side}$=2048 (note that we don't provide the CMB-cleaned foregrounds maps for LFI and HFI because the Ruler resolution (~7.4') is lower than the HFI highest channel and and downgrading it will introduce noise correlation).
 +
# CMB maps and ancillary products (4 maps)
 +
# Effective beam of the CMB maps (1 vector)
  
* Principle:
+
Low resolution N$_\rm{side}$=256
SMICA produces a CMB map by linearly combining all Planck
+
# CMB maps and ancillary products (3 maps)
input channels (from 30 to 857 GHz) with weights which vary with the
+
# 10 example CMB maps used in the montecarlo realization (10 maps)
multipole.  It includes multipoles up to <math>\ell = 4000</math>.
+
# Effective beam of the CMB maps (1 vector)
  
* Resolution (effective beam):
+
For a complete description of the data structure, see the [[#File names and structure | below]]; the content of the first extensions is illustrated and commented in the table below.
The SMICA map has an effective beam window function of 5 arc-minutes,
 
deconvolved from the pixel window.  It means that, ideally, one would
 
have <math>C_\ell(map) = C_\ell(sky) * B_{(5')}^2</math>, where
 
<math>C_\ell(map)</math> is the angular spectrum of the map, where
 
<math>C_\ell(sky)</math> is the angular spectrum of the CMB and
 
<math>B_{(5')}</math> is a 5-arcminute Gaussian beam function.
 
  
* Confidence mask:
 
a confidence mask is provided which excludes some
 
parts of the Galactic plane, some very bright areas and the masked
 
point sources.
 
  
* Undefined pixels:
+
{| class="wikitable"  border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:center" style="background:#efefef;"
The SMICA map has valid pixels over 97% of the
+
|+ style="background:#eeeeee;" | '''The maps (CMB, noise, masks) contained in the first extension'''
sky: a binary mask describing the valid pixels is provided (as the 4th
+
|-
column of the FITS file). The 3% invalid pixels are not set to zero
+
!width=40px | Col name
(or to some NaN value): their values result from the pre-processing
+
!width=200px| SMICA
step in which this area is filled-in by a smooth field in order to
+
!width=200px| NILC
avoid spectral leakage.
+
!width=200px| SEVEM
 +
!width=200px| COMMANDER-Ruler H
 +
!width=200px| COMMANDER-Ruler L
 +
!width=300px| Description / notes
 +
|-
 +
| align="left" | 1: I
 +
| [[File: CMB-smica.png|200px]]
 +
| [[File: CMB-nilc.png|200px]]
 +
| [[File: CMB-sevem.png|200px]]
 +
| [[File: CMB-CR_h.png|200px]]
 +
| [[File: CMB-CR_l.png|200px]]
 +
| Raw CMB anisotropy map.  These are the maps used in the component separation paper {{PlanckPapers|planck2013-p06}}.
 +
|-
 +
| 2: NOISE
 +
| [[File: CMBnoise-smica.png|200px]]
 +
| [[File: CMBnoise-nilc.png|200px]]
 +
| [[File: CMBnoise-sevem.png|200px]]
 +
| [[File: CMBnoise-CR_h.png|200px]]
 +
| align='center' | not applicable
 +
| Noise map.  Obtained by propagating the half-ring noise through the CMB cleaning pipelines.
 +
|-
 +
| 3: VALMASK
 +
| [[File: valmask-smica.png|200px]]
 +
| [[File: valmask-nilc.png|200px]]
 +
| [[File: valmask-sevem.png|200px]]
 +
| [[File: valmask-cr_h.png|200px]]
 +
| [[File: valmask-cr_l.png|200px]]
 +
| Confidence map. Pixels with an expected low level of foreground contamination.  These maps are only indicative and obtained by different ad hoc methods.  They cannot be used to rank the CMB maps.
 +
|-
 +
| 4: I_MASK
 +
| [[File: cmbmask-smica.png|200px]]
 +
| [[File: cmbmask-nilc.png|200px]]
 +
| align='center' | not applicable
 +
| align='center' | not applicable
 +
| align='center' | not applicable
 +
| Some areas are masked for the production of the raw CMB maps (for NILC: point sources from 44 GHz to 857 GHz; for SMICA: point sources from 30 GHz to 857 GHz, Galatic region and additional bright regions).
 +
|-
 +
| 5: INP_CMB
 +
| [[File: CMBinp-smica.png|200px]]
 +
| [[File: CMBinp-nilc.png|200px]]
 +
| align='center' | not applicable
 +
| align='center' | not applicable
 +
| align='center' | not applicable
 +
| Inpainted CMB map.  The raw CMB maps with some regions (as indicated by INP_MASK) replaced by a constrained Gaussian realization.  The inpainted SMICA map was used for PR.
 +
|-
 +
| 6: INP_MASK
 +
| [[File: inpmask-smica.png|200px]]
 +
| [[File: inpmask-nilc.png|200px]]
 +
| align='center' | not applicable
 +
| align='center' | not applicable
 +
| align='center' | not applicable
 +
| Mask of the inpainted regions.  For SMICA, this is identical to I_MASK.  For NILC, it is not.
 +
|}
  
 +
The component separation pipelines are described in the [[Astrophysical_component_separation#CMB_and_foreground_separation|CMB and foreground separation]] section and also in Section 3 and Appendices A-D of {{PlanckPapers|planck2013-p06}} and references therein.
  
 +
The union (or common) mask is defined as the union of the confidence masks from the four component separation pipelines, the three listed above and Commander-Ruler. It leaves 73% of the sky available, and so it is denoted as U73.
  
; NILC
 
  
* Principle:
+
===Product description ===
The Needlet-ILC (hereafter NILC) CMB map is constructed
 
from all Planck channels from 44 to 857 GHz and includes multipoles up
 
to <math>\ell = 3200</math>.  It is obtained by applying the Internal
 
Linear Combination (ILC) technique in needlet space, that is, with
 
combination weights which are allowed to vary over the sky and over
 
the whole multipole range.
 
  
* Confidence mask:
+
====SMICA====
a confidence mask is provided which excludes some
 
parts of the Galactic plane, some very bright areas and the masked
 
point sources.
 
  
* Undefined pixels:
+
; Principle
The NILC data structure contains an "INPMASK" '''which should be ignored'''.
+
: SMICA produces a CMB map by linearly combining all Planck input channels (from 30 to 857 GHz) with weights which vary with the multipole.  It includes multipoles up to <math>\ell = 4000</math>.
 +
; Resolution (effective beam)
 +
: The SMICA map has an effective beam window function of 5 arc-minutes truncated at <math>\ell=4000</math> '''and deconvolved from the pixel window'''.  It means that, ideally, one would have <math>C_\ell(map) = C_\ell(sky) * B_\ell(5')^2</math>, where <math>C_\ell(map)</math> is the angular spectrum of the map, where <math>C_\ell(sky)</math> is the angular spectrum of the CMB and <math>B_\ell(5')</math> is a 5-arcminute Gaussian beam function.  Note however that, by convention, the effective beam window function <math>B_\ell(fits)</math> provided in the FITS file does include a pixel window function.  Therefore, it is equal to <math>B_\ell(fits) = B_\ell(5') / p_\ell(2048)</math> where <math>p_\ell(2048)</math> denotes the pixel window function for an Nside=2048 pixelization.
 +
; Confidence mask
 +
: A confidence mask is provided which excludes some parts of the Galactic plane, some very bright areas and the masked point sources.  This mask provides a qualitative (and subjective) indication of the cleanliness of a pixel.
 +
; Masks and inpainting
 +
: The raw SMICA CMB map has valid pixels except at the location of masked areas: point sources, Galactic plane, some other bright regions.  Those invalid pixels are indicated with the mask named 'I_MASK'.  The raw SMICA map has been inpainted, producing the map named "INP_CMB".  Inpainting consists in replacing some pixels (as indicated by the mask named INP_MASK) by the values of a constrained Gaussian realization which is computed to ensure good statistical properties of the whole map (technically, the inpainted pixels are a sample realisation drawn under the posterior distribution given the un-masked pixels.
  
 +
====NILC====
  
; SEVEM
+
; Principle
 +
: The Needlet-ILC (hereafter NILC) CMB map is constructed from all Planck channels from 44 to 857 GHz and includes multipoles up to <math>\ell = 3200</math>.  It is obtained by applying the Internal Linear Combination (ILC) technique in needlet space, that is, with combination weights which are allowed to vary over the sky and over the whole multipole range.
 +
; Resolution (effective beam)
 +
: As in the SMICA product except that there is no abrupt truncation at <math>\ell_{max}= 3200</math> but a smooth transition to <math>0</math> over the range <math>2700\leq\ell\leq 3200</math>.
 +
; Confidence mask
 +
: A confidence mask is provided which excludes some parts of the Galactic plane, some very bright areas and the masked point sources.  This mask provides a qualitative indication of the cleanliness of a pixel.  The threshold is somewhat arbitrary.
 +
; Masks and inpainting
 +
: The raw NILC map has valid pixels except at the location of masked point sources.  This is indicated with the mask named 'I_MASK'.  The raw NILC map has been inpainted, producing the map named "INP_CMB".  The inpainting consists in replacing some pixels (as indicated by the mask named INP_MASK) by the values of a constrained Gaussian realization which is computed to ensure good statistical properties of the whole map (technically, the inpainted pixels are a sample realisation drawn under the posterior distribution given the un-masked pixels.
  
The aim of SEVEM is to produce clean CMB maps at one or several frequencies by using a procedure based on template fitting. The templates are internal, i.e., they are constructed from Planck data, avoiding the need for external data sets, which usually complicates the analyses and may introduce inconsistencies. The method has been successfully applied to Planck simulations Leach et al., 2008 <cite>#leach2008</cite> and to WMAP polarisation data Fernandez-Cobos et al., 2012 <cite>xx</cite>. In the cleaning process, no assumptions about the foregrounds or noise levels are needed, rendering the technique very robust.
+
====SEVEM====
  
 +
The aim of SEVEM is to produce clean CMB maps at one or several frequencies by using a procedure based on template fitting. The templates are internal, i.e., they are constructed from Planck data, avoiding the need for external data sets, which usually complicates the analyses and may introduce inconsistencies. The method has been successfully applied to Planck simulations{{BibCite|leach2008}} and to WMAP polarisation data{{BibCite|fernandezcobos2012}}. In the cleaning process, no assumptions about the foregrounds or noise levels are needed, rendering the technique very robust.  Note that unlike the other products, SEVEM does not provide the mask of regions not used in the productions of the CMB ma (''I_MASK'') nor an inpainted version of the map and its associated mask.  On the other hand, it provides ''channel maps'' and 100, 143, and 217 GHz which are used as the building blocks of the final map.
  
===Production process===
+
====COMMANDER-Ruler====
  
; SMICA
+
COMMANDER-Ruler is the Planck software implementing a pixel based parametric component separation. Amplitude of CMB and the main diffuse foregrounds along with the relevant spectral parameters for those (see below in the Astrophysical Foreground Section for the latter) are parametrized and fitted in single MCMC chains conducted at $N_\rm{side}$=256 using COMMANDER, implementing a Gibbs Sampling. The CMB amplitude which
 +
is obtained in these runs corresponds to the delivered low resolution CMB component from COMMANDER-Ruler which has a FWHM of 40 arcminutes. The sampling of the foreground parameters is applied to the data at full resolution for obtaining the high resolution CMB component from Ruler which is available on the PLA. In the {{PlanckPapers|planck2013-p06|1|Planck Component Separation paper}} additional material is discussed, specifically concerning the sky region where the solutions are reliable, in terms of chi2 maps. The products mainly consist of:
  
Some implementation details about the SMICA products.
+
* Maps of the Amplitudes of the CMB at low resolution, $N_\rm{side}$=256, along with the standard deviations of the outputs, beam profiles derived from the production process.
 +
* Maps of the CMB amplitude, along with the standard deviations, at high resolution, $N_\rm{side}$=2048, beam profiles derived from the production process.
 +
* Mask obtained on the basis of the precision in the fitting procedure; the thresholding is evaluated through the COMMANDER-Ruler likelihood analysis and excludes 13% of the sky, see {{PlanckPapers|planck2013-p06}}.
  
All nine Planck frequency channels from 30 to 857 GHz, harmonically transformed up to  <math>\ell = 4000 </math>.
+
===Production process===
  
 +
====SMICA====
  
Before applying the SMICA weights in the harmonic domain, the input
+
; 1) Pre-processing
maps undergo a pre-processing step to deal with point sources.  The
+
: All input maps undergo a pre-processing step to deal with point sources.  The point sources with SNR > 5 in the PCCS catalogue are fitted in each input map. If the fit is successful, the fitted point source is removed from the map; otherwise it is masked and the hole is filled in by a simple diffusive process to ensure a smooth transition and mitigate spectral leakage. This is done at all frequencies but 545 and 857 GHz, here all point sources with SNR > 7.5 are masked and filled-in similarly.
point sources with SNR > 5 in the PCCS catalogue are fitted in each
+
; 2) Linear combination
input map. If the fit is successful, the fitted point source is
+
: The nine pre-processed Planck frequency channels from 30 to 857 GHzare harmonically transformed up to <math>\ell = 4000</math> and co-added with multipole-dependent weights as shown in the figure.
removed from the map; otherwise it is masked and the hole is
+
; 3) Post-processing
in-painted by a simple diffusive process to ensure a smooth transition
+
: The areas masked in the pre-processing step are replaced by a constrained Gaussian realization.
and mitigate spectral leakage. This is done at all frequencies but 545
 
and 857 GHz, where all point sources with SNR > 7.5 are masked and
 
in-painted.
 
  
Viewed as a filter, SMICA can be summarized by the weights
+
Note: The visible power deficit in the raw CMB map around the galactic plane is due to the smooth fill-in of the masked areas in the input maps (the result of the pre-processing). It is not to be confused with the post-processing step of inpainting of the CMB map with a constrained Gaussian realization.
<math>\mathbf{w}_\ell</math> applied to each input map as a function
 
of multipole. In this sense, SMICA is strictly equivalent to co-adding
 
the input maps after convolution by specific axi-symmetric kernels
 
directly related to the corresponding entry of
 
<math>\mathbf{w}_\ell</math>. The SMICA weights used here are shown in
 
the figure below for input maps in units of
 
K<math>_\rm{RJ}</math>. They show, in particular, the (expected)
 
progressive attenuation of the lowest resolution channels with
 
increasing multipole.
 
  
[[File:smica.jpg|thumb|center|600px|'''Weights <math>w_\ell</math> given by SMICA to the input maps, after they are re-beamed to 5 arcmin and expressed in K<math>_\rm{RJ}</math>), as a function of multipole.''']]
 
  
 +
[[File:smica.jpg|thumb|center|500px|'''Weights given by SMICA to the input maps (after they are re-beamed to 5 arcmin and expressed in K<math>_\rm{RJ}</math>), as a function of multipole.''']]
  
; NILC
+
====NILC====
  
The NILC method combines linearly input maps varying over the sky and
+
; 1) Pre-processing
over multipoles.  In the needlet framework, harmonic localisation is
+
: Same pre-processing as SMICA (except the 30 GHz channel is not used).
achieved using a set of bandpass filters defining ‘scales’ and spatial
+
; 2) Linear combination
localization is achieved, at each scale, by defining zones over the
+
: The pre-processed Planck frequency channels from 44 to 857 GHz are linearly combined with weights which depend on location on the sky and on the multipole range up to <math>\ell = 3200</math>.  This is achieved using a needlet (redundant spherical wavelet) decomposition. For more details, see {{PlanckPapers|planck2013-p06}}.
sky. The harmonic localisation used here uses 9 spectral bands
+
; 3) Post-processing
covering multipoles up to <math>\ell</math> = 3200 (see figure
+
: The areas masked in the pre-processing plus other bright regions step are replaced by a constrained Gaussian realization as in the SMICA post-processing step.
below). The spatial localisation depends on the scale: at the coarsest
 
scale, which include the multipoles of lowest degree, we use a single
 
zone (no localization) while at the finest scales (which include the
 
highest degree multipoles), the sky is partitioned in up to 20 zones
 
(again, see figure below).
 
