Difference between revisions of "Simulation data"

From Planck Legacy Archive Wiki
Jump to: navigation, search
(The Planck Sky Model)
Line 2: Line 2:
  
  
The 2015 Planck data release is supported by a set of simulated maps of the sky, by astrophysical component, and of that sky as seen by Planck (fiducial mission realizations), together with separate  sets  of  Monte  Carlo  realizations of the CMB and the instrument noise. They contain the dominant instrumental (detector beam, bandpass, and correlated noise properties),  scanning  (pointing  and  flags),  and  analysis  (map-making algorithm and implementation) effects.
+
The 2015 Planck data release is supported by a set of simulated maps of the sky, by astrophysical component, and of that sky as seen by Planck (fiducial mission realizations), together with separate  sets  of  Monte  Carlo  realizations of the CMB and the instrument noise. They contain the dominant instrumental (detector beam, bandpass, and correlated noise properties),  scanning  (pointing  and  flags),  and  analysis  (map-making algorithm and implementation) effects. These simulations have been described in {{PlanckPapers|planck2014-a14}}.
  
 
In addition to the baseline maps made from the data from all detectors at a given frequency for the entire mission, there are a number of data cuts that are mapped both for systematics tests and to support cross-spectral analyses. These include
 
In addition to the baseline maps made from the data from all detectors at a given frequency for the entire mission, there are a number of data cuts that are mapped both for systematics tests and to support cross-spectral analyses. These include
Line 22: Line 22:
 
The fiducial realizations include instrument noise, astrophysical foregrounds, and the lensed scalar, tensor, and non-Gaussian CMB components, and are primarily designed to support the validation and verification of analysis codes. To test our ability to detect tensor modes and non-Gaussianity, we generate five CMB realizations with various cosmologically interesting -- but undeclared -- values of the tensor-to-scalar ratio '''r''' and non-Gaussianity parameter '''f_{NL}'''.  To investigate the impact of differences in the bandpasses of the detectors at any given frequency, the foreground sky is simulated using both the individual detector bandpasses and a common average bandpass, to include and exclude the effects of bandpass mismatch. To check that the PR2-2015 results are not sensitive to the exact cosmological parameters used in FFP8 we subsequently generated FFP8.1, exactly matching the PR2-2015 cosmology.
 
The fiducial realizations include instrument noise, astrophysical foregrounds, and the lensed scalar, tensor, and non-Gaussian CMB components, and are primarily designed to support the validation and verification of analysis codes. To test our ability to detect tensor modes and non-Gaussianity, we generate five CMB realizations with various cosmologically interesting -- but undeclared -- values of the tensor-to-scalar ratio '''r''' and non-Gaussianity parameter '''f_{NL}'''.  To investigate the impact of differences in the bandpasses of the detectors at any given frequency, the foreground sky is simulated using both the individual detector bandpasses and a common average bandpass, to include and exclude the effects of bandpass mismatch. To check that the PR2-2015 results are not sensitive to the exact cosmological parameters used in FFP8 we subsequently generated FFP8.1, exactly matching the PR2-2015 cosmology.
  
Table 1
+
[[File:A14_Table1_1.png]]
 +
[[File:A14_Table1_2.png]]
 +
[[File:A14_Table1_3.png]]
 +
 
  
 
Since mapmaking is a linear operation, the easiest way to generate all of these different realizations is to build the full set of maps of each of six components:
 
Since mapmaking is a linear operation, the easiest way to generate all of these different realizations is to build the full set of maps of each of six components:
Line 37: Line 40:
 
While the full set of maps can be generated for the fiducial cases, for the 10^4-realization MC sets this would result in some 10^7 maps and require about $6$\,PB of storage. Instead, therefore, the number of realizations generated for each type of map is chosen to balance the improved statistics it supports against the computational cost of its generation and storage. The remaining noise MCs sample broadly across all data cuts, while the additional CMB MCs are focused on the channel/half-mission/full maps and the subset of the detset/mission/full maps required by the "commander" component separation code {{PlanckPapers|planck2014-a12}}.
 
While the full set of maps can be generated for the fiducial cases, for the 10^4-realization MC sets this would result in some 10^7 maps and require about $6$\,PB of storage. Instead, therefore, the number of realizations generated for each type of map is chosen to balance the improved statistics it supports against the computational cost of its generation and storage. The remaining noise MCs sample broadly across all data cuts, while the additional CMB MCs are focused on the channel/half-mission/full maps and the subset of the detset/mission/full maps required by the "commander" component separation code {{PlanckPapers|planck2014-a12}}.
  
