Summary of LFI data characteristics

From Planck Legacy Archive Wiki
Revision as of 16:23, 4 July 2014 by Lmendes (talk | contribs)
Jump to: navigation, search

The LFI performance are summarized in Table 1 below. All the details can be found in the LFI data processing paper [1]Planck-2013-II .


Table 1. Summary of the LFI performance parameters

[math]^{ \rm a \, }[/math] FWHM and ellipticity from scanning beam evaluated fitting Jupiter directly in the timelines. [math]\hspace{480mm} [/math] [math]^{ \rm b \, }[/math] FWHM from effective beam estimated from the main beam solid angle of the effective beam. Those are the values used in the source extraction pipeline [2]Planck-2013-XXVIII . [math]{\hspace{35mm}}[/math] [math]^{ \rm c \, }[/math] White noise per pixel computed from half-ring difference maps. Those values are within the 1% with the white noise sensitivity computed directly on the timelines, taking in account the actual mission time minus the manoeuvres and bad-science flagged data.


References[edit]

  1. Planck 2013 results: The Low Frequency Instrument data processing, Planck Collaboration 2013 II, A&A, in press, (2014).
  2. Planck 2013 results: The Planck Catalogue of Compact Sources, Planck Collaboration XXVIII, A&A, in press, (2014).

(Planck) Low Frequency Instrument

Full-Width-at-Half-Maximum