  
<center>
+
====SEVEM====
<gallery perrow=2 widths=300px heights=180px>
 
File:Nilc1.jpg | Spectral window functions defining nine ''needlet scales''
 
File:Nilc2.jpg | The 2-zone partition for scale 2.
 
File:Nilc3.jpg | The 4-zone partition for scale 3.
 
File:Nilc4.jpg | The 20-zone partition for scales 5 to 9.
 
</gallery>
 
</center>
 
  
The actual processing differs from the above scenario in several respects: pre-processing of point sources, dealing with frequency-dependent beams, and dealing with statistical issues (the ILC bias) in the coarsest scale.
+
The templates are internal, i.e., they are constructed from Planck data, avoiding the need for external data sets, which usually complicates the analyses and may introduce inconsistencies. In the cleaning process, no assumptions about the foregrounds or noise levels are needed, rendering the technique very robust. The fitting can be done in real or wavelet space (using a fast wavelet adapted to the HEALPix pixelization{{BibCite|casaponsa2011}}) to properly deal with incomplete sky coverage. By expediency, however, we fill in the small number of unobserved pixels at each channel with the mean value of its neighbouring pixels before applying SEVEM.
* ''Pre-processing of point sources''. Identical to the SMICA pre-processing.
 
* ''Masking and inpainting''. The NILC CMB map is actually produced in a two step process. In a first step, the NILC weights are computed from needlet statistics evaluated using a Galactic mask which covers about 98% of the sky (and is apodiwed at 1 degree). In a second step, those NILC weights on are applied to needlet coefficients computed over the whole sky (the point sources having been subtracted or fitted at the pre-processing stage), yielding a NILC CMB estimate over the whole sky, except for the point source mask.
 
* ''ILC bias and spectral statistics for the coarsest scale''. The coarsest scale of the NILC filter is not localized. Therefore, the NILC map at the coarsest scale is equivalent to a plain pixel-based ILC which is known to be quite susceptible to an ‘ILC bias’ due to chance correlations between the CMB and foregrounds. In order to mitigate that effect, the covariance matrix which determines the ILC coefficients at the coarsest scale is not computed as a pixel average but is rather estimated in the spectral domain with a spectral weight which equalizes the power of the CMB modes (based on a fiducial spectrum).
 
* ''Using SMICA recalibration''. In our current rendering, the NILC uses for the CMB emission law the values determined by SMICA.
 
 
 
For more details, see <cite>#planck2013-p06</cite>.
 
 
 
; SEVEM
 
 
 
The templates are internal, i.e., they are constructed from Planck data, avoiding the need for external data sets, which usually complicates the analyses and may introduce inconsistencies. In the cleaning process, no assumptions about the foregrounds or noise levels are needed, rendering the technique very robust. The fitting can be done in real or wavelet space (using a fast wavelet adapted to the HEALPix pixelization; Casaponsa et al. 2011 <cite>#Casaponsa2011</cite>) to properly deal with incomplete sky coverage. By expediency, however, we fill in the small number of unobserved pixels at each channel with the mean value of its neighbouring pixels before applying SEVEM.
 
 
 
We construct our templates by subtracting two close Planck frequency channel maps, after first smoothing them to a common resolution to ensure that the CMB signal is properly removed. A linear combination of the templates <math>t_j</math> is then subtracted from (hitherto unused) map d to produce a clean CMB map at that frequency. This is done either in real or in wavelet space (i.e., scale by scale) at each position on the sky:
 
 
 
:<math> \label{eq:eq4}
 
T_c(\mathbf{x}, ν) = d(\mathbf{x}, ν) − \sum_{j=1}^{n_t} α_j t(\mathbf{x})
 
</math>
 
  
 +
We construct our templates by subtracting two close Planck frequency channel maps, after first smoothing them to a common resolution to ensure that the CMB signal is properly removed. A linear combination of the templates <math>t_j</math> is then subtracted from (hitherto unused) map d to produce a clean CMB map at that frequency. This is done either in real or in wavelet space (i.e., scale by scale) at each position on the sky: <math> T_c(\mathbf{x}, ν) = d(\mathbf{x}, ν) − \sum_{j=1}^{n_t} α_j t(\mathbf{x}) </math>
 
where <math>n_t</math> is the number of templates. If the cleaning is performed in real space, the <math>α_j</math> coefficients are obtained by minimising the variance of the clean map <math>T_c</math> outside a given mask. When working in wavelet space, the cleaning is done in the same way at each wavelet scale independently (i.e., the linear coefficients depend on the scale). Although we exclude very contaminated regions during the minimization, the subtraction is performed for all pixels and, therefore, the cleaned maps cover the full-sky (although we expect that foreground residuals are present in the excluded areas).
 
where <math>n_t</math> is the number of templates. If the cleaning is performed in real space, the <math>α_j</math> coefficients are obtained by minimising the variance of the clean map <math>T_c</math> outside a given mask. When working in wavelet space, the cleaning is done in the same way at each wavelet scale independently (i.e., the linear coefficients depend on the scale). Although we exclude very contaminated regions during the minimization, the subtraction is performed for all pixels and, therefore, the cleaned maps cover the full-sky (although we expect that foreground residuals are present in the excluded areas).
  
Line 152: Line 173:
 
Our final CMB map has then been constructed by combining the 143 and 217 GHz maps by weighting the maps in harmonic space taking into account the noise level, the resolution and a rough estimation of the foreground residuals of each map (obtained from realistic simulations). This final map has a resolution corresponding to a Gaussian beam of fwhm=5 arcminutes.
 
Our final CMB map has then been constructed by combining the 143 and 217 GHz maps by weighting the maps in harmonic space taking into account the noise level, the resolution and a rough estimation of the foreground residuals of each map (obtained from realistic simulations). This final map has a resolution corresponding to a Gaussian beam of fwhm=5 arcminutes.
  
Moreover, additional CMB clean maps (at frequencies between 44 and 353 GHz) have also been produced using different combinations of templates for some of the analyses carried out in <cite>#planck2013-p09</cite> {{P2013|23}} and <cite>#planck2013-p14</cite> {{P2013|19}}. In particular, clean maps from 44 to 353 GHz have been used for the stacking analysis presented in <cite>#planck2013-p14</cite>, while frequencies from 70 to 217 GHz were used for consistency tests in <cite>#planck2013-p09</cite>.
+
Moreover, additional CMB clean maps (at frequencies between 44 and 353 GHz) have also been produced using different combinations of templates for some of the analyses carried out in {{PlanckPapers|planck2013-p09}} and {{PlanckPapers|planck2013-p14}}. In particular, clean maps from 44 to 353 GHz have been used for the stacking analysis presented in {{PlanckPapers|planck2013-p14}}, while frequencies from 70 to 217 GHz were used for consistency tests in {{PlanckPapers|planck2013-p09}}.
  
The method has been successfully applied to Planck simulations <cite>#leach2008</cite> and to WMAP polarisation data <cite>#Fernandez-Cobos2012</cite>.
+
====COMMANDER-Ruler====
  
===Inputs===
+
The production process consist in low and high resolution runs according to the description above.
 +
; Low Resolution Runs: Same as the Astrophysics Foregrounds Section below; The CMB amplitude is fitted along with the other foreground parameters and constitutes the CMB Low Resolution Rendering which is in the PLA.
 +
; Ruler Runs: the sampling at high resolution is used to infer the probability distribution of spectral parameters which is exploited at full resolution in order to obtain the High Resolution CMB Rendering which is in the PLA.
  
The input maps are the sky temperature maps described in the [[Frequency Maps | Sky temperature maps]] section.
+
==== Masks ====
  
; SMICA
+
Summary table with the different masks that have been used by the component separation methods to pre-process and to process the frequency maps and the CMB maps.
  
SMICA uses all nine Planck frequency channels from 30 to 857 GHz. SMICA uses a pre-processing step in which point sources are subtracted or masked as described above.
+
{| border="1" cellpadding="5" cellspacing="0" align="center" style="text-align:center"
 +
|-
 +
|- bgcolor="ffdead" 
 +
! Commander 2013 (PR1) || Used for diffuse inpainting of input frequency maps || Used for constrained Gaussian realization inpaiting of CMB map  || Description
 +
|-
 +
|VALMASK || NO || NO || VALMASK is the confidence mask that defines the region where the reconstructed CMB is trusted. It can be found inside
  
; NILC
+
{{PLASingleFile|fileType=map|name=COM_CompMap_CMB-commrul_2048_R1.00.fits|link=COM_CompMap_CMB-commrul_2048_R1.00.fits}} and {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-commrul_0256_R1.00.fits|link=COM_CompMap_CMB-commrul_0256_R1.00.fits}} for low resolution analyses.
 +
|-
 +
|- bgcolor="800000"
 +
|
 +
! ||
 +
|
 +
|- bgcolor="ffdead" 
 +
! SEVEM 2013 (PR1) || Used diffuse inpainting of input frequency maps || Used for Constrained Gaussian realization inpaiting of CMB map || Description
 +
|-
 +
|VALMASK || NO || NO || VALMASK is the confidence mask that defines the region where the reconstructed CMB is trusted. It can be found inside
  
NILC uses eight frequency channels from 44 to 857 GHz and the same pre-processing step as SMICA.
+
{{PLASingleFile|fileType=map|name=COM_CompMap_CMB-sevem_2048_R1.12.fits|link=COM_CompMap_CMB-sevem_2048_R1.12.fits}}.
 +
|-
 +
|- bgcolor="800000"
 +
|
 +
! ||
 +
|
 +
|- bgcolor="ffdead"
 +
! NILC 2013 (PR1) || Used for diffuse inpainting of input frequency maps || Used for constrained Gaussian realization inpaiting of CMB map || Description
 +
|-
 +
|VALMASK || NO || NO || VALMASK is the confidence mask that defines the region where the reconstructed CMB is trusted. It can be found inside {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-nilc_2048_R1.20.fits|link=COM_CompMap_CMB-nilc_2048_R1.20.fits}}.
 +
|-
 +
|I_MASK || NO || NO || I_MASK defines the regions over which CMB is not built. It is a combination of point source masks, Galactic plane mask and other bright regions like LMC, SMC, etc. It can be found inside {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-nilc_2048_R1.20.fits|link=COM_CompMap_CMB-nilc_2048_R1.20.fits}}.
 +
|- 
 +
|INP_MASK || NO || YES || It can be found inside {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-nilc_2048_R1.20.fits|link=COM_CompMap_CMB-nilc_2048_R1.20.fits}}.
 +
|-
 +
|-
 +
|- bgcolor="800000"
 +
|
 +
! ||
 +
|
 +
|- bgcolor="ffdead" 
 +
! SMICA 2013 (PR1) || Used for diffuse inpainting of input frequency maps || Used for constrained Gaussian realization inpaiting of CMB map  || Description
 +
|-
 +
|VALMASK || NO || NO || VALMASK is the confidence mask that defines the region where the reconstructed CMB is trusted. It can be found inside
  
; SEVEM
+
{{PLASingleFile|fileType=map|name=COM_CompMap_CMB-smica_2048_R1.20.fits|link=COM_CompMap_CMB-smica_2048_R1.20.fits}}.
 +
|-
 +
|I_MASK || YES || YES || I_MASK defines the regions over which CMB is not built. It is a combination of point source masks, Galactic plane mask and other bright regions like LMC, SMC, etc. It can be found inside {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-smica_2048_R1.20.fits|link=COM_CompMap_CMB-smica_2048_R1.20.fits}}.
 +
|- 
 +
|INP_MASK || YES || YES || INP_MASK for SMICA 2013 release is identical to I_MASK above. 
 +
|-
 +
|-
 +
|}
  
SEVEM uses all nine Planck frequency channel maps. The 30 - 70 GHz and 353 - 857 GHz maps are used to construct templates by taking the differences (30 - 44) GHz, (44 - 70) GHz, (545 - 353) GHz and (857 - 545) GHz, after smoothing to a common resolution. The 100, 143 and 217 GHz maps are cleaned using the templates.
 
  
 +
===Inputs===
 +
 +
The input maps are the sky temperature maps described in the [[Frequency Maps | Sky temperature maps]] section. SMICA and SEVEM use all the maps between 30 and 857 GHz; NILC uses the ones between 44 and 857 GHz. Commander-Ruler uses frequency channel maps from 30 to 353 GHz.
  
 
===File names and structure===
 
===File names and structure===
Line 177: Line 246:
 
The FITS files corresponding to the three CMB products are the following:
 
The FITS files corresponding to the three CMB products are the following:
  
* {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-nilc_2048_R1.11.fits|link=COM_CompMap_CMB-nilc_2048_R1.11.fits}}
+
* {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-nilc_2048_R1.20.fits|link=COM_CompMap_CMB-nilc_2048_R1.20.fits}}
* {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-sevem_2048_R1.11.fits|link=COM_CompMap_CMB-sevem_2048_R1.11.fits}}
+
* {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-sevem_2048_R1.12.fits|link=COM_CompMap_CMB-sevem_2048_R1.12.fits}}
* {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-smica_2048_R1.11.fits|link=COM_CompMap_CMB-smica_2048_R1.11.fits}}
+
* {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-smica_2048_R1.20.fits|link=COM_CompMap_CMB-smica_2048_R1.20.fits}}
 +
* {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-commrul_2048_R1.00.fits|link=COM_CompMap_CMB-commrul_2048_R1.00.fits}}
 +
* {{PLASingleFile|fileType=map|name=COM_CompMap_CMB-commrul_0256_R1.00.fits|link=COM_CompMap_CMB-commrul_0256_R1.00.fits}}
  
and the CMB they contain is shows below.
 
  
<center>
+
The files contain a minimal primary extension with no data and four ''BINTABLE'' data extensions. Each column of the ''BINTABLE'' is a (Healpix) map; the column names and the most important keywords of each extension are described in the table below; for the remaining keywords, please see the FITS files directly.  
<gallery perrow=3 widths=260px heights=170px>
 
File: CMB-smica.png | SMICA
 
File: CMB-nilc.png | NILC
 
File: CMB-sevem.png | SEVEM
 
</gallery></center>
 
  
 
The files contains a minimal primary extension with no data and four data extensions which are described in the table below:
 
  
 
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
Line 200: Line 263:
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
|I         || Real*4 || uK_cmb || The CMB temperature map
+
|I     || Real*4 || uK_cmb || CMB temperature map
 
|-
 
|-
|NOISE  || Real*4 || uK_cmb || Estimated noise map (Note 1)
+
|NOISE  || Real*4 || uK_cmb || Estimated noise map (note 1)
 
|-
 
|-
|VALMASK|| Byte || none || Validity, or confidence mask (note 2)
+
|I_STDEV|| Real*4 || uK_cmb || Standard deviation, ONLY on COMMANDER-Ruler products
 
|-
 
|-
|INPMASK || Byte || none || Inpainted mask (Optional - see Note 3)  
+
|VALMASK|| Byte || none || Confidence mask (note 2)
 +
|-
 +
|I_MASK|| Byte || none || Mask of regions over which CMB map is not built (Optional - see note 3)
 +
|-
 +
|INP_CMB || Real*4 || uK_cmb ||  Inpainted CMB temperature map (Optional - see note 3)
 +
|-
 +
|INP_MASK || Byte || none ||  mask of inpainted pixels (Optional - see note 3)
 
|-
 
|-
 
|- bgcolor="ffdead"   
 
|- bgcolor="ffdead"   
Line 221: Line 290:
 
|NSIDE  ||  Int || 2048 || Healpix Nside
 
|NSIDE  ||  Int || 2048 || Healpix Nside
 
|-
 
|-
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM)
+
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
 
|-
 
|-
 
|- bgcolor="ffdead"   
 
|- bgcolor="ffdead"   
Line 275: Line 344:
 
|NSIDE  ||  Int || 2048 || Healpix Nside
 
|NSIDE  ||  Int || 2048 || Healpix Nside
 
|-
 
|-
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM)
+
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
 
|- bgcolor="ffdead"   
 
|- bgcolor="ffdead"   
 
!colspan="4" | Ext. 4. EXTNAME = ''BEAM_WF'' (BINTABLE)
 
!colspan="4" | Ext. 4. EXTNAME = ''BEAM_WF'' (BINTABLE)
Line 281: Line 350:
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
|BEAM_WF          || Real*4 || uK_cmb || The CMB temperature map
+
|BEAM_WF          || Real*4 || none || The effective beam window function, including the pixel window function.  See Note 5.
 
|-
 
|-
 
|- bgcolor="ffdead"   
 
|- bgcolor="ffdead"   
Line 290: Line 359:
 
|LMAX ||  Int || value || Lsst multipole of beam WF
 
|LMAX ||  Int || value || Lsst multipole of beam WF
 
|-
 
|-
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM)
+
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
 
|-
 
|-
 
|}
 
|}
 
  
 
Notes:
 
Notes:
 
# The half-ring half-difference (HRHD) map is made by passing the half-ring frequency maps independently through the component separation pipeline, then computing half their difference. It approximates a noise realisation, and gives an indication of the uncertainties due to instrumental noise in the corresponding CMB map.  
 