 +
The goal of FFP8 is to simulate the Planck mission as accurately as possible; however, there are a number of known systematic effects that are not included, either because they are removed in the pre-processing of the time-ordered data (TOD), or because they are insufficiently well-characterized to simulate reliably, or because their inclusion (simulation and removal) would be too computationally expensive. These systematic effects are discussed in detail in {{PlanckPapers|planck2014-a03}} and {{PlanckPapers|planck2014-a08}} and include:
 +
 +
# cosmic ray glitches (HFI);
 +
# spurious spectral lines from the 4-K cooler electronics (HFI);
 +
# nonlinearity in the analogue-to-digital converter (HFI);
 +
# imperfect reconstruction of the focal plane geometry.
 +
 +
Note that if the residuals from the treatment of any of these effects could be mapped in isolation, then maps of such systematics could simply be added to the existing FFP8 maps to improve their correspondence to the real data.
  
 
== The Planck Sky Model ==
 
== The Planck Sky Model ==
Line 52: Line 63:
 
[[File:A14_Table3_CosmoParams.png]]
 
[[File:A14_Table3_CosmoParams.png]]
  
The Galactic ISM emission comprises five components: thermal dust, spinning dust, synchrotron, CO lines, and free-free emission. We refer the reader to the PSM publication for details. For the simulations generated here, however, the thermal dust model has been modified in the following way: instead of being based on the 100 micron map of Schlegel, Finkbeiner and Davis (2008){{BibCite|schlegel1998}}, henceforth SFB, the dust template uses an internal release of the 857 GHz Planck observed map itself, in which point sources have been subtracted, and which has been locally filtered to remove CIB fluctuations in the regions of lowest column density. A caveat is that while this reduces the level of CIB fluctuations in the dust map in some of the regions, in regions of moderate dust column density the CIB contamination is actually somewhat larger than in the SFD map (by reason of different emission laws for dust and CIB, and of the higher resolution of the Planck map).
+
The foreground components generated by the PSM are diffuse Galactic emission from thermal dust, spinning dust, relativistic electrons (synchrotron emission), free-free radiation, and CO (the $J$=1$\rightarrow$0, $J$=2$\rightarrow$1, and $J$=3$\rightarrow$2 lines at $115.27$, $230.54$, and $345.80$\,GHz, respectively),
 +
 
 +
The Galactic ISM emission comprises five components: thermal dust, spinning dust, synchrotron, free-free, CO lines (the J=1->0, J=2->1, and J=3->2 lines at $115.27$, $230.54$, and $345.80$\,GHz, respectively), and plus the cosmic infrared background (CIB), emission from radio sources, and the thermal and kinetic Sunyaev-Zeldovich (SZ) effects.
 +
 
 +
The thermal dust emission is modelled using single-frequency template maps of the intensity and polarization, together with a pixel-dependent emission law. For  FFP8  the  thermal  dust  emission  templates  are  derived from the Planck 353 GHz observations.
 +
 
 +
The spinning-dust map used for FFP8 simulations is a simple realization of the spinning dust model, post-processed to remove negative values occurring in a few pixels because of the generation of small-scale fluctuations on top of the spinning dust template  extracted  from  WMAP  data.
 +
 
 +
The FFP8 synchrotron emission is modelled on the basis of the template emission map observed at 408 MHz by Haslam et al. (1982). This template synchrotron map is extrapolated in frequency using a spectral index map corresponding to a simple power law.
 +
 
 +
The free-free spectral dependence is modelled in FFP8 by assuming a constant electron temperature $T_{e} = 7000$ K, as described in \cite{2003MNRAS.341..369D}.
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
See {{PlanckPapers|planck2014-a14}} for more details.
 +
 
 +
 
 +
We refer the reader to the PSM publication for details. For the simulations generated here, however, the thermal dust model has been modified in the following way: instead of being based on the 100 micron map of Schlegel, Finkbeiner and Davis (2008){{BibCite|schlegel1998}}, henceforth SFB, the dust template uses an internal release of the 857 GHz Planck observed map itself, in which point sources have been subtracted, and which has been locally filtered to remove CIB fluctuations in the regions of lowest column density. A caveat is that while this reduces the level of CIB fluctuations in the dust map in some of the regions, in regions of moderate dust column density the CIB contamination is actually somewhat larger than in the SFD map (by reason of different emission laws for dust and CIB, and of the higher resolution of the Planck map).
  
 
The other emissions of the galactic ISM are simulated using the prescription described in the PSM paper. Synchrotron, free-free and spinning dust emission are based on WMAP observations, as analyzed by Miville-Deschenes et al. (2008){{BibCite|Miville2008}}. Small scale fluctuations have been added to increase the variance on small scales and compensate the lower resolution of WMAP as compared to Planck (in particular for the HFI channels). The main limitation of these maps is the presence at high galactic latitude of fluctuations that may be attributed to WMAP noise. The presence of noise and of added Gaussian fluctuations on small scales may result in a few occasional pixels being negative (e.g. in the spinning dust maps). Low frequency foreground maps are also contaminated by some residuals of bright radio sources that have not been properly subtracted from the templates of diffuse emission.
 
