# Difference between revisions of "Summary LFI"

Line 18: | Line 18: | ||

[[File:Lfi_perf.jpg|thumb|center|655px|<math>^{ \rm a \, }</math> White noise per pixel computed from half-ring difference maps. Those values are within the 1% with the withe noise sensitivity computed directly on the timelines, taking in account the actual mission time minus the manoeuvres and bad-science flagged data | [[File:Lfi_perf.jpg|thumb|center|655px|<math>^{ \rm a \, }</math> White noise per pixel computed from half-ring difference maps. Those values are within the 1% with the withe noise sensitivity computed directly on the timelines, taking in account the actual mission time minus the manoeuvres and bad-science flagged data | ||

<math>^{ \rm b \, }</math> FWHM and ellipticity from scanning beam evaluated fitting Jupiter directly in the timelines. <math>\hspace{50mm} </math> | <math>^{ \rm b \, }</math> FWHM and ellipticity from scanning beam evaluated fitting Jupiter directly in the timelines. <math>\hspace{50mm} </math> | ||

+ | |||

<math>^{ \rm c \, }</math> FWHM and ellipticity from effective beam evaluated as mean from different position on the sky. <math>\hspace{42mm} </math> | <math>^{ \rm c \, }</math> FWHM and ellipticity from effective beam evaluated as mean from different position on the sky. <math>\hspace{42mm} </math> | ||

<math>^{ \rm d \, }</math> FWHM from effective beam evaluated as FWHM<math>_{eff} = \sqrt{\frac{Ω}{2π}} · 2 · \sqrt{2 \log 2}</math>, where Ω is the mean beam solid angle of the effective beam. Those are the values used in the source extraction pipeline {{BibCite|planck2013-p05}} {{P2013|28}} | <math>^{ \rm d \, }</math> FWHM from effective beam evaluated as FWHM<math>_{eff} = \sqrt{\frac{Ω}{2π}} · 2 · \sqrt{2 \log 2}</math>, where Ω is the mean beam solid angle of the effective beam. Those are the values used in the source extraction pipeline {{BibCite|planck2013-p05}} {{P2013|28}} |

## Revision as of 16:23, 4 July 2014

The LFI performance are summarized in Table 1 below. All the details can be found in the LFI data processing paper ^{[1]}Planck-2013-II .

**Table 1. Summary of the LFI performance parameters**

## References[edit]

- ↑
**Planck 2013 results: The Low Frequency Instrument data processing**, Planck Collaboration 2013 II, A&A, in press, (2014). - ↑
**Planck 2013 results: The Planck Catalogue of Compact Sources**, Planck Collaboration XXVIII, A&A, in press, (2014).

(Planck) Low Frequency Instrument

Full-Width-at-Half-Maximum