# The half-ring half-difference (HRHD) map is made by passing the half-ring frequency maps independently through the component separation pipeline, then computing half their difference. It approximates a noise realisation, and gives an indication of the uncertainties due to instrumental noise in the corresponding CMB map.  
 
# The confidence mask indicates where the CMB map is considered valid.  
 
# The confidence mask indicates where the CMB map is considered valid.  
# NILC and SMICA CMB maps have been inpainted in the Galactic plane and around some bright sources with a constrained realisation of the signal. The inpainted area covers approximately 3% of the sky. This column is not present in the SEVEM product file.
+
# This column is not present in the SEVEM and COMMANDER-Ruler product file.  For SEVEM these three columns give the CMB channel maps at 100, 143, and 217 GHz (columns ''C100'', ''C143'', and ''C217'', in units of K_cmb.
# The subtraction of the CMB from the sky maps in order to produce the foregrounds map is done after convolving the CMB map to the resolution of the given frequency.
+
# The subtraction of the CMB from the sky maps in order to produce the foregrounds map is done after convolving the CMB map to the resolution of the given frequency. Those columns are not present in the COMMANDER-Ruler product file.
 +
# The beam window function <math>B_\ell</math> given here includes the  pixel window function <math>p_\ell</math> for the Nside=2048  pixelization.  It means that, ideally, <math>C_\ell(map) = C_\ell(sky) \, B_\ell^2 \, p_\ell^2</math>.
 +
 
 +
The low resolution COMMANDER-Ruler CMB product is organized in the following way:
 +
{| border="1" cellpadding="3" cellspacing="0" align="center" style="text-align:left" width=800px
 +
|+ '''CMB low resolution COMMANDER-Ruler map file data structure'''
 +
|- bgcolor="ffdead" 
 +
! colspan="4" | Ext. 1. EXTNAME = ''COMP-MAP'' (BINTABLE)
 +
|- bgcolor="ffdead" 
 +
! Column Name || Data Type || Units || Description
 +
|-
 +
|I    || Real*4 || uK_cmb || CMB temperature map obtained as average over 1000 samples
 +
|-
 +
|I_stdev  || Real*4 || uK_cmb || Corresponding Standard deviation amongst the 1000 samples
 +
|-
 +
|VALMASK|| Byte || none || Confidence mask
 +
|-
 +
|- bgcolor="ffdead" 
 +
! Keyword || Data Type || Value || Description
 +
|-
 +
|PIXTYPE ||  String || HEALPIX ||
 +
|-
 +
|COORDSYS ||  String || GALACTIC ||Coordinate system
 +
|-
 +
|ORDERING || String || NESTED  || Healpix ordering
 +
|-
 +
|NSIDE  ||  Int || 2048 || Healpix Nside
 +
|-
 +
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
 +
|-
 +
|- bgcolor="ffdead" 
 +
!colspan="4" | Ext. 2. EXTNAME = ''CMB-Sample'' (BINTABLE)
 +
|- bgcolor="ffdead" 
 +
! Column Name || Data Type || Units || Description
 +
|-
 +
|I_SIM01  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM02  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM03  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM04  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM05  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM06  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM07  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM08  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM09  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|I_SIM10  || Real*4 || K_cmb || CMB Sample, smoothed to 40 arcmin
 +
|-
 +
|- bgcolor="ffdead" 
 +
! Keyword || Data Type || Value || Description
 +
|-
 +
|PIXTYPE ||  String || HEALPIX ||
 +
|-
 +
|COORDSYS ||  String || GALACTIC ||Coordinate system
 +
|-
 +
|ORDERING || String || NESTED  || Healpix ordering
 +
|-
 +
|NSIDE  ||  Int || 1024 || Healpix Nside
 +
|-
 +
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
 +
|- bgcolor="ffdead" 
 +
!colspan="4" | Ext. 4. EXTNAME = ''BEAM_WF'' (BINTABLE)
 +
|- bgcolor="ffdead" 
 +
! Column Name || Data Type || Units || Description
 +
|-
 +
|BEAM_WF          || Real*4 || none || The effective beam window function, including the pixel window function.
 +
|-
 +
|- bgcolor="ffdead" 
 +
! Keyword || Data Type || Value || Description
 +
|-
 +
|LMIN ||  Int || value || First multipole of beam WF
 +
|-
 +
|LMAX ||  Int || value || Lsst multipole of beam WF
 +
|-
 +
|METHOD  || String ||name || Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
 +
|-
 +
|}
 +
 
 +
 
 +
The FITS files containing the ''union'' (or common) maks is:
 +
* {{PLASingleFile|fileType=map|name=COM_Mask_CMB-union_2048_R1.10.fits|link=COM_Mask_CMB-common}}
 +
which contains a single ''BINTABLE'' extension with a single column (named ''U73'') for the mask, which is boolean (FITS ''TFORM = B''), in GALACTIC coordinates, NESTED ordering, and Nside=2048.
 +
 
 +
For the benefit of users who are only looking for a small file containing the SMICA cmb map with no additional information (noise or masks) we provide such a file here
 +
*{{PLASingleFile|fileType=map|name=COM_CompMap_CMB-smica-field-I_2048_R1.20.fits|link=COM_CompMap_CMB-smica-field-I_2048_R1.20.fits}}
 +
This file contains a single extension with a single column containing the SMICA cmb temperature map.
  
 
===Cautionary notes===
 
===Cautionary notes===
Line 309: Line 469:
 
== Astrophysical foregrounds from parametric component separation ==
 
== Astrophysical foregrounds from parametric component separation ==
  
We describe diffuse foreground products for the Planck 2013 release. See Planck Component Separation paper <cite>#planck2013-p06</cite> {{P2013|12}} for a detailed description and astrophysical discussion of those.
+
 
 +
We describe diffuse foreground products for the Planck 2013 release. See Planck Component Separation paper {{PlanckPapers|planck2013-p06}} for a detailed description and astrophysical discussion of those.
  
 
===Product description===
 
===Product description===
Line 327: Line 488:
 
frequency channels is reduced to N$_\rm{side}$=256 first. Parameters related to the foreground scaling with frequency are estimated at that resolution  
 
frequency channels is reduced to N$_\rm{side}$=256 first. Parameters related to the foreground scaling with frequency are estimated at that resolution  
 
by using Markov Chain Monte Carlo analysis using Gibbs sampling. The foreground parameters make the foreground mixing matrix which is  
 
by using Markov Chain Monte Carlo analysis using Gibbs sampling. The foreground parameters make the foreground mixing matrix which is  
applied to the data at full resolution in order to obtain the provided products at N$_\rm{side}$=2048. In the Planck Component Separation paper <cite>#planck2013-p06</cite> {{p2013|12}}additional material is discussed, specifically concerning the sky region where the solutions are reliable, in terms of chi2 maps.
+
applied to the data at full resolution in order to obtain the provided products at N$_\rm{side}$=2048. In the Planck Component Separation paper {{PlanckPapers|planck2013-p06}} additional material is discussed, specifically concerning the sky region where the solutions are reliable, in terms of chi2 maps.
  
 
===Inputs===
 
===Inputs===
Line 340: Line 501:
 
===File names===
 
===File names===
  
* Low frequency component at N$_\rm{side}$ 256:
+
* Low frequency component at N$_\rm{side}$ 256: {{PLASingleFile|fileType=map|name=COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits|link=COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits}}
: {{PLASingleFile|fileType=map|name=COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits|link=COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits}}
+
* Low frequency component at N$_\rm{side}$ 2048: {{PLASingleFile|fileType=map|name=COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits|link=COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits}}
* Low frequency component at N$_\rm{side}$ 2048:
+
* Thermal dust at N$_\rm{side}$ 256: {{PLASingleFile|fileType=map|name=COM_CompMap_dust-commrul_0256_R1.00.fits|link=COM_CompMap_dust-commrul_0256_R1.00.fits}}
: {{PLASingleFile|fileType=map|name=COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits|link=COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits}}
+
* Thermal dust at N$_\rm{side}$ 2048: {{PLASingleFile|fileType=map|name=COM_CompMap_dust-commrul_2048_R1.00.fits|link=COM_CompMap_dust-commrul_2048_R1.00.fits}}
* Thermal dust at N$_\rm{side}$ 256:
+
* Mask: {{PLASingleFile|fileType=map|name=COM_CompMap_Mask-rulerminimal_2048_R1.00.fits|link=COM_CompMap_Mask-rulerminimal_2048_R1.00.fits}}
: {{PLASingleFile|fileType=map|name=COM_CompMap_dust-commrul_0256_R1.00.fits|link=COM_CompMap_dust-commrul_0256_R1.00.fits}}
 
* Thermal dust at N$_\rm{side}$ 2048:  
 
: {{PLASingleFile|fileType=map|name=COM_CompMap_dust-commrul_2048_R1.00.fits|link=COM_CompMap_dust-commrul_2048_R1.00.fits}}
 
 
 
* Mask:
 
: {{PLASingleFile|fileType=map|name=COM_CompMap_Mask-rulerminimal_2048_R1.00.fits|link=COM_CompMap_Mask-rulerminimal_2048_R1.00.fits}}
 
  
 
===Meta Data===
 
===Meta Data===
Line 356: Line 511:
 
====Low frequency foreground component====
 
====Low frequency foreground component====
  
=====Low frequency component at N$_\rm{side}$ 256=====
+
=====Low frequency component at N$_\rm{side}$ = 256=====
  
 
File name: COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits
 
File name: COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits
Line 365: Line 520:
 
|+ FITS header
 
|+ FITS header
 
|-
 
|-
 +
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
Line 380: Line 536:
 
: Comment: The intensity was estimated during mixing matrix estimation
 
: Comment: The intensity was estimated during mixing matrix estimation
  
Below an example of the header.
+
=====Low frequency component at N$_\rm{side}$ = 2048=====
<!--pre>
 
XTENSION= 'BINTABLE'          / binary table extension
 
BITPIX  =                    8 / 8-bit bytes
 
NAXIS  =                    2 / 2-dimensional binary table
 
NAXIS1  =                  16 / width of table in bytes
 
NAXIS2  =              786432 / number of rows in table
 
PCOUNT  =                    0 / size of special data area
 
GCOUNT  =                    1 / one data group (required keyword)
 
TFIELDS =                    4 / number of fields in each row
 
TTYPE1  = 'I      '          / label for field  1
 
TFORM1  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT1  = 'uK_CMB  '          / physical unit of field
 
TTYPE2  = 'I_stdev '          / label for field  2
 
TFORM2  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT2  = 'uK_CMB  '          / physical unit of field
 
TTYPE3  = 'Beta    '          / label for field  3
 
TFORM3  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT3  = 'none    '          / physical unit of field
 
TTYPE4  = 'B_stdev '          / label for field  4
 
TFORM4  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT4  = 'none    '          / physical unit of field
 
EXTNAME = 'COMP-MAP'
 
DATE    = '2013-02-13T13:26:14' / file creation date (YYYY-MM-DDThh:mm:ss UT)
 
CHECKSUM= 'QXaaRVZTQVaZQVYZ'  / HDU checksum updated 2013-02-13T13:26:14
 
DATASUM = '2752450756'        / data unit checksum updated 2013-02-13T13:26:14
 
COMMENT
 
COMMENT *** Planck params ***
 
COMMENT
 
PIXTYPE = 'HEALPIX '          / HEALPIX pixelisation
 
ORDERING= 'NESTED  '          / Pixel ordering scheme, either RING or NESTED
 
NSIDE  =                  256 / Resolution parameter for HEALPIX
 
FIRSTPIX=                    0 / First pixel # (0 based)
 
LASTPIX =              786431 / Last pixel # (0 based)
 
INDXSCHM= 'IMPLICIT'          / Indexing: IMPLICIT or EXPLICIT
 
COORDSYS= 'GALACTIC'
 
FILENAME= 'COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits'
 
COMMENT ---------------------------------------------------------------------
 
COMMENT The intensity is normalized at 30GHz
 
COMMENT The intensity was estimated during mixing matrix estimation
 
COMMENT Object:
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_synch_amp_mean.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_synch_amp_stddev.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_synch_beta_mean.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_synch_beta_stddev.fits
 
COMMENT ---------------------------------------------------------------------
 
END
 
</pre -->
 
 
 
=====Low frequency component at N$_\rm{side}$ 2048=====
 
  
 
: File name: COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits
 
: File name: COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits
Line 444: Line 547:
 
|+ FITS header
 
|+ FITS header
 
|-
 
|-
 +
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
Line 465: Line 569:
 
|+ FITS header
 
|+ FITS header
 
|-
 
|-
 +
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
Line 472: Line 577:
 
; Notes:
 
; Notes:
 
: Comment: Beam window function used in the Component separation process
 
: Comment: Beam window function used in the Component separation process
 
Below an example of the header of the first and second extension respectively.
 