The other emissions of the galactic ISM are simulated using the prescription described in the PSM paper. Synchrotron, free-free and spinning dust emission are based on WMAP observations, as analyzed by Miville-Deschenes et al. (2008){{BibCite|Miville2008}}. Small scale fluctuations have been added to increase the variance on small scales and compensate the lower resolution of WMAP as compared to Planck (in particular for the HFI channels). The main limitation of these maps is the presence at high galactic latitude of fluctuations that may be attributed to WMAP noise. The presence of noise and of added Gaussian fluctuations on small scales may result in a few occasional pixels being negative (e.g. in the spinning dust maps). Low frequency foreground maps are also contaminated by some residuals of bright radio sources that have not been properly subtracted from the templates of diffuse emission.

Revision as of 10:22, 3 February 2016

Introduction[edit]

The 2015 Planck data release is supported by a set of simulated maps of the sky, by astrophysical component, and of that sky as seen by Planck (fiducial mission realizations), together with separate sets of Monte Carlo realizations of the CMB and the instrument noise. They contain the dominant instrumental (detector beam, bandpass, and correlated noise properties), scanning (pointing and flags), and analysis (map-making algorithm and implementation) effects. These simulations have been described in Planck-2015-A12[1].

In addition to the baseline maps made from the data from all detectors at a given frequency for the entire mission, there are a number of data cuts that are mapped both for systematics tests and to support cross-spectral analyses. These include

  1. detector subsets (“detsets”), comprising the individual unpolarized detectors and the polarized detector quadruplets corresponding to each leading trailing horn pair. Note that HFI sometimes refers to full channels as detset0; here detset only refers to subsets of detectors.
  2. mission subsets, comprising the surveys, years, and half-missions, with exact boundary definitions given in Planck-2015-A02[2] and Planck-2015-A07[3] for LFI and HFI, respectively.
  3. half-ring subsets, comprising the data from either the first or the second half of each pointing-period ring

The various combinations of these data cuts then define 1134 maps, as enumerated in the top section of Table 1 from Planck-2015-A12[1]. The different types of map are then named according to their included detectors (channel or detset), interval (mission, half-mission, year or survey), and ring-content (full or half-ring); for example the baseline maps are described as channel/mission/full, etc.

The simulation process consists of

  1. modeling each astrophysical component of the sky emission for each Planck detector, using Planck data and the relevant characteristics of the Planck instruments.
  2. simulating each detector's observation of each sky component following the Planck scanning strategy and using the best estimates of the detector's beam and noise properties (obtained in flight), then combining these timelines into a single one per detector, and projecting these simulated timelines onto observed maps (the fiducial sky), as is done with the on-orbit data;
  3. generating Monte Carlo realizations of the CMB and of the noise, again following the Planck scanning strategy and using our best estimates of the detector beams and noise properties respectively.

The first step is performed by the Planck Sky Model (PSM), and the last two by the Planck Simulation Tools (PST), both of which are described in the sections below.

The production of a full focal plane (FFP) simulation, and including the many MC realizations of the CMB and the noise, requires both HFI and LFI data and includes large, computationally challenging, MC realizations. They are too large to be generated on either of the DPC's own cluster. Instead the PST consists of three distinct tools, each designed to run on the largest available supercomputers, that are used to generate the fiducial sky realization, the CMB MC, and the noise MC respectively. The simulations delivered here are part of the 8th generation FFP simulations, known as FFP8. They were primarily generated on the National Energy Research Scientific Computing Center (NERSC) in the USA and at CSC–IT Center for Science (CSC) in Finland.

The fiducial realizations include instrument noise, astrophysical foregrounds, and the lensed scalar, tensor, and non-Gaussian CMB components, and are primarily designed to support the validation and verification of analysis codes. To test our ability to detect tensor modes and non-Gaussianity, we generate five CMB realizations with various cosmologically interesting -- but undeclared -- values of the tensor-to-scalar ratio r and non-Gaussianity parameter f_{NL}. To investigate the impact of differences in the bandpasses of the detectors at any given frequency, the foreground sky is simulated using both the individual detector bandpasses and a common average bandpass, to include and exclude the effects of bandpass mismatch. To check that the PR2-2015 results are not sensitive to the exact cosmological parameters used in FFP8 we subsequently generated FFP8.1, exactly matching the PR2-2015 cosmology.

A14 Table1 1.png A14 Table1 2.png A14 Table1 3.png


Since mapmaking is a linear operation, the easiest way to generate all of these different realizations is to build the full set of maps of each of six components:

  1. the lensed scalar CMB ({\tt cmb\_scl});
  2. the tensor CMB ({\tt cmb\_ten});
  3. the non-Gaussian complement CMB ({\tt cmb\_ngc});
  4. the forgreounds including bandpass mismatch ({\tt fg\_bpm});
  5. the foregrounds excluding bandpass mismatch ({\tt fg\_nobpm});
  6. the noise (noise).

We then sum these, weighting the tensor and non-Gaussian complement maps with \sqrt{r} and f_{\rm NL}, respectively, and including one of the two foreground maps, to produce 10 total maps of each type. The complete fiducial data set then comprises 18,144 maps.

While the full set of maps can be generated for the fiducial cases, for the 10^4-realization MC sets this would result in some 10^7 maps and require about $6$\,PB of storage. Instead, therefore, the number of realizations generated for each type of map is chosen to balance the improved statistics it supports against the computational cost of its generation and storage. The remaining noise MCs sample broadly across all data cuts, while the additional CMB MCs are focused on the channel/half-mission/full maps and the subset of the detset/mission/full maps required by the "commander" component separation code Planck-2015-A10[4].

The goal of FFP8 is to simulate the Planck mission as accurately as possible; however, there are a number of known systematic effects that are not included, either because they are removed in the pre-processing of the time-ordered data (TOD), or because they are insufficiently well-characterized to simulate reliably, or because their inclusion (simulation and removal) would be too computationally expensive. These systematic effects are discussed in detail in Planck-2015-A02[2] and Planck-2015-A07[3] and include:

  1. cosmic ray glitches (HFI);
  2. spurious spectral lines from the 4-K cooler electronics (HFI);
  3. nonlinearity in the analogue-to-digital converter (HFI);
  4. imperfect reconstruction of the focal plane geometry.

Note that if the residuals from the treatment of any of these effects could be mapped in isolation, then maps of such systematics could simply be added to the existing FFP8 maps to improve their correspondence to the real data.

The Planck Sky Model[edit]

Overall description[edit]

The Planck Sky Model, PSM, consists of a set of data and of code used to simulate sky emission at millimeter-wave frequencies; it is described in detail in Delabrouille et al., (2013)[5], henceforth the PSM paper..

The Planck Sky Model is available here: http://www.apc.univ-paris7.fr/~delabrou/PSM/psm.html

The main simulations used to test and validate the Planck data analysis pipelines (and, in particular, component separation) makes use of simulations generated with version 1.9 of the PSM software. The total sky emission is built from the CMB plus ten foreground components, namely thermal dust, spinning dust, synchrotron, CO lines, free-free, thermal Sunyaev-Zel'dovich (SZ) effect (with first order relativistic corrections), kinetic SZ effect, radio and infrared sources, Cosmic Infrared Background (CIB).

The CMB is modeled using CAMB. It is based on adiabatic initial perturbations, with the following cosmological parameters:

A14 Table3 CosmoParams.png

The foreground components generated by the PSM are diffuse Galactic emission from thermal dust, spinning dust, relativistic electrons (synchrotron emission), free-free radiation, and CO (the $J$=1$\rightarrow$0, $J$=2$\rightarrow$1, and $J$=3$\rightarrow$2 lines at $115.27$, $230.54$, and $345.80$\,GHz, respectively),

The Galactic ISM emission comprises five components: thermal dust, spinning dust, synchrotron, free-free, CO lines (the J=1->0, J=2->1, and J=3->2 lines at $115.27$, $230.54$, and $345.80$\,GHz, respectively), and plus the cosmic infrared background (CIB), emission from radio sources, and the thermal and kinetic Sunyaev-Zeldovich (SZ) effects.

The thermal dust emission is modelled using single-frequency template maps of the intensity and polarization, together with a pixel-dependent emission law. For FFP8 the thermal dust emission templates are derived from the Planck 353 GHz observations.

The spinning-dust map used for FFP8 simulations is a simple realization of the spinning dust model, post-processed to remove negative values occurring in a few pixels because of the generation of small-scale fluctuations on top of the spinning dust template extracted from WMAP data.

The FFP8 synchrotron emission is modelled on the basis of the template emission map observed at 408 MHz by Haslam et al. (1982). This template synchrotron map is extrapolated in frequency using a spectral index map corresponding to a simple power law.

The free-free spectral dependence is modelled in FFP8 by assuming a constant electron temperature $T_{e} = 7000$ K, as described in \cite{2003MNRAS.341..369D}.





See Planck-2015-A12[1] for more details.


We refer the reader to the PSM publication for details. For the simulations generated here, however, the thermal dust model has been modified in the following way: instead of being based on the 100 micron map of Schlegel, Finkbeiner and Davis (2008)[6], henceforth SFB, the dust template uses an internal release of the 857 GHz Planck observed map itself, in which point sources have been subtracted, and which has been locally filtered to remove CIB fluctuations in the regions of lowest column density. A caveat is that while this reduces the level of CIB fluctuations in the dust map in some of the regions, in regions of moderate dust column density the CIB contamination is actually somewhat larger than in the SFD map (by reason of different emission laws for dust and CIB, and of the higher resolution of the Planck map).