<!-- pre>
 
XTENSION= 'BINTABLE'          / binary table extension
 
BITPIX  =                    8 / 8-bit bytes
 
NAXIS  =                    2 / 2-dimensional binary table
 
NAXIS1  =                  32 / width of table in bytes
 
NAXIS2  =            50331648 / number of rows in table
 
PCOUNT  =                    0 / size of special data area
 
GCOUNT  =                    1 / one data group (required keyword)
 
TFIELDS =                    4 / number of fields in each row
 
TTYPE1  = 'I      '          / label for field  1
 
TFORM1  = 'D      '          / data format of field: 8-byte DOUBLE
 
TUNIT1  = 'uK_CMB  '          / physical unit of field
 
TTYPE2  = 'I_stdev '          / label for field  2
 
TFORM2  = 'D      '          / data format of field: 8-byte DOUBLE
 
TUNIT2  = 'uK_CMB  '          / physical unit of field
 
TTYPE3  = 'I_hr1  '          / label for field  3
 
TFORM3  = 'D      '          / data format of field: 8-byte DOUBLE
 
TUNIT3  = 'uK_CMB  '          / physical unit of field
 
TTYPE4  = 'I_hr2  '          / label for field  4
 
TFORM4  = 'D      '          / data format of field: 8-byte DOUBLE
 
TUNIT4  = 'uK_CMB  '          / physical unit of field
 
EXTNAME = 'COMP-MAP'
 
DATE    = '2013-02-15T17:12:04' / file creation date (YYYY-MM-DDThh:mm:ss UT)
 
CHECKSUM= 'dlA5ei24di94di94'  / HDU checksum updated 2013-02-15T17:12:13
 
DATASUM = '3117718572'        / data unit checksum updated 2013-02-15T17:12:13
 
COMMENT
 
COMMENT *** Planck params ***
 
COMMENT
 
PIXTYPE = 'HEALPIX '          / HEALPIX pixelisation
 
ORDERING= 'NESTED  '          / Pixel ordering scheme, either RING or NESTED
 
NSIDE  =                2048 / Resolution parameter for HEALPIX
 
FIRSTPIX=                    0 / First pixel # (0 based)
 
LASTPIX =            50331647 / Last pixel # (0 based)
 
INDXSCHM= 'IMPLICIT'          / Indexing: IMPLICIT or EXPLICIT
 
BAD_DATA=          -1.6375E+30
 
COORDSYS= 'GALACTIC'
 
FILENAME= 'COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits'
 
COMMENT ---------------------------------------------------------------------
 
COMMENT The intensity was computed after mixibg matrix application
 
COMMENT Objects used:
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9_delta_v1_7b_avrg_lowfreq.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/CR-temporary
 
COMMENT /dx9delta_stddev/dx9_delta_v1_7b_lowfreq_stddev.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9_delta_v1_7b_hr1_avrg_lowfreq.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9_delta_v1_7b_hr2_avrg_lowfreq.fits
 
COMMENT ---------------------------------------------------------------------
 
END
 
</pre>
 
 
<pre>
 
XTENSION= 'BINTABLE'          / binary table extension
 
BITPIX  =                    8 / 8-bit bytes
 
NAXIS  =                    2 / 2-dimensional binary table
 
NAXIS1  =                    4 / width of table in bytes
 
NAXIS2  =                1501 / number of rows in table
 
PCOUNT  =                    0 / size of special data area
 
GCOUNT  =                    1 / one data group (required keyword)
 
TFIELDS =                    1 / number of fields in each row
 
TTYPE1  = 'BeamWF  '          / label for field  1
 
TFORM1  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT1  = 'none    '          / physical unit of field
 
EXTNAME = 'BeamWF  '
 
DATE    = '2013-02-15T17:12:17' / file creation date (YYYY-MM-DDThh:mm:ss UT)
 
CHECKSUM= '74GA849274E97499'  / HDU checksum updated 2013-02-15T17:12:17
 
DATASUM = '3098248385'        / data unit checksum updated 2013-02-15T17:12:17
 
COMMENT
 
COMMENT *** Planck params ***
 
COMMENT
 
MAX-LPOL=                1500 / Maximum L multipole
 
POLAR  =                    T / Polarization included (True/False)
 
BCROSS  =                    T / Magnetic cross terms included (True/False)
 
COMMENT ---------------------------------------------------------------------
 
COMMENT The intensity was computed after mixing matrix application
 
COMMENT
 
COMMENT Objects used:
 
COMMENT
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/CR-temporary
 
COMMENT /dx9delta_beams/dx9_delta_v1_7b_lowfreq_beam.fits
 
COMMENT
 
COMMENT ---------------------------------------------------------------------
 
END
 
</pre -->
 
  
 
====Thermal dust====
 
====Thermal dust====
Line 572: Line 590:
 
|+ FITS header
 
|+ FITS header
 
|-
 
|-
 +
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
Line 589: Line 608:
 
; Notes:
 
; Notes:
 
: Comment: The intensity is normalized at 353 GHz
 
: Comment: The intensity is normalized at 353 GHz
 
Below an example of the header.
 
<!-- pre>
 
XTENSION= 'BINTABLE'          / binary table extension
 
BITPIX  =                    8 / 8-bit bytes
 
NAXIS  =                    2 / 2-dimensional binary table
 
NAXIS1  =                  24 / width of table in bytes
 
NAXIS2  =              786432 / number of rows in table
 
PCOUNT  =                    0 / size of special data area
 
GCOUNT  =                    1 / one data group (required keyword)
 
TFIELDS =                    6 / number of fields in each row
 
TTYPE1  = 'I      '          / label for field  1
 
TFORM1  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT1  = 'MJy/sr  '          / physical unit of field
 
TTYPE2  = 'I_stdev '          / label for field  2
 
TFORM2  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT2  = 'MJy/sr  '          / physical unit of field
 
TTYPE3  = 'Em      '          / label for field  3
 
TFORM3  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT3  = 'uK_CMB  '          / physical unit of field
 
TTYPE4  = 'Em_stdev'          / label for field  4
 
TFORM4  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT4  = 'none    '          / physical unit of field
 
TTYPE5  = 'T      '          / label for field  5
 
TFORM5  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT5  = 'uK_CMB  '          / physical unit of field
 
TTYPE6  = 'T_stdev '          / label for field  6
 
TFORM6  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT6  = 'uK_CMB  '          / physical unit of field
 
EXTNAME = 'COMP-MAP'
 
DATE    = '2013-02-13T13:31:15' / file creation date (YYYY-MM-DDThh:mm:ss UT)
 
CHECKSUM= '9OAOJO7N9OANGO7N'  / HDU checksum updated 2013-02-13T13:31:15
 
DATASUM = '4139938263'        / data unit checksum updated 2013-02-13T13:31:15
 
COMMENT
 
COMMENT *** Planck params ***
 
COMMENT
 
PIXTYPE = 'HEALPIX '          / HEALPIX pixelisation
 
ORDERING= 'NESTED  '          / Pixel ordering scheme, either RING or NESTED
 
NSIDE  =                  256 / Resolution parameter for HEALPIX
 
FIRSTPIX=                    0 / First pixel # (0 based)
 
LASTPIX =              786431 / Last pixel # (0 based)
 
INDXSCHM= 'IMPLICIT'          / Indexing: IMPLICIT or EXPLICIT
 
COORDSYS= 'GALACTIC'
 
FILENAME= 'COM_CompMap_dust-commrul_0256_R1.00.fits'
 
COMMENT ---------------------------------------------------------------------
 
COMMENT The intensity is normalized at 353 GHz
 
COMMENT Object:
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_dust_amp_mean.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_dust_amp_stddev.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_dust_em_mean.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_dust_em_stddev.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_dust_T_mean.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9delta_v1_dust_T_stddev.fits
 
COMMENT ---------------------------------------------------------------------
 
END
 
</pre -->
 
  
 
=====Thermal dust component at N$_\rm{side}$=2048=====
 
=====Thermal dust component at N$_\rm{side}$=2048=====
Line 663: Line 620:
 
|+ FITS header
 
|+ FITS header
 
|-
 
|-
 +
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
Line 681: Line 639:
 
|+ FITS header
 
|+ FITS header
 
|-
 
|-
 +
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
Line 688: Line 647:
 
; Notes:
 
; Notes:
 
: Comment: Beam window function used in the Component separation process
 
: Comment: Beam window function used in the Component separation process
 
Below an example of the header of the first and second extension respectively.
 
<!--  pre>
 
XTENSION= 'BINTABLE'          / binary table extension
 
BITPIX  =                    8 / 8-bit bytes
 
NAXIS  =                    2 / 2-dimensional binary table
 
NAXIS1  =                  32 / width of table in bytes
 
NAXIS2  =            50331648 / number of rows in table
 
PCOUNT  =                    0 / size of special data area
 
GCOUNT  =                    1 / one data group (required keyword)
 
TFIELDS =                    4 / number of fields in each row
 
TTYPE1  = 'I      '          / label for field  1
 
TFORM1  = 'D      '          / data format of field: 8-byte DOUBLE
 
TUNIT1  = 'MJy/sr  '          / physical unit of field
 
TTYPE2  = 'I_stdev '          / label for field  2
 
TFORM2  = 'D      '          / data format of field: 8-byte DOUBLE
 
TUNIT2  = 'MJy/sr  '          / physical unit of field
 
TTYPE3  = 'I_hr1  '          / label for field  3
 
TFORM3  = 'D      '          / data format of field: 8-byte DOUBLE
 
TUNIT3  = 'MJy/sr  '          / physical unit of field
 
TTYPE4  = 'I_hr2  '          / label for field  4
 
TFORM4  = 'D      '          / data format of field: 8-byte DOUBLE
 
TUNIT4  = 'MJy/sr  '          / physical unit of field
 
EXTNAME = 'COMP-MAP'
 
DATE    = '2013-02-16T10:23:15' / file creation date (YYYY-MM-DDThh:mm:ss UT)
 
CHECKSUM= '6k8A7i826i896i89'  / HDU checksum updated 2013-02-16T10:23:32
 
DATASUM = '3817117839'        / data unit checksum updated 2013-02-16T10:23:32
 
COMMENT
 
COMMENT *** Planck params ***
 
COMMENT
 
PIXTYPE = 'HEALPIX '          / HEALPIX pixelisation
 
ORDERING= 'NESTED  '          / Pixel ordering scheme, either RING or NESTED
 
NSIDE  =                2048 / Resolution parameter for HEALPIX
 
FIRSTPIX=                    0 / First pixel # (0 based)
 
LASTPIX =            50331647 / Last pixel # (0 based)
 
INDXSCHM= 'IMPLICIT'          / Indexing: IMPLICIT or EXPLICIT
 
BAD_DATA=          -1.6375E+30
 
COORDSYS= 'GALACTIC'
 
FILENAME= 'COM_CompMap_dust-commrul_2048_R1.00.fits'
 
COMMENT ---------------------------------------------------------------------
 
COMMENT Objects used:
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9_delta_v1_7b_avrg_dust_flux.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/CR-temporary
 
COMMENT /dx9delta_stddev/dx9_delta_v1_7b_dust_stddev.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9_delta_v1_7b_hr1_avrg_dust_flux.fits
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/commander-ru
 
COMMENT ler/delta_dx9/planck/dx9_delta_v1_7b_hr2_avrg_dust_flux.fits
 
COMMENT ---------------------------------------------------------------------
 
END
 
</pre>
 
 
<pre>
 
XTENSION= 'BINTABLE'          / binary table extension
 
BITPIX  =                    8 / 8-bit bytes
 
NAXIS  =                    2 / 2-dimensional binary table
 
NAXIS1  =                    4 / width of table in bytes
 
NAXIS2  =                3001 / number of rows in table
 
PCOUNT  =                    0 / size of special data area
 
GCOUNT  =                    1 / one data group (required keyword)
 
TFIELDS =                    1 / number of fields in each row
 
TTYPE1  = 'BeamWF  '          / label for field  1
 
TFORM1  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT1  = 'none    '          / physical unit of field
 
EXTNAME = 'BeamWF  '
 
DATE    = '2013-02-16T10:23:34' / file creation date (YYYY-MM-DDThh:mm:ss UT)
 
CHECKSUM= 'FBGWI9EWFAEWF7EW'  / HDU checksum updated 2013-02-16T10:23:34
 
DATASUM = '4096860189'        / data unit checksum updated 2013-02-16T10:23:34
 
COMMENT
 
COMMENT *** Planck params ***
 
COMMENT
 
MAX-LPOL=                3000 / Maximum L multipole
 
COMMENT ---------------------------------------------------------------------
 
COMMENT Beam window function used in the Component separation process
 
COMMENT
 
COMMENT Objects used:
 
COMMENT
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/CR-temporary
 
COMMENT /dx9delta_beams/dx9_delta_v1_7b_dust_beam.fits
 
COMMENT
 
COMMENT ---------------------------------------------------------------------
 
END
 
</pre -->
 
  
 
====Sky mask====
 
====Sky mask====
Line 783: Line 658:
 
|+ FITS header
 
|+ FITS header
 
|-
 
|-
 +
|- bgcolor="ffdead" 
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
Line 788: Line 664:
 
|}
 
|}
  
Below an example of the header.
+
== Thermal dust emission ==
<!-- pre>
 
XTENSION= 'BINTABLE'          / binary table extension
 
BITPIX  =                   8 / 8-bit bytes
 
NAXIS  =                   2 / 2-dimensional binary table
 
NAXIS1  =                   4 / width of table in bytes
 
NAXIS2  =            50331648 / number of rows in table
 
PCOUNT  =                    0 / size of special data area
 
GCOUNT  =                    1 / one data group (required keyword)
 
TFIELDS =                    1 / number of fields in each row
 
TTYPE1  = 'Mask    '          / label for field  1
 
TFORM1  = 'E      '          / data format of field: 4-byte REAL
 
TUNIT1  = 'none    '          / physical unit of field
 
EXTNAME = 'COMP-MAP'
 
DATE    = '2013-02-16T21:07:43' / file creation date (YYYY-MM-DDThh:mm:ss UT)
 
CHECKSUM= '5fQAAeQ45eQAAeQ3'  / HDU checksum updated 2013-02-16T21:07:44
 
DATASUM = '1075621420'        / data unit checksum updated 2013-02-16T21:07:44
 
COMMENT
 
COMMENT *** Planck params ***
 
COMMENT
 
PIXTYPE = 'HEALPIX '          / HEALPIX pixelisation
 
ORDERING= 'NESTED  '          / Pixel ordering scheme, either RING or NESTED
 
NSIDE  =                2048 / Resolution parameter for HEALPIX
 
FIRSTPIX=                    0 / First pixel # (0 based)
 
LASTPIX =            50331647 / Last pixel # (0 based)
 
INDXSCHM= 'IMPLICIT'          / Indexing: IMPLICIT or EXPLICIT
 
OBJECT  = 'FULLSKY '          / Sky coverage, either FULLSKY or PARTIAL
 
BAD_DATA=          -1.6375E+30
 
COORDSYS= 'GALACTIC'
 
FILENAME= 'COM_CompMap_Mask-rulerminimal_2048.fits'
 
COMMENT ---------------------------------------------------------------------
 
COMMENT Objects used:
 
COMMENT /sci_planck/lfi_dpc_test/ashdown/repository/compsep_outputs/CR-temporary
 
COMMENT /dx9delta_masks/deltadx9_ruler_mask_total_minimal.fits
 
COMMENT ---------------------------------------------------------------------
 
END
 
</pre -->
 
  
== Dust optical depth map and model ==
 
  
Thermal emission from interstellar dust is captured by Planck-HFI over the whole sky, at all frequencies from 100 to 857 GHz. This emission is well modelled by a modified black body in the far-infrared to millimeter range. It is produced by the biggest interstellar dust grain that are in thermal equilibrium with the radiation field from stars. The grains emission properties in the sub-millimeter are therefore directly linked to their absorption properties in the UV-visible range. By modelling the thermal dust emission in the sub-millimeter, a map of dust reddening in the visible can then be constructed.  
+
Thermal emission from interstellar dust is captured by Planck-HFI over the whole sky, at all frequencies from 100 to 857 GHz. This emission is well modelled by a modified black body in the far-infrared to millimeter range. It is produced by the biggest interstellar dust grain that are in thermal equilibrium with the radiation field from stars. The grains emission properties in the sub-millimeter are therefore directly linked to their absorption properties in the UV-visible range. By modelling the thermal dust emission in the sub-millimeter, a map of dust reddening in the visible can then be constructed. The details of the model can be found here {{PlanckPapers|planck2013-p06b}}.
  