The other emissions of the galactic ISM are simulated using the prescription described in the PSM paper. Synchrotron, free-free and spinning dust emission are based on WMAP observations, as analyzed by Miville-Deschenes et al. (2008)[7]. Small scale fluctuations have been added to increase the variance on small scales and compensate the lower resolution of WMAP as compared to Planck (in particular for the HFI channels). The main limitation of these maps is the presence at high galactic latitude of fluctuations that may be attributed to WMAP noise. The presence of noise and of added Gaussian fluctuations on small scales may result in a few occasional pixels being negative (e.g. in the spinning dust maps). Low frequency foreground maps are also contaminated by some residuals of bright radio sources that have not been properly subtracted from the templates of diffuse emission.

The CO maps are simulated using the CO J=1-0 observations of Dame et al. (2001)[8]. The main limitations are limited sky coverage, lower resolution than that of Planck high frequency channels, line ratios (J=2-1)/(J=1-0) and (J=3-2)/(J=2-1) constant over the sky. The CO in the simulation is limited to the three lowest 12CO lines. No CO maps has been simulated at the LFI frequnecy (30, 44 and 70 GHz).

Galaxy clusters are generated on the basis of cluster number counts, following the Tinker et al. (2008)[9] mass function, for the cosmological parameters listed above. Clusters are assumed perfectly spherical, isothermal, and are modeled using the universal pressure profile of Arnaud et al. (2010)[10]. Relativistic corrections following Itoh et al. (1998)[11] are included to first order. The simulated kinetic SZ effect assumes no bulk flow, and a redshift-dependent average cluster velocity compatible with the linear growth of structures.

Point sources comprise radio sources (based on extrapolations across frequencies of radio observations between 800 MHz and 5 GHz) and infrared sources (based on extrapolations in frequencies of IRAS sources). One caveat is that due to the unevenness of the radio source surveys, the equatorial southern part of the sky has less faint radio sources than the northern part. Although all the missing sources are well below the Planck detection level, this induces a small variation of the total emission background over the sky. Check the individual faint point source emission maps if this is a potential problem for your applications. See also the PSM paper for details about the PSM point source simulations. The PSM separates bright and faint point source; the former are initially in a catalog, and the latter in a map, though a map of the former can also be produced. In the processing below, the bright sources are simulated via the catalog, but for convenience they are delivered as a map.

Finally, the far infrared background due to high redshift galaxies has been simulated using a procedure is based on the distribution of galaxies in shells of density contrast at various redshifts (Castex et al., PhD thesis; paper in preparation). This simulation has been modified by gradually substituting an uncorrelated extra term of CIB emission at low frequencies, artificially added in particular to decorrelate the CIB at frequencies below 217 GHz from the CIB above that frequency, to mimic the apparent decorrelation observed in the Planck Early Paper on CIB power spectrum (Planck-Early-XVIII[12]).

While the PSM simulations described here provide a reasonably representative multi-component model of sky emission, users are warned that it has been put together mostly on the basis of data sets and knowledge pre-existing the Planck observations themselves. While it is sophisticated enough to include variations of emission laws of major components of the ISM emission, different emission laws for most sources, and a reasonably coherent global picture, it is not (and is not supposed to be) identical to the real sky emission. The users are warned to use these simulations with caution.

PSM Products[edit]

To build maps corresponding to the Planck channels, the models described above are convolved with the spectral response of the channel in question. The products given here are for the full frequency channels, and as such they are not used in the Planck specific simulations, which use only individual detector channels. The frequency channel spectral responses used (given in the RIMO), are averages of the responses of the detectors of each frequency channel weighted as they are in the mapmaking step. They are provided for the purpose of testing user's own software of simulations and component separation.

PSM maps of the CMB and of the ten foregrounds are given in the following map products:

HFI

LFI


Each file contains a single BINTABLE extension with either a single map (for the CMB file) or one map for each HFI/LFI frequency (for the foreground components). In the latter case the columns are named F030, F044 ,F070,F100, F143, … , F857. Units are microKCMB for the CMB, KCMB at 30, 44 and 70 GHz and MJy/sr for the others. The structure is given below for multi-column files.

Note: Original PSM foreground components has been generated at NSIDE 2048 and using a gaussian beam of 4 arcmin, LFI maps where then smoothed to LFI resolution (32.0, 27.0 and 13.0 arcmin for the 30, 44 and 70 GHz) and donwgraded at NSIDE 1024. LFI CMB maps has been smoothed at 13.0 arcmin (70 GHz resolution) and downgraded at NSIDE 1024.

HFI FITS file structure
1. EXTNAME = 'SIM-MAP' : Data columns
Column Name Data Type Units Description
F100 Real*4 MJy/sr 100GHz signal map
F143 Real*4 MJy/sr 143GHz signal map
F217 Real*4 MJy/sr 217GHz signal map
F353 Real*4 MJy/sr 353GHz signal map
F545 Real*4 MJy/sr 545GHz signal map
F857 Real*4 MJy/sr 857GHz signal map
Keyword Data Type Value Description
PIXTYPE string HEALPIX
COMP string component Astrophysical omponent
COORDSYS string GALACTIC Coordinate system
ORDERING string NESTED Healpix ordering
NSIDE Int 2048 Healpix Nside for LFI and HFI, respectively
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 50331647 Last pixel number, for LFI and HFI, respectively
BAD_DATA Real*4 -1.63750E+30 Healpix bad pixel value
BEAMTYPE string GAUSSIAN Type of beam
BEAMSIZE Real*4 size Beam size in arcmin
PSM-VERS string PSM Versions used


LFI FITS file structure
1. EXTNAME = 'SIM-MAP' : Data columns
Column Name Data Type Units Description
F030 Real*4 KCMB 30GHz signal map
F044 Real*4 KCMB 44GHz signal map
F070 Real*4 KCMB 70GHz signal map
Keyword Data Type Value Description
PIXTYPE string HEALPIX
COMP string component Astrophysical omponent
COORDSYS string GALACTIC Coordinate system
ORDERING string NESTED Healpix ordering
NSIDE Int 1024 Healpix Nside for LFI and HFI, respectively
FIRSTPIX Int*4 0 First pixel number
LASTPIX Int*4 12582911 Last pixel number, for LFI and HFI, respectively
BAD_DATA Real*4 -1.63750E+30 Healpix bad pixel value
BEAMTYPE string GAUSSIAN Type of beam
BEAMS_30 Real*4 32.0 Beam size at 30 GHz in arcmin
BEAMS_44 Real*4 27.0 Beam size at 44 GHz in arcmin
BEAMS_70 Real*4 13.0 Beam size at 70 GHz in arcmin
PSM-VERS string PSM Versions used

The Fiducial Sky Simulations[edit]

For each detector, fiducial time-ordered data are generated separately for each of the ten PSM components using the LevelS software[13] as follows:

  • the detector's beam and PSM map are converted to spherical harmonics using beam2alm and anafast respectively;
  • the beam-convolved map value is calculated over a 3-dimensional grid of sky locations and beam orientations using conviqt;
  • the map-based timelines are calculated sample-by-sample by interpolating over this grid using multimod;
  • the catalogue-based timelines are produced sample-by-sample by beam-convolving any point source laying within a given angular distance of the pointing at each sample time using multimod.

For each frequency, fiducial sky maps are generated for

  • the total signal (i.e. sky + instrument noise), for both the nominal mission and the halfrings thereof (see details)
  • the foreground sky alone (excluding CMB but including noise),
  • the point source sky, and
  • the noise alone

All maps are built using the MADAM destriping map-maker[14] interfaced with the TOAST data abstraction layer . In order to construct the total timelines required by each map, for each detector TOAST reads the various component timelines separately and sums then, and, where necessary, simulates and adds a noise realization time-stream on the fly. HFI frequencies are mapped at HEALPix resolution Nside=2048 using ring-length destriping baselines, while LFI frequencies are mapped at Nside=1024 using 1s baselines.

Products delivered[edit]

A single simulation is delivered, which is divided into two types of products:

1. six files of the full sky signal at each HFI and LFI frequency, and their corresponding halfring maps:

HFI_SimMap_100_2048_R1.10_nominal.fits HFI_SimMap_100_2048_R1.10_nominal_ringhalf_1.fits HFI_SimMap_100_2048_R1.10_nominal_ringhalf_2.fits
HFI_SimMap_143_2048_R1.10_nominal.fits HFI_SimMap_143_2048_R1.10_nominal_ringhalf_1.fits HFI_SimMap_143_2048_R1.10_nominal_ringhalf_2.fits
HFI_SimMap_217_2048_R1.10_nominal.fits HFI_SimMap_217_2048_R1.10_nominal_ringhalf_1.fits HFI_SimMap_217_2048_R1.10_nominal_ringhalf_2.fits
HFI_SimMap_353_2048_R1.10_nominal.fits HFI_SimMap_353_2048_R1.10_nominal_ringhalf_1.fits HFI_SimMap_353_2048_R1.10_nominal_ringhalf_2.fits
HFI_SimMap_545_2048_R1.10_nominal.fits HFI_SimMap_545_2048_R1.10_nominal_ringhalf_1.fits HFI_SimMap_545_2048_R1.10_nominal_ringhalf_2.fits
HFI_SimMap_857_2048_R1.10_nominal.fits HFI_SimMap_857_2048_R1.10_nominal_ringhalf_1.fits HFI_SimMap_857_2048_R1.10_nominal_ringhalf_2.fits


LFI_SimMap_030_1024_R1.10_nominal.fits LFI_SimMap_030_1024_R1.10_nominal_ringhalf_1.fits LFI_SimMap_030_1024_R1.10_nominal_ringhalf_2.fits
LFI_SimMap_044_1024_R1.10_nominal.fits LFI_SimMap_044_1024_R1.10_nominal_ringhalf_1.fits LFI_SimMap_044_1024_R1.10_nominal_ringhalf_2.fits
LFI_SimMap_070_1024_R1.10_nominal.fits LFI_SimMap_070_1024_R1.10_nominal_ringhalf_1.fits LFI_SimMap_070_1024_R1.10_nominal_ringhalf_2.fits


These files have the same structure as the equivalent SkyMap products described in the Frequency Maps chapter, namely one BINTABLE extension with three columns containing 1) Signal, 2) hit-count, and 3) variance. Units are KCMB for all channels.