; Model of thermal dust emission
+
=== Model of all-sky thermal dust emission ===
  
The model of the thermal dust emission is based on a modify black body fit to the data $I_\nu$
+
The model of the thermal dust emission is based on a modified black body (MBB) fit to the data <math>I_\nu</math>
  
$I_\nu = A\, B_\nu(T)\, \nu^\beta$
+
: <math>I_\nu = A\, B_\nu(T)\, \nu^\beta</math>
  
where B_nu(T) is the Planck function for dust equilibirum temperature T, A is the amplitude of the MBB and beta the dust spectral index. The dust optical depth at frequency nu is
+
where <math>B_\nu(T)</math> is the Planck function for dust equilibirum temperature <math>T</math>, <math>A</math> is the amplitude of the MBB and <math>\beta</math> the dust spectral index. The dust optical depth at frequency <math>\nu</math> is
  
$\tau_\nu = I_\nu / B_\nu(T) = A\, \nu^\beta$
+
: <math>\tau_\nu = I_\nu / B_\nu(T) = A\, \nu^\beta</math>
  
The dust parameters provided are $T$, beta and $\tau_{353}$. They were obtained by fitting the Planck data at 353, 545 and 857 GHz together with the IRAS (IRIS) 100 micron data. All maps (in Healpix N$_\rm{side}$=2048) were smoothed to a common resolution of 5 arcmin. The CMB anisotropies, clearly visible at 353 GHz, were removed from all the HFI maps using the SMICA map.  An offset was removed from each map to obtained a meaningful Galactic zero level, using a correlation with the LAB 21 cm data in diffuse areas of the sky ($N_{HI} < 2\times10^{20} cm^{-2}$). Because the dust emission is so well correlated between frequencies in the Rayleigh-Jeans part of the dust spectrum, the zero level of the 545 and 353 GHz were improved by correlating with the 857 GHz over a larger mask ($N_{HI} < 3\times10^{20} cm^{-2}$). Faint residual dipole structures, identified in the 353 and 545 GHz maps, were removed prior to the fit.
+
The dust parameters provided are <math>T</math>, <math>\beta</math> and <math>\tau_{353}</math>. They were obtained by fitting the Planck data at 353, 545 and 857 GHz (from which the Planck zodiacal light model was removed) together with the IRAS 100 micron data. The latter is a combination of the 100 micron maps from IRIS (Miville-Deschenes & Lagache, 2005) and from Schlegel et al. (1998), SFD1998. The IRIS (SFD1998) map is used at scales smaller (larger) than 30 arcmin; this combination allows to take advantage of the higher angular resolution and better control of gain variations of the IRIS map and of the better removal of the zodiacal light emission of the SFD1998 map.
  
The MBB fit was performed using a chi-square minimization, assuming errors for each data point that include instrumental noise, calibration uncertainties (on both the dust emission and the CMB anisotropies) and uncertainties on the zero level. Because of the known degeneracy between $T$ and $\beta$ in the presence of noise, we produced a model of dust emission using data smoothed to 35 arcmin; at such resolution no systematic bias of the parameters is observed. The map of the spectral index $\beta$ at 35 arcmin was than used to fit the data for $T$ and $\tau_{353}$ at 5 arcmin.  
+
All maps (in Healpix Nside=2048 were smoothed to a common resolution of 5 arcmin. The CMB anisotropies, clearly visible at 353 GHz, were removed from all the HFI maps using the SMICA map.  An offset was removed from each map to set a Galactic zero level, using a correlation with the LAB 21 cm data in diffuse areas of the sky (<math>N_{HI} < 2\times10^{20} cm^{-2}</math>). Because the dust emission is so well correlated between frequencies in the Rayleigh-Jeans part of the dust spectrum, the zero level of the 545 and 353 GHz were improved by correlating with the 857 GHz over a larger mask (<math>N_{HI} < 3\times10^{20} cm^{-2}</math>). Faint residual dipole structures, identified in the 353 and 545 GHz maps, were removed prior to the fit.
  
; The $E(B-V)$ map
+
The MBB fit was performed using a <math>\chi^2</math> minimization method, assuming errors for each data point that include instrumental noise, calibration uncertainties (on both the dust emission and the CMB anisotropies) and uncertainties on the zero levels. Because of the known degeneracy between <math>T</math> and <math>\beta</math> in the presence of noise, we performed tge fit in two steps. First we produced a model of dust emission using data smoothed to 30 arcmin; at such resolution no systematic bias of the parameters is observed. In a second step the map of the spectral index <math>\beta</math> at 30 arcmin was used to fit the data for <math>T</math> and <math>\tau_{353}</math> at 5 arcmin.  
For the production of the $E(B-V)$ map, we used Planck and IRAS data from which point sources in diffuse areas were removed to avoid contamination by galaxies. In the hypothesis of constant dust emission cross-section, the optical depth map $\tau_{353}$ is proportional to dust column density. It can then be used to estimate E(B-V), also proportional to dust column density in the hypothesis of a constant differential absorption cross-section between the B and V bands. Given those assumptions, $ E(B-V) = q\, \tau_{353}$.
 
  
To estimate the calibration factor q, we followed a method similar to <cite>#mortsell2013</cite> based on SDSS reddening measurements ($E(g-r)$ which corresponds closely to $E(B-V)$) of 77 429 Quasars <cite>#schneider2007</cite>. The interstellar HI column densities covered on the lines of sight of this sample ranges from $0.5$ to $10\times10^{20}\,cm^{-2}$. Therefore this sample allows to estimate q in the diffuse ISM where dust properties are expected to vary less than in denser clouds where coagulation and grain growth might modify dust emission and absorption cross sections.  
+
=== The <math>E(B-V)</math> map for extra-galactic studies===
 +
For the production of the <math>E(B-V)</math> map, we used a MBB fit to Planck and IRAS data from which point sources were removed to avoid contamination by galaxies.  In the hypothesis of constant dust emission cross-section, the optical depth map <math>\tau_{353}</math> is proportional to dust column density and therefore often used to estimate E(B-V). The analysis of Planck data revealed that the ratio <math>\tau_{353}/N_{HI}</math> and <math>\tau_{353}/E(B-V)</math> are not constant, even in the diffuse ISM, but that they depend on <math>T</math> revealing possible spatial variations of the dust emission cross-section. It appears that the dust radiance, <math>R</math>, i.e. the dust emission integrated in frequency, is a better tracer of column density in the diffuse ISM, implying small spatial variations of the radiation field strength at high Galactic latitude.  
 +
Given those results, we also deliver the map of <math>R</math> as a dust product and we propose to use it as an estimator of Galactic dust reddening for extra-galactic studies: <math>E(B-V) = q\, R</math>.
  
; Dust optical depth products
+
To estimate the calibration factor q, we followed a method similar to{{BibCite|mortsell2013}} based on SDSS reddening measurements of quasars in the u, g, r, i and z bands{{BibCite|schneider2007}}. We used a sample of 53 399 quasars, selecting objects at redshifts for which Ly<math>\alpha</math> does not enter the SDSS filters. The interstellar HI column densities covered on the lines of sight of this sample ranges from <math>0.5</math> to <math>10\times10^{20}\,cm^{-2}</math>. Therefore this sample allows us to estimate q in the diffuse ISM where this map of E(B-V) is intended to be used.
  
The characteristics of the dust model maps are the following.
+
=== Dust optical depth products ===
* Dust optical depth at 353 GHz : N$_\rm{side}$=2048, fwhm=5 arcmin, no units
+
The dust model maps are found in the file {{PLASingleFile|fileType=map|name=HFI_CompMap_ThermalDustModel_2048_R1.20.fits|link=HFI_CompMap_ThermalDustModel_2048_R1.20.fits}} (see the note [[#noteOnDust|below]] for an important clarification regarding the thermal dust model); its characteristics are:
* Dust reddening E(B-V) : N$_\rm{side}$=2048, fwhm=5 arcmin, units=magnitude, obtained with data from which point sources were removed.
+
* Dust optical depth at 353 GHz: Nside=2048, fwhm=5', no units
* Dust temperature : N$_\rm{side}$ 2048, fwhm=5 arcmin, units=Kelvin
+
* Dust temperature: Nside 2048, fwhm=5', units=Kelvin
* Dust spectral index : N$_\rm{side}$=2048, fwhm=35 arcmin, no units
+
* Dust spectral index: Nside=2048, fwhm=30', no units
 +
* Dust radiance: Nside=2048, fwhm=5', units=Wm<sup>-2</sup>sr<sup>-1</sup>
 +
* E(B-V) for extragalactic studies: Nside=2048, fwhm=5', units=magnitude, obtained with data from which point sources were removed.
  
  
Line 865: Line 707:
 
! Column Name || Data Type || Units || Description
 
! Column Name || Data Type || Units || Description
 
|-
 
|-
| TAU353 || Real*4 || none || The opacity at 353GHz
+
| TAU353 || Real*4 || none || The optical depth at 353GHz
 
|-
 
|-
| TAU353ERR || Real*4 || none || Error in the opacity
+
| ERR_TAU || Real*4 || none || Error on the optical depth
 
|-
 
|-
| EBV || Real*4 || mag || E(B-V)
+
| EBV || Real*4 || mag || E(B-V) for extra-galactic studies
 
|-
 
|-
| EBV_ERR || Real*4 || mag || Error in E(B-V)
+
| RADIANCE || Real*4 || Wm<sup>-2</sup>sr<sup>-1</sup> || Integrated emission
 
|-
 
|-
|T_HF || Real*4 || K || Temperature for the high frequency correction
+
|TEMP || Real*4 || K || Dust temperature
 
|-
 
|-
|T_HF_ERR || Real*4 || K || Error on the temperature
+
|ERR_TEMP || Real*4 || K || Error on the temperature
 
|-
 
|-
| BETAHF || Real*4 || none || Beta for the high frequency correction
+
| BETA || Real*4 || none || Dust spectral index
 
|-
 
|-
| BETAHFERR || Real*4 || none || Error on beta
+
| ERR_BETA || Real*4 || none || Error on Beta
 
|-
 
|-
 
|- bgcolor="ffdead"   
 
|- bgcolor="ffdead"   
 
! Keyword || Data Type || Value || Description
 
! Keyword || Data Type || Value || Description
 
|-
 
|-
| AST-COMP ||  String || DUST-OPA|| Astrophysical compoment name
+
| AST-COMP ||  String || DUST|| Astrophysical compoment name
 
|-
 
|-
 
| PIXTYPE ||  String || HEALPIX ||
 
| PIXTYPE ||  String || HEALPIX ||
Line 892: Line 734:
 
| ORDERING || String || NESTED  || Healpix ordering
 
| ORDERING || String || NESTED  || Healpix ordering
 
|-
 
|-
| NSIDE  ||  Int || 2048 || Healpix N$_\rm{side}$ for LFI and HFI, respectively
+
| NSIDE  ||  Int || 2048 || Healpix Nside for LFI and HFI, respectively
 
|-
 
|-
 
| FIRSTPIX ||  Int*4 ||          0 || First pixel number
 
| FIRSTPIX ||  Int*4 ||          0 || First pixel number
Line 898: Line 740:
 
| LASTPIX ||  Int*4 || 50331647 || Last pixel number, for LFI and HFI, respectively
 
| LASTPIX ||  Int*4 || 50331647 || Last pixel number, for LFI and HFI, respectively
 
|}
 
|}
 +
 +
 +
 +
<div id="noteOnDust"></div><span style="font-size:120%"> <span style="color:Red"><b>IMPORTANT NOTE:</b></span></span> The dust model has recently (4 December 2013) been updated and the new model is the one being distributed by default. A detailed description of the model can be found here {{PlanckPapers|planck2013-p06b}}. Users interested in the old dust model map should contact the [http://www.sciops.esa.int/helpdesk_pia PLA help desk].
  
 
== CO emission maps ==
 
== CO emission maps ==
  
CO rotational transition line emission is present in all HFI bands but for the 143 GHz channel. It is especially significant in the 100, 217 and 353 GHz channels (due to the 115 (1-0), 230 (2-1) and 345 GHz (3-2) CO transitions). This emission comes essentially from the Galactic interstellar medium and is mainly located at low and intermediate Galactic latitudes. Three approaches (summarised below) have been used to extract CO velocity-integrated emission maps from HFI maps and to make three types of CO products. An introduction is given in [[Science#CO_maps|Section]] and a full description of these products is given in <cite>#planck2013-p03a</cite>.
+
 
 +
CO rotational transition line emission is present in all HFI bands but for the 143 GHz channel. It is especially significant in the 100, 217 and 353 GHz channels (due to the 115 (1-0), 230 (2-1) and 345 GHz (3-2) CO transitions). This emission comes essentially from the Galactic interstellar medium and is mainly located at low and intermediate Galactic latitudes. Three approaches (summarised below) have been used to extract CO velocity-integrated emission maps from HFI maps and to make three types of CO products. A full description of how these products were produced is given in {{PlanckPapers|planck2013-p03a}}.
 +
 
 
* Type 1 product: it is based on a single channel approach using the fact that each CO line has a slightly different transmission in each bolometer at a given frequency channel. These transmissions can be evaluated from bandpass measurements that were performed on the ground or empirically determined from the sky using existing ground-based CO surveys. From these, the J=1-0, J=2-1 and J=3-2 CO lines can be extracted independently. As this approach is based on individual bolometer maps of a single channel, the resulting Signal-to-Noise ratio (SNR) is relatively low. The benefit, however, is that these maps do not suffer from contamination from other HFI channels (as is the case for the other approaches) and are more reliable, especially in the Galactic Plane.
 
* Type 1 product: it is based on a single channel approach using the fact that each CO line has a slightly different transmission in each bolometer at a given frequency channel. These transmissions can be evaluated from bandpass measurements that were performed on the ground or empirically determined from the sky using existing ground-based CO surveys. From these, the J=1-0, J=2-1 and J=3-2 CO lines can be extracted independently. As this approach is based on individual bolometer maps of a single channel, the resulting Signal-to-Noise ratio (SNR) is relatively low. The benefit, however, is that these maps do not suffer from contamination from other HFI channels (as is the case for the other approaches) and are more reliable, especially in the Galactic Plane.
 
 
* Type 2 product: this product is obtained using a multi frequency approach. Three frequency channel maps are combined to extract the J=1-0 (using the 100, 143 and 353 GHz channels) and J=2-1 (using the 143, 217 and 353 GHz channels) CO maps. Because frequency channels are combined, the spectral behaviour of other foregrounds influences the result. The two type 2 CO maps produced in this way have a higher SNR than the type 1 maps at the cost of a larger possible residual contamination from other diffuse foregrounds.
 
* Type 2 product: this product is obtained using a multi frequency approach. Three frequency channel maps are combined to extract the J=1-0 (using the 100, 143 and 353 GHz channels) and J=2-1 (using the 143, 217 and 353 GHz channels) CO maps. Because frequency channels are combined, the spectral behaviour of other foregrounds influences the result. The two type 2 CO maps produced in this way have a higher SNR than the type 1 maps at the cost of a larger possible residual contamination from other diffuse foregrounds.
 
 
* Type 3 product: using prior information on CO line ratios and a multi-frequency component separation method, we construct a combined CO emission map with the largest possible SNR. This type 3 product can be used as a sensitive finder chart for low-intensity diffuse CO emission over the whole sky.
 
* Type 3 product: using prior information on CO line ratios and a multi-frequency component separation method, we construct a combined CO emission map with the largest possible SNR. This type 3 product can be used as a sensitive finder chart for low-intensity diffuse CO emission over the whole sky.
  
The released Type 1 CO maps have been produced using the MILCA-b algorithm, Type 2 maps using a specific implementation of the Commander algorithm, and the Type 3 map using the full Commander-Ruler component separation pipeline (see [[Astrophysical_component_maps#Maps_of_astrophysical_foregrounds|above]]).
+
The released Type 1 CO maps have been produced using the MILCA-b algorithm, Type 2 maps using a specific implementation of the Commander algorithm, and the Type 3 map using the full Commander-Ruler component separation pipeline (see [[CMB_and _astrophysical_component_maps#Maps_of_astrophysical_foregrounds | above]]).
  
Characteristics of the released maps are the following. We provide Healpix maps with N$_\rm{side}$=2048. For one transition, the CO velocity-integrated line signal map is given in K_RJ.km/s units. A conversion factor from this unit to the native unit of HFI maps (K_CMB) is provided in the header of the data files and in the RIMO. Four maps are given per transition and per type:
+
Characteristics of the released maps are the following. We provide Healpix maps with Nside=2048. For one transition, the CO velocity-integrated line signal map is given in K_RJ.km/s units. A conversion factor from this unit to the native unit of HFI maps (K_CMB) is provided in the header of the data files and in the RIMO. Four maps are given per transition and per type:
 
* The signal map
 
* The signal map
 
* The standard deviation map (same unit as the signal),  
 
* The standard deviation map (same unit as the signal),  
Line 964: Line 810:
 
|ORDERING || String || NESTED  || Healpix ordering
 
|ORDERING || String || NESTED  || Healpix ordering
 
|-
 
|-
|NSIDE  ||  Int || 2048 || Healpix N$_\rm{side}$ for LFI and HFI, respectively
+
|NSIDE  ||  Int || 2048 || Healpix Nside for LFI and HFI, respectively
 
|-
 
|-
 
|FIRSTPIX ||  Int*4 ||                  0 || First pixel number
 
|FIRSTPIX ||  Int*4 ||                  0 || First pixel number
Line 1,061: Line 907:
  
 
== References ==
 
== References ==
<biblio force=false>
+
 
#[[References]]
+
 
</biblio>
+
<References />
 +
 +
 +
 
  
  
  
 
[[Category:Mission products|007]]
 
[[Category:Mission products|007]]

Latest revision as of 09:26, 20 June 2016

Overview[edit]

This section describes the maps of astrophysical components produced from the Planck data. These products are derived from some or all of the nine frequency channel maps described above using different techniques and, in some cases, using other constraints from external data sets. Here we give a brief description of the product and how it is obtained, followed by a description of the FITS file containing the data and associated information. All the details can be found in Planck-2013-XII[1].

CMB maps[edit]

CMB maps have been produced by the SMICA, NILC, SEVEM and COMMANDER-Ruler pipelines. Of these, the SMICA product is considered the preferred one overall and is labelled Main product in the Planck Legacy Archive, while the other two are labeled as Additional product.

SMICA and NILC also produce inpainted maps, in which the Galactic Plane, some bright regions and masked point sources are replaced with a constrained CMB realization such that the whole map has the same statistical distribution as the observed CMB.

The results of SMICA, NILC and SEVEM pipeline are distributed as a FITS file containing 4 extensions:

  1. CMB maps and ancillary products (3 or 6 maps)
  2. CMB-cleaned foreground maps from LFI (3 maps)
  3. CMB-cleaned foreground maps from HFI (6 maps)
  4. Effective beam of the CMB maps (1 vector)

The results of COMMANDER-Ruler are distributed as two FITS files (the high and low resolution) containing the following extensions: High resolution N$_\rm{side}$=2048 (note that we don't provide the CMB-cleaned foregrounds maps for LFI and HFI because the Ruler resolution (~7.4') is lower than the HFI highest channel and and downgrading it will introduce noise correlation).

  1. CMB maps and ancillary products (4 maps)
  2. Effective beam of the CMB maps (1 vector)

Low resolution N$_\rm{side}$=256

  1. CMB maps and ancillary products (3 maps)
  2. 10 example CMB maps used in the montecarlo realization (10 maps)
  3. Effective beam of the CMB maps (1 vector)

For a complete description of the data structure, see the below; the content of the first extensions is illustrated and commented in the table below.


The maps (CMB, noise, masks) contained in the first extension
Col name SMICA NILC SEVEM COMMANDER-Ruler H COMMANDER-Ruler L Description / notes
1: I CMB-smica.png CMB-nilc.png CMB-sevem.png CMB-CR h.png CMB-CR l.png Raw CMB anisotropy map. These are the maps used in the component separation paper Planck-2013-XII[1].
2: NOISE CMBnoise-smica.png CMBnoise-nilc.png CMBnoise-sevem.png CMBnoise-CR h.png not applicable Noise map. Obtained by propagating the half-ring noise through the CMB cleaning pipelines.
3: VALMASK Valmask-smica.png Valmask-nilc.png Valmask-sevem.png Valmask-cr h.png Valmask-cr l.png Confidence map. Pixels with an expected low level of foreground contamination. These maps are only indicative and obtained by different ad hoc methods. They cannot be used to rank the CMB maps.
4: I_MASK Cmbmask-smica.png Cmbmask-nilc.png not applicable not applicable not applicable Some areas are masked for the production of the raw CMB maps (for NILC: point sources from 44 GHz to 857 GHz; for SMICA: point sources from 30 GHz to 857 GHz, Galatic region and additional bright regions).
5: INP_CMB CMBinp-smica.png CMBinp-nilc.png not applicable not applicable not applicable Inpainted CMB map. The raw CMB maps with some regions (as indicated by INP_MASK) replaced by a constrained Gaussian realization. The inpainted SMICA map was used for PR.
6: INP_MASK Inpmask-smica.png Inpmask-nilc.png not applicable not applicable not applicable Mask of the inpainted regions. For SMICA, this is identical to I_MASK. For NILC, it is not.

The component separation pipelines are described in the CMB and foreground separation section and also in Section 3 and Appendices A-D of Planck-2013-XII[1] and references therein.

The union (or common) mask is defined as the union of the confidence masks from the four component separation pipelines, the three listed above and Commander-Ruler. It leaves 73% of the sky available, and so it is denoted as U73.


Product description[edit]

SMICA[edit]

Principle
SMICA produces a CMB map by linearly combining all Planck input channels (from 30 to 857 GHz) with weights which vary with the multipole. It includes multipoles up to [math]\ell = 4000[/math].
Resolution (effective beam)
The SMICA map has an effective beam window function of 5 arc-minutes truncated at [math]\ell=4000[/math] and deconvolved from the pixel window. It means that, ideally, one would have [math]C_\ell(map) = C_\ell(sky) * B_\ell(5')^2[/math], where [math]C_\ell(map)[/math] is the angular spectrum of the map, where [math]C_\ell(sky)[/math] is the angular spectrum of the CMB and [math]B_\ell(5')[/math] is a 5-arcminute Gaussian beam function. Note however that, by convention, the effective beam window function [math]B_\ell(fits)[/math] provided in the FITS file does include a pixel window function. Therefore, it is equal to [math]B_\ell(fits) = B_\ell(5') / p_\ell(2048)[/math] where [math]p_\ell(2048)[/math] denotes the pixel window function for an Nside=2048 pixelization.
Confidence mask
A confidence mask is provided which excludes some parts of the Galactic plane, some very bright areas and the masked point sources. This mask provides a qualitative (and subjective) indication of the cleanliness of a pixel.
Masks and inpainting
The raw SMICA CMB map has valid pixels except at the location of masked areas: point sources, Galactic plane, some other bright regions. Those invalid pixels are indicated with the mask named 'I_MASK'. The raw SMICA map has been inpainted, producing the map named "INP_CMB". Inpainting consists in replacing some pixels (as indicated by the mask named INP_MASK) by the values of a constrained Gaussian realization which is computed to ensure good statistical properties of the whole map (technically, the inpainted pixels are a sample realisation drawn under the posterior distribution given the un-masked pixels.

NILC[edit]

Principle
The Needlet-ILC (hereafter NILC) CMB map is constructed from all Planck channels from 44 to 857 GHz and includes multipoles up to [math]\ell = 3200[/math]. It is obtained by applying the Internal Linear Combination (ILC) technique in needlet space, that is, with combination weights which are allowed to vary over the sky and over the whole multipole range.
Resolution (effective beam)
As in the SMICA product except that there is no abrupt truncation at [math]\ell_{max}= 3200[/math] but a smooth transition to [math]0[/math] over the range [math]2700\leq\ell\leq 3200[/math].
Confidence mask
A confidence mask is provided which excludes some parts of the Galactic plane, some very bright areas and the masked point sources. This mask provides a qualitative indication of the cleanliness of a pixel. The threshold is somewhat arbitrary.
Masks and inpainting
The raw NILC map has valid pixels except at the location of masked point sources. This is indicated with the mask named 'I_MASK'. The raw NILC map has been inpainted, producing the map named "INP_CMB". The inpainting consists in replacing some pixels (as indicated by the mask named INP_MASK) by the values of a constrained Gaussian realization which is computed to ensure good statistical properties of the whole map (technically, the inpainted pixels are a sample realisation drawn under the posterior distribution given the un-masked pixels.

SEVEM[edit]

The aim of SEVEM is to produce clean CMB maps at one or several frequencies by using a procedure based on template fitting. The templates are internal, i.e., they are constructed from Planck data, avoiding the need for external data sets, which usually complicates the analyses and may introduce inconsistencies. The method has been successfully applied to Planck simulations[2] and to WMAP polarisation data[3]. In the cleaning process, no assumptions about the foregrounds or noise levels are needed, rendering the technique very robust. Note that unlike the other products, SEVEM does not provide the mask of regions not used in the productions of the CMB ma (I_MASK) nor an inpainted version of the map and its associated mask. On the other hand, it provides channel maps and 100, 143, and 217 GHz which are used as the building blocks of the final map.

COMMANDER-Ruler[edit]

COMMANDER-Ruler is the Planck software implementing a pixel based parametric component separation. Amplitude of CMB and the main diffuse foregrounds along with the relevant spectral parameters for those (see below in the Astrophysical Foreground Section for the latter) are parametrized and fitted in single MCMC chains conducted at $N_\rm{side}$=256 using COMMANDER, implementing a Gibbs Sampling. The CMB amplitude which is obtained in these runs corresponds to the delivered low resolution CMB component from COMMANDER-Ruler which has a FWHM of 40 arcminutes. The sampling of the foreground parameters is applied to the data at full resolution for obtaining the high resolution CMB component from Ruler which is available on the PLA. In the Planck Component Separation paper[1] additional material is discussed, specifically concerning the sky region where the solutions are reliable, in terms of chi2 maps. The products mainly consist of:

  • Maps of the Amplitudes of the CMB at low resolution, $N_\rm{side}$=256, along with the standard deviations of the outputs, beam profiles derived from the production process.
  • Maps of the CMB amplitude, along with the standard deviations, at high resolution, $N_\rm{side}$=2048, beam profiles derived from the production process.
  • Mask obtained on the basis of the precision in the fitting procedure; the thresholding is evaluated through the COMMANDER-Ruler likelihood analysis and excludes 13% of the sky, see Planck-2013-XII[1].

Production process[edit]

SMICA[edit]

1) Pre-processing
All input maps undergo a pre-processing step to deal with point sources. The point sources with SNR > 5 in the PCCS catalogue are fitted in each input map. If the fit is successful, the fitted point source is removed from the map; otherwise it is masked and the hole is filled in by a simple diffusive process to ensure a smooth transition and mitigate spectral leakage. This is done at all frequencies but 545 and 857 GHz, here all point sources with SNR > 7.5 are masked and filled-in similarly.
2) Linear combination
The nine pre-processed Planck frequency channels from 30 to 857 GHzare harmonically transformed up to [math]\ell = 4000[/math] and co-added with multipole-dependent weights as shown in the figure.
3) Post-processing
The areas masked in the pre-processing step are replaced by a constrained Gaussian realization.

Note: The visible power deficit in the raw CMB map around the galactic plane is due to the smooth fill-in of the masked areas in the input maps (the result of the pre-processing). It is not to be confused with the post-processing step of inpainting of the CMB map with a constrained Gaussian realization.


Weights given by SMICA to the input maps (after they are re-beamed to 5 arcmin and expressed in K[math]_\rm{RJ}[/math]), as a function of multipole.

NILC[edit]

1) Pre-processing
Same pre-processing as SMICA (except the 30 GHz channel is not used).
2) Linear combination
The pre-processed Planck frequency channels from 44 to 857 GHz are linearly combined with weights which depend on location on the sky and on the multipole range up to [math]\ell = 3200[/math]. This is achieved using a needlet (redundant spherical wavelet) decomposition. For more details, see Planck-2013-XII[1].
3) Post-processing
The areas masked in the pre-processing plus other bright regions step are replaced by a constrained Gaussian realization as in the SMICA post-processing step.

SEVEM[edit]

The templates are internal, i.e., they are constructed from Planck data, avoiding the need for external data sets, which usually complicates the analyses and may introduce inconsistencies. In the cleaning process, no assumptions about the foregrounds or noise levels are needed, rendering the technique very robust. The fitting can be done in real or wavelet space (using a fast wavelet adapted to the HEALPix pixelization[4]) to properly deal with incomplete sky coverage. By expediency, however, we fill in the small number of unobserved pixels at each channel with the mean value of its neighbouring pixels before applying SEVEM.

We construct our templates by subtracting two close Planck frequency channel maps, after first smoothing them to a common resolution to ensure that the CMB signal is properly removed. A linear combination of the templates [math]t_j[/math] is then subtracted from (hitherto unused) map d to produce a clean CMB map at that frequency. This is done either in real or in wavelet space (i.e., scale by scale) at each position on the sky: [math] T_c(\mathbf{x}, ν) = d(\mathbf{x}, ν) − \sum_{j=1}^{n_t} α_j t(\mathbf{x}) [/math] where [math]n_t[/math] is the number of templates. If the cleaning is performed in real space, the [math]α_j[/math] coefficients are obtained by minimising the variance of the clean map [math]T_c[/math] outside a given mask. When working in wavelet space, the cleaning is done in the same way at each wavelet scale independently (i.e., the linear coefficients depend on the scale). Although we exclude very contaminated regions during the minimization, the subtraction is performed for all pixels and, therefore, the cleaned maps cover the full-sky (although we expect that foreground residuals are present in the excluded areas).

An additional level of flexibility can also be considered: the linear coefficients can be the same for all the sky, or several regions with different sets of coefficients can be considered. The regions are then combined in a smooth way, by weighting the pixels at the boundaries, to avoid discontinuities in the clean maps. Since the method is linear, we may easily propagate the noise properties to the final CMB map. Moreover, it is very fast and permits the generation of thousands of simulations to character- ize the statistical properties of the outputs, a critical need for many cosmological applications. The final CMB map retains the angular resolution of the original frequency map.

There are several possible configurations of SEVEM with regard to the number of frequency maps which are cleaned or the number of templates that are used in the fitting. Note that the production of clean maps at different frequencies is of great interest in order to test the robustness of the results. Therefore, to define the best strategy, one needs to find a compromise between the number of maps that can be cleaned independently and the number of templates that can be constructed.

In particular, we have cleaned the 143 GHz and 217 GHz maps using four templates constructed as the difference of the following Planck channels (smoothed to a common resolution): (30-44), (44-70), (545-353) and (857-545). For simplicity, the three maps have been cleaned in real space, since there was not a significant improvement when using wavelets (especially at high latitude). In order to take into account the different spectral behaviour of the foregrounds at low and high galactic latitudes, we have considered two independent regions of the sky, for which we have used a different set of coefficients. The first region corresponds to the 3 per cent brightest Galactic emission, whereas the second region is defined by the remaining 97 per cent of the sky. For the first region, the coefficients are actually estimated over the whole sky (we find that this is more optimal than perform the minimisation only on the 3 per cent brightest region, where the CMB emission is very sub-dominant) while for the second region, we exclude the 3 per cent brightest region of the sky, point sources detected at any frequency and those pixels which have not been observed at all channels. Our final CMB map has then been constructed by combining the 143 and 217 GHz maps by weighting the maps in harmonic space taking into account the noise level, the resolution and a rough estimation of the foreground residuals of each map (obtained from realistic simulations). This final map has a resolution corresponding to a Gaussian beam of fwhm=5 arcminutes.