2. Three files containing 1) the sum of all astrophysical foregrounds, 2) the point sources alone, and 3) the noise alone: which are subproducts of the above, and are in the form of the PSM maps described in the previous section.

These files have the same structure as the PSM output maps described above, namely a single BINTABLE extension with 6 columns named F100 -- F857 each containing the given map for that HFI band and with 3 columns named F030, F044, F070 each containing the given map for that LFI band. Units are alway KCMB.

Note that the CMB alone is not delivered as a separate product, but it can be recovered by simple subtraction of the component maps for the total signal map.

Monte Carlo realizations of CMB and of noise[edit]

The CMB MC set is generated using FEBeCoP[15], which generates an effective beam for each pixel in a map at each frequency by accumulating the weights of all pixels within a fixed distance of that pixel, summed over all observations by all detectors at that frequency. It then applies this effective beam pixel-by-pixel to each of 1000 input CMB sky realizations.

The noise MC set is generated just as the fiducial noise maps, using MADAM/TOAST. In order to avoid spurious correlations within and between the 1000 realizations, each stationary interval for each detector for each realization is generated from a distinct sub-sequence of a single statistically robust, extremely long period, pseudo-random number sequence.

Products delivered[edit]

100 realizations of the CMB (lensed) and of the noise are made available. They are named

  • HFI_SimMap_cmb-{nnnn}_2048_R1.nn_nominal.fits
  • HFI_SimMap_noise-{nnnn}_2048_R1.nn_nominal.fits
  • LFI_SimMap_cmb-{nnnn}_2048_R1.nn_nominal.fits
  • LFI_SimMap_noise-{nnnn}_2048_R1.nn_nominal.fits

where nnnn ranges from 0000 to 0099.

The FITS file structure is the same as for the other similar products above, with a single BINTABLE extension with six columns, one for each HFI frequency, named F100, F143, … , F857 and with three columns, one for each LFI frequency, named F030, F044, F070. Units are always microKCMB(NB: due to an error in the HFI file construction, the unit keywords in the headers indicate KCMB, the "micro" is missing there).


Products delivered in PLA[edit]

In the Planck Legacy Archive, the 2015 simulations are delivered as follows :

  • 1000 Monte-Carlo realizations from the ffp8 series (noise and CMB scalar) - full maps only
  • the 1001 Monte-Carlo realizations from the ffp9 series (CMB scalar only) - full maps only
  • the ffp8 fiducial sky for band-pass mismatch and no band-pass mismatch

The files can be found in the PLA in Maps - Advanced search - Simulated maps search.

All the rest of the ffp8 and ffp9 simulations can be found on NERSC at /project/projectdirs/planck/data/


Lensing Simulations[edit]

The lensing simulations package contains 100 realisations of the Planck 2014 "MV" lensing potential estimate, as well as the input lensing realizations. They can be used to determine error bars as well eas effective normalizations for cross-correlation with other tracers of lensing. These simulations are of the lensing convergence map contained in the Lensing map release file. The production and characterisation of this lensing potential map are described in detail in [16], which also describes the procedure used to generate the realizations given here.


The simulations are delivered as a gzipped tarball of approximately 8 GB in size. For delivery purposes, the package has been split into 2GB chunks using the unix command

split -d -b 2048m

After downloading the individual chunks, the full tarball can be reconstructed with the command

cat COM_SimMap_Lensing_R0.00.tar.* | tar xvf -


The contents of the tarball are described below:

Contents of COM_SimMap_Lensing_2048_R0.00.tgz
Filename Format Description
obs_klms/sim_????_klm.fits HEALPIX FITS format alm, with [math] L_{\rm max} = 2048 [/math] Contains the simulated convergence estimate [math] \hat{\kappa}_{LM} = \frac{1}{2} L(L+1)\hat{\phi}_{LM} [/math] for each simulation.
sky_klms/sim_????_klm.fits HEALPIX FITS format alm, with [math] L_{\rm max} = 2048 [/math] Contains the input lensing convergence for each simulation.
inputs/mask.fits.gz HEALPIX FITS format map, with [math] N_{\rm side} = 2048 [/math] Contains the lens reconstruction analysis mask.
inputs/cls/cl??.dat ASCII text file, with columns = ([math]L[/math], [math]C_L [/math]) Contains the fiducial theory CMB power spectra for TT, EE, BB, [math] \kappa \kappa [/math] and [math] T \kappa [/math], with temperature and polarization in units of [math] \mu K [/math].

References[edit]

  1. 1.01.11.2 Planck 2015 results. XII. Full Focal Plane Simulations, Planck Collaboration, 2016, A&A, 594, A12.
  2. 2.02.1 Planck 2015 results. II. LFI processing, Planck Collaboration, 2016, A&A, 594, A2.
  3. 3.03.1 Planck 2015 results. VII. High Frequency Instrument data processing: Time-ordered information and beam processing, Planck Collaboration, 2016, A&A, 594, A7.
  4. Planck 2015 results. X. Diffuse component separation: Foreground maps, Planck Collaboration, 2016, A&A, 594, A10.
  5. The pre-launch Planck Sky Model: a model of sky emission at submillimetre to centimetre wavelengths, J. Delabrouille, M. Betoule, J.-B. Melin, M.-A. Miville-Deschênes, J. Gonzalez-Nuevo, M. Le Jeune, G. Castex, G. de Zotti, S. Basak, M. Ashdown, J. Aumont, C. Baccigalupi, A. Banday, J.-P. Bernard, F. R. Bouchet, D. L. Clements, A. da Silva, C. Dickinson, F. Dodu, K. Dolag, F. Elsner, L. Fauvet, G. Fa&yuml, G. Giardino, S. Leach, J. Lesgourgues, M. Liguori, J. F. Macias-Perez, M. Massardi, S. Matarrese, P. Mazzotta, L. Montier, S. Mottet, R. Paladini, B. Partridge, R. Piffaretti, G. Prezeau, S. Prunet, S. Ricciardi, M. Roman, B. Schaefer, L. Toffolatti, A&A, 553, A96, (2013).
  6. Maps of Dust Infrared Emission for Use in Estimation of Reddening and Cosmic Microwave Background Radiation Foregrounds, D. J. Schlegel, D. P. Finkbeiner, M. Davis, ApJ, 500, 525-+, (1998).
  7. Separation of anomalous and synchrotron emissions using WMAP polarization data, M.-A. Deschênes, N. Ysard, A. Lavabre, N. Ponthieu, J. F. Macías-Pérez, J. Aumont, J. P. Bernard, A&A, 490, 1093-1102, (2008).
  8. The Milky Way in Molecular Clouds: A New Complete CO Survey, T. M. Dame, D. Hartmann, P. Thaddeus, ApJ, 547, 792-813, (2001).
  9. Toward a Halo Mass Function for Precision Cosmology: The Limits of Universality, J. Tinker, A. V. Kravtsov, A. Klypin, K. Abazajian, M. Warren, G. Yepes, S. Gottlöber, D. E. Holz, ApJ, 688, 709-728, (2008).
  10. The universal galaxy cluster pressure profile from a representative sample of nearby systems (REXCESS) and the Y_SZ - M_500 relation, M. Arnaud, G. W. Pratt, R. Piffaretti, H. Böhringer, J. H. Croston, E. Pointecouteau, ApJ, 517, A92, (2010).
  11. Relativistic Corrections to the Sunyaev-Zeldovich Effect for Clusters of Galaxies. II. Inclusion of Peculiar Velocities, S. Nozawa, N. Itoh, Y. Kohyama, ApJ, 508, 17-24, (1998).
  12. Planck early results. XVIII. The power spectrum of cosmic infrared background anisotropies, Planck Collaboration XVIII, A&A, 536, A18, (2011).
  13. A simulation pipeline for the Planck mission, M. Reinecke, K. Dolag, R. Hell, M. Bartelmann, T. A. Enßlin, A&A, 445, 373-373, (2006).
  14. Making cosmic microwave background temperature and polarization maps with MADAM, E. Keihänen, R. Keskitalo, H. Kurki-Suonio, T. Poutanen, A.-S. Sirviö, A&A, 510, A57+, (2010).
  15. Fast Pixel Space Convolution for Cosmic Microwave Background Surveys with Asymmetric Beams and Complex Scan Strategies: FEBeCoP, S. Mitra, G. Rocha, K. M. Górski, K. M. Huffenberger, H. K. Eriksen, M. A. J. Ashdown, C. R. Lawrence, ApJS, 193, 5-+, (2011).

Cosmic Microwave background

(Planck) High Frequency Instrument

(Planck) Low Frequency Instrument

Planck Sky Model

Data Processing Center

Sunyaev-Zel'dovich

Flexible Image Transfer Specification

(Hierarchical Equal Area isoLatitude Pixelation of a sphere, <ref name="Template:Gorski2005">HEALPix: A Framework for High-Resolution Discretization and Fast Analysis of Data Distributed on the Sphere, K. M. Górski, E. Hivon, A. J. Banday, B. D. Wandelt, F. K. Hansen, M. Reinecke, M. Bartelmann, ApJ, 622, 759-771, (2005).

Planck Legacy Archive