Moreover, additional CMB clean maps (at frequencies between 44 and 353 GHz) have also been produced using different combinations of templates for some of the analyses carried out in Planck-2013-XXIII[5] and Planck-2013-XIX[6]. In particular, clean maps from 44 to 353 GHz have been used for the stacking analysis presented in Planck-2013-XIX[6], while frequencies from 70 to 217 GHz were used for consistency tests in Planck-2013-XXIII[5].

COMMANDER-Ruler[edit]

The production process consist in low and high resolution runs according to the description above.

Low Resolution Runs
Same as the Astrophysics Foregrounds Section below; The CMB amplitude is fitted along with the other foreground parameters and constitutes the CMB Low Resolution Rendering which is in the PLA.
Ruler Runs
the sampling at high resolution is used to infer the probability distribution of spectral parameters which is exploited at full resolution in order to obtain the High Resolution CMB Rendering which is in the PLA.

Masks[edit]

Summary table with the different masks that have been used by the component separation methods to pre-process and to process the frequency maps and the CMB maps.

Commander 2013 (PR1) Used for diffuse inpainting of input frequency maps Used for constrained Gaussian realization inpaiting of CMB map Description
VALMASK NO NO VALMASK is the confidence mask that defines the region where the reconstructed CMB is trusted. It can be found inside

COM_CompMap_CMB-commrul_2048_R1.00.fits and COM_CompMap_CMB-commrul_0256_R1.00.fits for low resolution analyses.

SEVEM 2013 (PR1) Used diffuse inpainting of input frequency maps Used for Constrained Gaussian realization inpaiting of CMB map Description
VALMASK NO NO VALMASK is the confidence mask that defines the region where the reconstructed CMB is trusted. It can be found inside

COM_CompMap_CMB-sevem_2048_R1.12.fits.

NILC 2013 (PR1) Used for diffuse inpainting of input frequency maps Used for constrained Gaussian realization inpaiting of CMB map Description
VALMASK NO NO VALMASK is the confidence mask that defines the region where the reconstructed CMB is trusted. It can be found inside COM_CompMap_CMB-nilc_2048_R1.20.fits.
I_MASK NO NO I_MASK defines the regions over which CMB is not built. It is a combination of point source masks, Galactic plane mask and other bright regions like LMC, SMC, etc. It can be found inside COM_CompMap_CMB-nilc_2048_R1.20.fits.
INP_MASK NO YES It can be found inside COM_CompMap_CMB-nilc_2048_R1.20.fits.
SMICA 2013 (PR1) Used for diffuse inpainting of input frequency maps Used for constrained Gaussian realization inpaiting of CMB map Description
VALMASK NO NO VALMASK is the confidence mask that defines the region where the reconstructed CMB is trusted. It can be found inside

COM_CompMap_CMB-smica_2048_R1.20.fits.

I_MASK YES YES I_MASK defines the regions over which CMB is not built. It is a combination of point source masks, Galactic plane mask and other bright regions like LMC, SMC, etc. It can be found inside COM_CompMap_CMB-smica_2048_R1.20.fits.
INP_MASK YES YES INP_MASK for SMICA 2013 release is identical to I_MASK above.


Inputs[edit]

The input maps are the sky temperature maps described in the Sky temperature maps section. SMICA and SEVEM use all the maps between 30 and 857 GHz; NILC uses the ones between 44 and 857 GHz. Commander-Ruler uses frequency channel maps from 30 to 353 GHz.

File names and structure[edit]

The FITS files corresponding to the three CMB products are the following:


The files contain a minimal primary extension with no data and four BINTABLE data extensions. Each column of the BINTABLE is a (Healpix) map; the column names and the most important keywords of each extension are described in the table below; for the remaining keywords, please see the FITS files directly.


CMB map file data structure
Ext. 1. EXTNAME = COMP-MAP (BINTABLE)
Column Name Data Type Units Description
I Real*4 uK_cmb CMB temperature map
NOISE Real*4 uK_cmb Estimated noise map (note 1)
I_STDEV Real*4 uK_cmb Standard deviation, ONLY on COMMANDER-Ruler products
VALMASK Byte none Confidence mask (note 2)
I_MASK Byte none Mask of regions over which CMB map is not built (Optional - see note 3)
INP_CMB Real*4 uK_cmb Inpainted CMB temperature map (Optional - see note 3)
INP_MASK Byte none mask of inpainted pixels (Optional - see note 3)
Keyword Data Type Value Description
AST-COMP String CMB Astrophysical compoment name
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 2048 Healpix Nside
METHOD String name Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
Ext. 2. EXTNAME = FGDS-LFI (BINTABLE) - Note 4
Column Name Data Type Units Description
LFI_030 Real*4 K_cmb 30 GHz foregrounds
LFI_044 Real*4 K_cmb 44 GHz foregrounds
LFI_070 Real*4 K_cmb 70 GHz foregrounds
Keyword Data Type Value Description
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 1024 Healpix Nside
METHOD String name Cleaning method (SMICA/NILC/SEVEM)
Ext. 3. EXTNAME = FGDS-HFI (BINTABLE) - Note 4
Column Name Data Type Units Description
HFI_100 Real*4 K_cmb 100 GHz foregrounds
HFI_143 Real*4 K_cmb 143 GHz foregrounds
HFI_217 Real*4 K_cmb 217 GHz foregrounds
HFI_353 Real*4 K_cmb 353 GHz foregrounds
HFI_545 Real*4 MJy/sr 545 GHz foregrounds
HFI_857 Real*4 MJy/sr 857 GHz foregrounds
Keyword Data Type Value Description
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 2048 Healpix Nside
METHOD String name Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
Ext. 4. EXTNAME = BEAM_WF (BINTABLE)
Column Name Data Type Units Description
BEAM_WF Real*4 none The effective beam window function, including the pixel window function. See Note 5.
Keyword Data Type Value Description
LMIN Int value First multipole of beam WF
LMAX Int value Lsst multipole of beam WF
METHOD String name Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)

Notes:

  1. The half-ring half-difference (HRHD) map is made by passing the half-ring frequency maps independently through the component separation pipeline, then computing half their difference. It approximates a noise realisation, and gives an indication of the uncertainties due to instrumental noise in the corresponding CMB map.
  2. The confidence mask indicates where the CMB map is considered valid.
  3. This column is not present in the SEVEM and COMMANDER-Ruler product file. For SEVEM these three columns give the CMB channel maps at 100, 143, and 217 GHz (columns C100, C143, and C217, in units of K_cmb.
  4. The subtraction of the CMB from the sky maps in order to produce the foregrounds map is done after convolving the CMB map to the resolution of the given frequency. Those columns are not present in the COMMANDER-Ruler product file.
  5. The beam window function [math]B_\ell[/math] given here includes the pixel window function [math]p_\ell[/math] for the Nside=2048 pixelization. It means that, ideally, [math]C_\ell(map) = C_\ell(sky) \, B_\ell^2 \, p_\ell^2[/math].

The low resolution COMMANDER-Ruler CMB product is organized in the following way:

CMB low resolution COMMANDER-Ruler map file data structure
Ext. 1. EXTNAME = COMP-MAP (BINTABLE)
Column Name Data Type Units Description
I Real*4 uK_cmb CMB temperature map obtained as average over 1000 samples
I_stdev Real*4 uK_cmb Corresponding Standard deviation amongst the 1000 samples
VALMASK Byte none Confidence mask
Keyword Data Type Value Description
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 2048 Healpix Nside
METHOD String name Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
Ext. 2. EXTNAME = CMB-Sample (BINTABLE)
Column Name Data Type Units Description
I_SIM01 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM02 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM03 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM04 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM05 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM06 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM07 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM08 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM09 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
I_SIM10 Real*4 K_cmb CMB Sample, smoothed to 40 arcmin
Keyword Data Type Value Description
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 1024 Healpix Nside
METHOD String name Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)
Ext. 4. EXTNAME = BEAM_WF (BINTABLE)
Column Name Data Type Units Description
BEAM_WF Real*4 none The effective beam window function, including the pixel window function.
Keyword Data Type Value Description
LMIN Int value First multipole of beam WF
LMAX Int value Lsst multipole of beam WF
METHOD String name Cleaning method (SMICA/NILC/SEVEM/COMMANDER-Ruler)


The FITS files containing the union (or common) maks is:

which contains a single BINTABLE extension with a single column (named U73) for the mask, which is boolean (FITS TFORM = B), in GALACTIC coordinates, NESTED ordering, and Nside=2048.

For the benefit of users who are only looking for a small file containing the SMICA cmb map with no additional information (noise or masks) we provide such a file here

This file contains a single extension with a single column containing the SMICA cmb temperature map.

Cautionary notes[edit]

  1. The half-ring CMB maps are produced by the pipelines with parameters/weights fixed to the values obtained from the full maps. Therefore the CMB HRHD maps do not capture all of the uncertainties due to foreground modelling on large angular scales.
  2. The HRHD maps for the HFI frequency channels underestimate the noise power spectrum at high l by typically a few percent. This is caused by correlations induced in the pre-processing to remove cosmic ray hits. The CMB is mostly constrained by the HFI channels at high l, and so the CMB HRHD maps will inherit this deficiency in power.
  3. The beam transfer functions do not account for uncertainties in the beams of the frequency channel maps.

Astrophysical foregrounds from parametric component separation[edit]

We describe diffuse foreground products for the Planck 2013 release. See Planck Component Separation paper Planck-2013-XII[1] for a detailed description and astrophysical discussion of those.

Product description[edit]

Low frequency foreground component
The products below contain the result of the fitting for one foreground component at low frequencies in Planck bands,along with its spectral behavior parametrized by a power law spectral index. Amplitude and spectral indeces are evaluated at N$_\rm{side}$ 256 (see below in the production process), along with standard deviation from sampling and instrumental noise on both. An amplitude solution at N$_\rm{side}$=2048 is also given, along with standard deviation from sampling and instrumental noise as well as solutions on halfrings. The beam profile associated to this component is also provided as a secondary Extension in the N$_\rm{side}$ 2048 product.
Thermal dust
The products below contain the result of the fitting for one foreground component at high frequencies in Planck bands, along with its spectral behavior parametrized by temperature and emissivity. Amplitude, temperature and emissivity are evaluated at N$_\rm{side}$ 256 (see below in the production process), along with standard deviation from sampling and instrumental noise on all of them. An amplitude solution at N$_\rm{side}$=2048 is also given, along with standard deviation from sampling and instrumental noise as well as solutions on halfrings. The beam profile associated to this component is provided.
Sky mask
The delivered mask is defined as the sky region where the fitting procedure was conducted and the solutions presented here were obtained. It is made by masking a region where the Galactic emission is too intense to perform the fitting, plus the masking of brightest point sources.

Production process[edit]

CODE: COMMANDER-RULER. The code exploits a parametrization of CMB and main diffuse foreground observables. The naive resolution of input frequency channels is reduced to N$_\rm{side}$=256 first. Parameters related to the foreground scaling with frequency are estimated at that resolution by using Markov Chain Monte Carlo analysis using Gibbs sampling. The foreground parameters make the foreground mixing matrix which is applied to the data at full resolution in order to obtain the provided products at N$_\rm{side}$=2048. In the Planck Component Separation paper Planck-2013-XII[1] additional material is discussed, specifically concerning the sky region where the solutions are reliable, in terms of chi2 maps.

Inputs[edit]

Nominal frequency maps at 30, 44, 70, 100, 143, 217, 353 GHz (LFI 30 GHz frequency maps, LFI 44 GHz frequency maps and LFI 70 GHz frequency maps, HFI 100 GHz frequency maps, HFI 143 GHz frequency maps,HFI 217 GHz frequency maps and HFI 353 GHz frequency maps) and their II column corresponding to the noise covariance matrix. Halfrings at the same frequencies. Beam window functions as reported in the LFI and HFI RIMO.

Related products[edit]

None.

File names[edit]

Meta Data[edit]

Low frequency foreground component[edit]

Low frequency component at N$_\rm{side}$ = 256[edit]

File name: COM_CompMap_Lfreqfor-commrul_0256_R1.00.fits

Name HDU -- COMP-MAP

The Fits extension is composed by the columns described below:

FITS header
Column Name Data Type Units Description
I Real*4 uK[math]_{CMB}[/math] Intensity
I_stdev Real*4 uK[math]_{CMB}[/math] standard deviation of intensity
Beta Real*4 effective spectral index
B_stdev Real*4 standard deviation on the effective spectral index
Notes
Comment: The Intensity is normalized at 30 GHz
Comment: The intensity was estimated during mixing matrix estimation
Low frequency component at N$_\rm{side}$ = 2048[edit]
File name: COM_CompMap_Lfreqfor-commrul_2048_R1.00.fits


Name HDU -- COMP-MAP

The Fits extension is composed by the columns described below:

FITS header
Column Name Data Type Units Description
I Real*8 uK[math]_{CMB}[/math] Intensity
I_stdev Real*8 uK[math]_{CMB}[/math] standard deviation of intensity
I_hr1 Real*8 uK[math]_{CMB}[/math] Intensity on half ring 1
I_hr2 Real*8 uK[math]_{CMB}[/math] Intensity on half ring 2
Notes
Comment: The intensity was computed after mixing matrix application


Name HDU -- BeamWF

The Fits second extension is composed by the columns described below:

FITS header
Column Name Data Type Units Description
BeamWF Real*4 beam profile
Notes
Comment: Beam window function used in the Component separation process

Thermal dust[edit]

Thermal dust component at N$_\rm{side}$=256[edit]
File name: COM_CompMap_dust-commrul_0256_R1.00.fits
Name HDU -- COMP-MAP

The Fits extension is composed by the columns described below:

FITS header
Column Name Data Type Units Description
I Real*4 MJy/sr Intensity
I_stdev Real*4 MJy/sr standard deviation of intensity
Em Real*4 emissivity
Em_stdev Real*4 standard deviation on emissivity
T Real*4 uK[math]_{CMB}[/math] temperature
T_stdev Real*4 uK[math]_{CMB}[/math] standard deviation on temerature
Notes
Comment: The intensity is normalized at 353 GHz
Thermal dust component at N$_\rm{side}$=2048[edit]

File name: COM_CompMap_dust-commrul_2048_R1.00.fits


Name HDU -- COMP-MAP

The Fits extension is composed by the columns described below:

FITS header
Column Name Data Type Units Description
I Real*8 MJy/sr Intensity
I_stdev Real*8 MJy/sr standard deviation of intensity
I_hr1 Real*8 MJy/sr Intensity on half ring 1
I_hr2 Real*8 MJy/sr Intensity on half ring 2


Name HDU -- BeamWF

The Fits second extension is composed by the columns described below:

FITS header
Column Name Data Type Units Description
BeamWF Real*4 beam profile
Notes
Comment: Beam window function used in the Component separation process

Sky mask[edit]

File name: COM_CompMap_Mask-rulerminimal_2048.fits

Name HDU -- COMP-MASK

The Fits extension is composed by the columns described below:

FITS header
Column Name Data Type Units Description
Mask Real*4 Mask

Thermal dust emission[edit]

Thermal emission from interstellar dust is captured by Planck-HFI over the whole sky, at all frequencies from 100 to 857 GHz. This emission is well modelled by a modified black body in the far-infrared to millimeter range. It is produced by the biggest interstellar dust grain that are in thermal equilibrium with the radiation field from stars. The grains emission properties in the sub-millimeter are therefore directly linked to their absorption properties in the UV-visible range. By modelling the thermal dust emission in the sub-millimeter, a map of dust reddening in the visible can then be constructed. The details of the model can be found here Planck-2013-XI[7].

Model of all-sky thermal dust emission[edit]

The model of the thermal dust emission is based on a modified black body (MBB) fit to the data [math]I_\nu[/math]

[math]I_\nu = A\, B_\nu(T)\, \nu^\beta[/math]

where [math]B_\nu(T)[/math] is the Planck function for dust equilibirum temperature [math]T[/math], [math]A[/math] is the amplitude of the MBB and [math]\beta[/math] the dust spectral index. The dust optical depth at frequency [math]\nu[/math] is

[math]\tau_\nu = I_\nu / B_\nu(T) = A\, \nu^\beta[/math]

The dust parameters provided are [math]T[/math], [math]\beta[/math] and [math]\tau_{353}[/math]. They were obtained by fitting the Planck data at 353, 545 and 857 GHz (from which the Planck zodiacal light model was removed) together with the IRAS 100 micron data. The latter is a combination of the 100 micron maps from IRIS (Miville-Deschenes & Lagache, 2005) and from Schlegel et al. (1998), SFD1998. The IRIS (SFD1998) map is used at scales smaller (larger) than 30 arcmin; this combination allows to take advantage of the higher angular resolution and better control of gain variations of the IRIS map and of the better removal of the zodiacal light emission of the SFD1998 map.

All maps (in Healpix Nside=2048 were smoothed to a common resolution of 5 arcmin. The CMB anisotropies, clearly visible at 353 GHz, were removed from all the HFI maps using the SMICA map. An offset was removed from each map to set a Galactic zero level, using a correlation with the LAB 21 cm data in diffuse areas of the sky ([math]N_{HI} \lt 2\times10^{20} cm^{-2}[/math]). Because the dust emission is so well correlated between frequencies in the Rayleigh-Jeans part of the dust spectrum, the zero level of the 545 and 353 GHz were improved by correlating with the 857 GHz over a larger mask ([math]N_{HI} \lt 3\times10^{20} cm^{-2}[/math]). Faint residual dipole structures, identified in the 353 and 545 GHz maps, were removed prior to the fit.

The MBB fit was performed using a [math]\chi^2[/math] minimization method, assuming errors for each data point that include instrumental noise, calibration uncertainties (on both the dust emission and the CMB anisotropies) and uncertainties on the zero levels. Because of the known degeneracy between [math]T[/math] and [math]\beta[/math] in the presence of noise, we performed tge fit in two steps. First we produced a model of dust emission using data smoothed to 30 arcmin; at such resolution no systematic bias of the parameters is observed. In a second step the map of the spectral index [math]\beta[/math] at 30 arcmin was used to fit the data for [math]T[/math] and [math]\tau_{353}[/math] at 5 arcmin.

The [math]E(B-V)[/math] map for extra-galactic studies[edit]

For the production of the [math]E(B-V)[/math] map, we used a MBB fit to Planck and IRAS data from which point sources were removed to avoid contamination by galaxies. In the hypothesis of constant dust emission cross-section, the optical depth map [math]\tau_{353}[/math] is proportional to dust column density and therefore often used to estimate E(B-V). The analysis of Planck data revealed that the ratio [math]\tau_{353}/N_{HI}[/math] and [math]\tau_{353}/E(B-V)[/math] are not constant, even in the diffuse ISM, but that they depend on [math]T[/math] revealing possible spatial variations of the dust emission cross-section. It appears that the dust radiance, [math]R[/math], i.e. the dust emission integrated in frequency, is a better tracer of column density in the diffuse ISM, implying small spatial variations of the radiation field strength at high Galactic latitude. Given those results, we also deliver the map of [math]R[/math] as a dust product and we propose to use it as an estimator of Galactic dust reddening for extra-galactic studies: [math]E(B-V) = q\, R[/math].

To estimate the calibration factor q, we followed a method similar to[8] based on SDSS reddening measurements of quasars in the u, g, r, i and z bands[9]. We used a sample of 53 399 quasars, selecting objects at redshifts for which Ly[math]\alpha[/math] does not enter the SDSS filters. The interstellar HI column densities covered on the lines of sight of this sample ranges from [math]0.5[/math] to [math]10\times10^{20}\,cm^{-2}[/math]. Therefore this sample allows us to estimate q in the diffuse ISM where this map of E(B-V) is intended to be used.

Dust optical depth products[edit]

The dust model maps are found in the file HFI_CompMap_ThermalDustModel_2048_R1.20.fits (see the note below for an important clarification regarding the thermal dust model); its characteristics are:

  • Dust optical depth at 353 GHz: Nside=2048, fwhm=5', no units
  • Dust temperature: Nside 2048, fwhm=5', units=Kelvin
  • Dust spectral index: Nside=2048, fwhm=30', no units
  • Dust radiance: Nside=2048, fwhm=5', units=Wm-2sr-1
  • E(B-V) for extragalactic studies: Nside=2048, fwhm=5', units=magnitude, obtained with data from which point sources were removed.


Dust opacity file data structure
1. EXTNAME = 'COMP-MAP'
Column Name Data Type Units Description
TAU353 Real*4 none The optical depth at 353GHz
ERR_TAU Real*4 none Error on the optical depth
EBV Real*4 mag E(B-V) for extra-galactic studies
RADIANCE Real*4 Wm-2sr-1 Integrated emission
TEMP Real*4 K Dust temperature
ERR_TEMP Real*4 K Error on the temperature
BETA Real*4 none Dust spectral index
ERR_BETA Real*4 none Error on Beta
Keyword Data Type Value Description
AST-COMP String DUST Astrophysical compoment name
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 2048 Healpix Nside for LFI and HFI, respectively
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 50331647 Last pixel number, for LFI and HFI, respectively


IMPORTANT NOTE: The dust model has recently (4 December 2013) been updated and the new model is the one being distributed by default. A detailed description of the model can be found here Planck-2013-XI[7]. Users interested in the old dust model map should contact the PLA help desk.

CO emission maps[edit]

CO rotational transition line emission is present in all HFI bands but for the 143 GHz channel. It is especially significant in the 100, 217 and 353 GHz channels (due to the 115 (1-0), 230 (2-1) and 345 GHz (3-2) CO transitions). This emission comes essentially from the Galactic interstellar medium and is mainly located at low and intermediate Galactic latitudes. Three approaches (summarised below) have been used to extract CO velocity-integrated emission maps from HFI maps and to make three types of CO products. A full description of how these products were produced is given in Planck-2013-XIII[10].

  • Type 1 product: it is based on a single channel approach using the fact that each CO line has a slightly different transmission in each bolometer at a given frequency channel. These transmissions can be evaluated from bandpass measurements that were performed on the ground or empirically determined from the sky using existing ground-based CO surveys. From these, the J=1-0, J=2-1 and J=3-2 CO lines can be extracted independently. As this approach is based on individual bolometer maps of a single channel, the resulting Signal-to-Noise ratio (SNR) is relatively low. The benefit, however, is that these maps do not suffer from contamination from other HFI channels (as is the case for the other approaches) and are more reliable, especially in the Galactic Plane.
  • Type 2 product: this product is obtained using a multi frequency approach. Three frequency channel maps are combined to extract the J=1-0 (using the 100, 143 and 353 GHz channels) and J=2-1 (using the 143, 217 and 353 GHz channels) CO maps. Because frequency channels are combined, the spectral behaviour of other foregrounds influences the result. The two type 2 CO maps produced in this way have a higher SNR than the type 1 maps at the cost of a larger possible residual contamination from other diffuse foregrounds.
  • Type 3 product: using prior information on CO line ratios and a multi-frequency component separation method, we construct a combined CO emission map with the largest possible SNR. This type 3 product can be used as a sensitive finder chart for low-intensity diffuse CO emission over the whole sky.

The released Type 1 CO maps have been produced using the MILCA-b algorithm, Type 2 maps using a specific implementation of the Commander algorithm, and the Type 3 map using the full Commander-Ruler component separation pipeline (see above).

Characteristics of the released maps are the following. We provide Healpix maps with Nside=2048. For one transition, the CO velocity-integrated line signal map is given in K_RJ.km/s units. A conversion factor from this unit to the native unit of HFI maps (K_CMB) is provided in the header of the data files and in the RIMO. Four maps are given per transition and per type:

  • The signal map
  • The standard deviation map (same unit as the signal),
  • A null test noise map (same unit as the signal) with similar statistical properties. It is made out of half the difference of half-ring maps.
  • A mask map (0B or 1B) giving the regions (1B) where the CO measurement is not reliable because of some severe identified foreground contamination.

All products of a given type belong to a single file. Type 1 products have the native HFI resolution i.e. approximately 10, 5 and 5 arcminutes for the CO 1-0, 2-1, 3-2 transitions respectively. Type 2 products have a 15 arcminute resolution The Type 3 product has a 5.5 arcminute resolution.


Type-1 CO map file data structure
1. EXTNAME = 'COMP-MAP'
Column Name Data Type Units Description
I10 Real*4 K_RJ km/sec The CO(1-0) intensity map
E10 Real*4 K_RJ km/sec Uncertainty in the CO(1-0) intensity
N10 Real*4 K_RJ km/sec Map built from the half-ring difference maps
M10 Byte none Region over which the CO(1-0) intensity is considered reliable
I21 Real*4 K_RJ km/sec The CO(2-1) intensity map
E21 Real*4 K_RJ km/sec Uncertainty in the CO(2-1) intensity
N21 Real*4 K_RJ km/sec Map built from the half-ring difference maps
M21 Byte none Region over which the CO(2-1) intensity is considered reliable
I32 Real*4 K_RJ km/sec The CO(3-2) intensity map
E32 Real*4 K_RJ km/sec Uncertainty in the CO(3-2) intensity
N32 Real*4 K_RJ km/sec Map built from the half-ring difference maps
M32 Byte none Region over which the CO(3-2) intensity is considered reliable
Keyword Data Type Value Description
AST-COMP string CO-TYPE2 Astrophysical compoment name
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 2048 Healpix Nside for LFI and HFI, respectively
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 50331647 Last pixel number, for LFI and HFI, respectively
CNV 1-0 Real*4 value Factor to convert CO(1-0) intensity to Kcmb (units Kcmb/(Krj*km/s))
CNV 2-1 Real*4 value Factor to convert CO(2-1) intensityto Kcmb (units Kcmb/(Krj*km/s))
CNV 3-2 Real*4 value Factor to convert CO(3-2) intensityto Kcmb (units Kcmb/(Krj*km/s))


Type-2 CO map file data structure
1. EXTNAME = 'COMP-MAP'
Column Name Data Type Units Description
I10 Real*4 K_RJ km/sec The CO(1-0) intensity map
E10 Real*4 K_RJ km/sec Uncertainty in the CO(1-0) intensity
N10 Real*4 K_RJ km/sec Map built from the half-ring difference maps
M10 Byte none Region over which the CO(1-0) intensity is considered reliable
I21 Real*4 K_RJ km/sec The CO(2-1) intensity map
E21 Real*4 K_RJ km/sec Uncertainty in the CO(2-1) intensity
N21 Real*4 K_RJ km/sec Map built from the half-ring difference maps
M21 Byte none Region over which the CO(2-1) intensity is considered reliable
Keyword Data Type Value Description
AST-COMP String CO-TYPE2 Astrophysical compoment name
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 2048 Healpix Nside for LFI and HFI, respectively
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 50331647 Last pixel number, for LFI and HFI, respectively
CNV 1-0 Real*4 value Factor to convert CO(1-0) intensity to Kcmb (units Kcmb/(Krj*km/s))
CNV 2-1 Real*4 value Factor to convert CO(2-1) intensityto Kcmb (units Kcmb/(Krj*km/s))


Type-3 CO map file data structure
1. EXTNAME = 'COMP-MAP'
Column Name Data Type Units Description
INTEN Real*4 K_RJ km/sec The CO intensity map
ERR Real*4 K_RJ km/sec Uncertainty in the intensity
NUL Real*4 K_RJ km/sec Map built from the half-ring difference maps
MASK Byte none Region over which the intensity is considered reliable
Keyword Data Type Value Description
AST-COMP String CO-TYPE1 Astrophysical compoment name
PIXTYPE String HEALPIX
COORDSYS String GALACTIC Coordinate system
ORDERING String NESTED Healpix ordering
NSIDE Int 2048 Healpix Nside for LFI and HFI, respectively
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 50331647 Last pixel number, for LFI and HFI, respectively
CNV Real*4 value Factor to convert to Kcmb (units Kcmb/(Krj*km/s))

References[edit]

  1. 1.01.11.21.31.41.51.61.7 Planck 2013 results: Component separation, Planck Collaboration XII, A&A, in press, (2014).
  2. Component separation methods for the PLANCK mission, S. M. Leach, J.-F. Cardoso, C. Baccigalupi, R. B. Barreiro, M. Betoule, J. Bobin, A. Bonaldi, J. Delabrouille, G. de Zotti, C. Dickinson, H. K. Eriksen, J. González-Nuevo, F. K. Hansen, D. Herranz, M. Le Jeune, M. López-Caniego, E. Martínez-González, M. Massardi, J.-B. Melin, M.-A. Miville-Deschênes, G. Patanchon, S. Prunet, S. Ricciardi, E. Salerno, J. L. Sanz, J.-L. Starck, F. Stivoli, V. Stolyarov, R. Stompor, P. Vielva, A&A, 491, 597-615, (2008).
  3. Multiresolution internal template cleaning: an application to the Wilkinson Microwave Anisotropy Probe 7-yr polarization data, R. Fernández-Cobos, P. Vielva, R. B. Barreiro, E. Martínez-González, MNRAS, 420, 2162-2169, (2012).
  4. Wilkinson Microwave Anisotropy Probe 7-yr constraints on fNL with a fast wavelet estimator, B. Casaponsa, R. B. Barreiro, A. Curto, E. Martínez-González, P. Vielva, MNRAS, 411, 2019-2025, (2011).
  5. 5.05.1 Planck 2013 results: Isotropy and statistics of the CMB, Planck Collaboration XXIII, A&A, in press, (2014).
  6. 6.06.1 Planck 2013 results: The integrated Sachs-Wolfe effect, Planck Collaboration XIX, A&A, in press, (2014).
  7. 7.07.1 Planck 2013 results: All-sky model of thermal dust emission, Planck Collaboration XI, A&A, in press, (2014).
  8. Calibrating Milky Way dust extinction using cosmological sources, E. Mörtsell, A&A, 550, A80, (2013).
  9. The Sloan Digital Sky Survey Quasar Catalog. IV. Fifth Data Release, D. P. Schneider, P. B. Hall, G. T. Richards, M. A. Strauss, D. E. Vanden Berk, S. F. Anderson, W. N. Brandt, X. Fan, S. Jester, J. Gray, J. E. Gunn, M. U. SubbaRao, A. R. Thakar, C. Stoughton, A. S. Szalay, B. Yanny, D. G. York, N. A. Bahcall, J. Barentine, M. R. Blanton, H. Brewington, J. Brinkmann, R. J. Brunner, F. J. Castander, I. Csabai, J. A. Frieman, M. Fukugita, M. Harvanek, D. W. Hogg, Z. Ivezic, S. M. Kent, S. J. Kleinman, G. R. Knapp, R. G. Kron, J. Krzesinski, D. C. Long, R. H. Lupton, A. Nitta, J. R. Pier, D. H. Saxe, Y. Shen, S. A. Snedden, D. H. Weinberg, J. Wu, ApJ, 134, 102-117, (2007).
  10. Planck 2013 results: Galactic CO emission as seen by Planck, Planck Collaboration XIII, A&A, in press, (2014).

Flexible Image Transfer Specification

Cosmic Microwave background

(Planck) Low Frequency Instrument

(Planck) High Frequency Instrument

Full-Width-at-Half-Maximum

Planck Legacy Archive

(Hierarchical Equal Area isoLatitude Pixelation of a sphere, <ref name="Template:Gorski2005">HEALPix: A Framework for High-Resolution Discretization and Fast Analysis of Data Distributed on the Sphere, K. M. Górski, E. Hivon, A. J. Banday, B. D. Wandelt, F. K. Hansen, M. Reinecke, M. Bartelmann, ApJ, 622, 759-771, (2005).

reduced IMO